Реализованы команды w п weather погода погодка погадка без аргументов

* Берём список каналов из конфига (пока что хардкод)
* Добавлен канальчик webapp-go для новой реализации веб-клиента (пока команды cat и кис)

.golangci.yml

@@ -0,0 +1,67 @@
+run:
+  tests: false
+  skip-dirs:
+    - data
+    - vendor
+  modules-download-mode: readonly
+  allow-parallel-runners: true
+  go: '1.21'
+output:
+  sort-results: true
+linters-settings:
+  gosec:
+    excludes:
+      # Оно не используется для повышения безопасности или каких-то таких секъюрных вещей, оно используется для выборки
+      # произвольного элемента из массива, так что ИДИ НАХУЙ с этой проверкой и не еби мозги липовой безопасностью.
+      - G404 # Insecure random number source (rand)
+linters:
+  disable-all: true
+  enable:
+    - errcheck
+    - gosimple
+    - govet
+    - ineffassign
+    - staticcheck
+    - unused
+    - asasalint
+    - asciicheck
+    - bodyclose
+    - containedctx
+    - contextcheck
+    - decorder
+    - durationcheck
+    - errchkjson
+    - errorlint
+    - exhaustive
+    - exportloopref
+    - gci
+    - ginkgolinter
+    - gocheckcompilerdirectives
+    - gocritic
+    - godot
+    - gofmt
+    - goimports
+    - gosec
+    - gosmopolitan
+    - grouper
+    - importas
+    - ireturn
+    - makezero
+    - mirror
+    - nakedret
+    - nilerr
+    - nilnil
+    - nlreturn
+    - noctx
+    - nolintlint
+    - nonamedreturns
+    - predeclared
+    - promlinter
+    - reassign
+    - revive
+    - rowserrcheck
+    - stylecheck
+    - unconvert
+    - wastedassign
+    - whitespace
+    - wsl

Makefile

@@ -1,7 +1,7 @@
 #!/usr/bin/env gmake -f
 
 GOOPTS=CGO_ENABLED=0
-BUILDOPTS=-ldflags="-s -w" -a -gcflags=all=-l
+BUILDOPTS=-ldflags="-s -w" -a -gcflags=all=-l -trimpath
 
 all: clean build
 
@@ -11,12 +11,10 @@ build:
 clean:
 	go clean
 
-wipe:
-	go clean
-	rm -rf go.{mod,sum}
-
-prep:
-	go mod init main
-	go mod tidy -compat=1.18
+upgrade:
+	rm -rf vendor
+	go get -d -u -t ./...
+	go mod tidy
+	go mod vendor
 
 # vim: set ft=make noet ai ts=4 sw=4 sts=4:

README

@@ -1,111 +0,0 @@
-aleesa-misc-go
------------------------------------------------------------------------------------------------------------------------
-Основной роутер команд для aleesa-bot. Все протокольные плагины шлют команды сюда, а отсюда команды разлетаются в
-модули-исполнители и ответ от исполнителей идёт обратно заказчику.
-Работает по протоколу Redis pubsub.
-
-
-Механика работы
------------------------------------------------------------------------------------------------------------------------
-Роутер подписан на канал misc (тот, который указан в поле channel конфига).
-
-Модули, реализующие "клиентские протоколы" - telegram, irc, jabber и проч, подписаны на канал своего протокола.
-Входящие сообщения они получают только через этот канал.
-
-Модули, реализующие иную функциональность также подписаны каждый на свой канал. Кроме того, для реализации
-дополнительных синхронных возможностей, они могут слушать например http запросы на отдельных - ip:портах. Но это уже
-модуль-специфичная настройка.
-
-Формат протокола - это json с полями:
-from    - модуль (по сути, redis-канал), в который надо ответить
-chatid  - чат, из которого прилетело сообщение
-userid  - пользователь, на чью фразу мы отвечаем, или пользователь, для которого предназначается ответ
-message - текст сообщения
-plugin  - первоначальный источник (по сути, redis-канал) сообщения.
-mode    - public или private
-
-misc    - объект с дополнительными полями:
-
-misc->answer       - 0 если ответ не требуется и 1 если ответ требуется (использован в модуле craniac), значение
-                   по-умолчанию 1, если поля нет.
-
-misc->bot_nick     - ник бота. Типа как, для разных чятов он может быть разный. (Использовано в модуле craniac.) Если
-                   поле отсутствует, проверка на обращение к боту по нику не происходит.
-
-misc->csign        - command sign - значок, которым предваряется команда в чятике. Исторически сложилось так, что для
-                   разных ботов этот символ был разный, например, eggdrop использовал точку, а sulci - восклицательный
-                   знак. По-умолчанию, aleesa-bot вездепроставляет восклицательный знак, если во входящем сообщении
-                   такой настройки нету. Изначально настройка задаётся в конфиге чат-модуля (aleesa-telegram,
-                   например).
-
-misc->fwd_cnt      - количество пересылок сообщения. Значение по-умолчанию 1. Предполагается, что при пересылке
-                   сообщения, модуль будет инкрементировать это значение и заодно проверять, что оно не превышает
-                   настройку forwards_max в конфиге или 5, если в конфиге такой настройки нету.
-
-misc->good_morning - флажок признака сообщения-фразы дня, которая по идее осылается в ~8 часов по мск. Используется в
-                   модуле phrases.
-
-misc->msg_format   - Использовать форматирование в сообщении. На текущий момент этот флажок выставляется в модуле
-                   telegram и благополучно проходит через модуль misc, далее попадает в модуль phrases, и, наконец,
-                   возвращается в модуль telegram, чтобы выходное сообщение было отослано как отформатированное.
-
-misc->username     - имя пользователя, по которому к нему надо обратиться в ответе (используется в модуле games). Для
-                   telegram это фактически ссылка на пользователя, как правило с его firstname и lastname (или
-                   @username, если firstname и lastname у него нету), чтобы его можно было захайлатить.
-
-
-Как это собрать?
------------------------------------------------------------------------------------------------------------------------
-Понадобится golang версии 1.18 или более новая.
-
-Сам процесс сборки простой, достаточно запустить:
-make
-
-и через некоторое время мы получаем бинарник aleesa-misc-go. Это и есть наше приложение.
-
-
-Как это запустить?
------------------------------------------------------------------------------------------------------------------------
-Приложение тестировалось на alpine linux x86_64 3.16, но должно работать на любом (более свежем) linux-е.
-
-После создания data/config.json из data/config_sample.json, можно запускать приложение.
-
-Предполагается, что конфиг написан в формате human json (https://hjson.github.io), который допускает коментарии и
-некоторые другие вольности в форматировании json-а. Конфиг ищется последовательно по следующим путям по принципу "кто
-первый того и тапки":
-~/.aleesa-misc-go.json
-~/aleesa-misc-go.json
-/etc/aleesa-misc-go.json
-data/config.json
-
-В каталоге contrib находится скрипт для alpine linux, системы инициализации openrc. Этот скрипт достаточно положить в
-/etc/init.d/aleesa-misc-go. После чего скопировать бинарник в каталог /var/lib/aleesa-misc-go, положить конфиг в одну
-из дефолтных локаций (тестировалась /var/lib/aleesa-misc-go/data/config.json) и после этого сервис запускается
-командой:
-service aleesa-misc-go start
-
-В автозагрузку его можно прописать через команду:
-rc-update add aleesa-misc-go default
-
-
-Nota Bene
------------------------------------------------------------------------------------------------------------------------
-По механике, в процессе работы мы форкаем горутинки на каждое входящее сообщение, особо не контроллируя этот процесс.
-Предполагается, что на этот роутер не будет большой нагрузки, даже если будет несколько ботов на входе - ограничения
-телеграма и других мессенджеров не должны дать возможности развить достаточно большой message rate, чтобы об это
-споткнуться.
-
-Формально, более удачным было бы иметь автоматический пул воркеров-горутинок и раскидывать им через channel-ы
-сообщения. Внутри каждой горутинки можно было бы повиcнуть в бесконечном цикле на канале входящих сообщений и так и
-работать. Но на практике оно того не стОит.
-
-
-Nota Bene #2
------------------------------------------------------------------------------------------------------------------------
-Go не поддерживает системный вызов fork() из-за чего демонизация программ на гошке средствами самой гошки - это в
-некотором роде проблема. Решается она с помощью утилиты daemonize (https://github.com/bmc/daemonize).
-
-Соответствено, если для запуска этой программы предполагается использовать возможности демонизации, то можно
-воспользоваться этой программой.
-
-В alpine linux есть средства openrc для супервайзинга foreground-сервисов.

README.md

@@ -0,0 +1,73 @@
+# aleesa-misc-go
+
+Основной роутер команд для aleesa-bot. Все протокольные плагины шлют команды сюда, а отсюда команды разлетаются в
+модули-исполнители и ответ от исполнителей идёт обратно заказчику.
+
+Работает по протоколу Redis pubsub.
+
+## Механика работы
+
+Роутер подписан на канал misc (тот, который указан в поле channel конфига).
+
+Модули, реализующие "клиентские протоколы" - telegram, irc, jabber и проч, подписаны на канал своего протокола.
+Входящие сообщения они получают только через этот канал.
+
+Модули, реализующие иную функциональность также подписаны каждый на свой канал. Роутер распознаёт команду и направляет
+её в канал соответствующего бэкэнд-сервиса, который уже дальше работает в соответствии со своей бизнес-логикой.
+
+## Как это собрать?
+
+Понадобится компилятор go версии 1.22 или более новый.
+
+Сам процесс сборки простой, достаточно запустить:
+
+```bash
+make
+```
+
+и через некоторое время мы получаем бинарник **aleesa-misc-go**. Это и есть наше приложение.
+
+## Как это запустить?
+
+Приложение тестировалось на Alpine linux x86_64 3.16, но должно работать на любом (более свежем) linux-е.
+
+После создания **data/config.json** из **data/config_sample.json**, можно запускать приложение.
+
+Предполагается, что конфиг написан в формате [human json](https://hjson.github.io), который допускает коментарии и
+некоторые другие вольности в форматировании json-а. Конфиг ищется последовательно по следующим путям по принципу "кто
+первый того и тапки":
+
+```
+~/.aleesa-misc-go.json
+~/aleesa-misc-go.json
+/etc/aleesa-misc-go.json
+data/config.json
+```
+
+В каталоге contrib находится скрипт для alpine linux, системы инициализации openrc. Этот скрипт достаточно положить в
+**/etc/init.d/aleesa-misc-go**. После чего скопировать бинарник в каталог **/var/lib/aleesa-misc-go**, положить конфиг в
+одну из дефолтных локаций (тестировалась **/var/lib/aleesa-misc-go/data/config.json**) и после этого сервис запускается
+командой:
+
+```bash
+service aleesa-misc-go start
+```
+
+В автозагрузку его можно прописать через команду:
+
+```bash
+rc-update add aleesa-misc-go default
+```
+
+## Nota Bene #1
+
+Go не поддерживает системный вызов fork() из-за чего демонизация программ на гошке средствами самой гошки - это в
+некотором роде проблема. Решается она с помощью утилиты [daemonize](https://github.com/bmc/daemonize).
+
+Соответствено, если для запуска этой программы предполагается использовать возможности демонизации, то можно
+воспользоваться этой программой.
+
+В alpine linux есть средства openrc для супервайзинга foreground-сервисов.
+
+Технически, можно было бы решить эту проблему fork()-а с помощью "github.com/sevlyar/go-daemon", но на текущий момент
+она не стоит остро, поэтому решения не требуется.

TODO

@@ -0,0 +1,7 @@
+Добавить в протокол секцию nsfw/censor.
+
+В качестве валидатора использовать какую-нить готовую либу
+https://gookit.github.io/validate/#/
+github.com/go-playground/validator/v10
+
+https://awesome-go.com/validation/

aleesa-misc-lib.go

@@ -1,225 +1,18 @@
 package main
 
 import (
-	"context"
 	"encoding/json"
 	"fmt"
-	"io/ioutil"
 	"os"
 	"path/filepath"
-	"strings"
 	"syscall"
 
 	"github.com/hjson/hjson-go"
 	log "github.com/sirupsen/logrus"
 )
 
-// Горутинка, которая парсит json-чики прилетевшие из REDIS-ки
-func msgParser(ctx context.Context, msg string) {
-	var sendTo = "craniac"
-	var j rMsg
-
-	log.Debugf("Incomming raw json: %s", msg)
-
-	if err := json.Unmarshal([]byte(msg), &j); err != nil {
-		log.Warnf("Unable to to parse message from redis channel: %s", err)
-		return
-	}
-
-	// Validate our j
-	if exist := j.From; exist == "" {
-		log.Warnf("Incorrect msg from redis, no from field: %s", msg)
-		return
-	}
-
-	if exist := j.Chatid; exist == "" {
-		log.Warnf("Incorrect msg from redis, no chatid field: %s", msg)
-		return
-	}
-
-	if exist := j.Userid; exist == "" {
-		log.Warnf("Incorrect msg from redis, no userid field: %s", msg)
-		return
-	}
-
-	if exist := j.Message; exist == "" {
-		log.Warnf("Incorrect msg from redis, no message field: %s", msg)
-		return
-	}
-
-	if exist := j.Plugin; exist == "" {
-		log.Warnf("Incorrect msg from redis, no plugin field: %s", msg)
-		return
-	}
-
-	if exist := j.Mode; exist == "" {
-		log.Warnf("Incorrect msg from redis, no mode field: %s", msg)
-		return
-	}
-
-	// j.Misc.Answer может и не быть, тогда ответа на такое сообщение не будет
-	// j.Misc.Botnick тоже можно не передавать, тогда будет записана пустая строка
-	// j.Misc.Csign если нам его не передали, возьмём значение из конфига
-	if exist := j.Misc.Csign; exist == "" {
-		j.Misc.Csign = config.Csign
-	}
-
-	// j.Misc.Fwdcnt если нам его не передали, то будет 0
-	if exist := j.Misc.Fwdcnt; exist == 0 {
-		j.Misc.Fwdcnt = 1
-	}
-
-	// j.Misc.GoodMorning может быть быть 1 или 0, по-умолчанию 0
-	// j.Misc.Msgformat может быть быть 1 или 0, по-умолчанию 0
-	// j.Misc.Username можно не передавать, тогда будет пустая строка
-
-	// Отвалидировались, теперь вернёмся к нашим баранам.
-
-	// Если у нас циклическая пересылка сообщения, попробуем её тут разорвать, отбросив сообщение
-	if j.Misc.Fwdcnt > config.ForwardsMax {
-		log.Warnf("Discarding msg with fwd_cnt exceeding max value: %s", msg)
-		return
-	} else {
-		j.Misc.Fwdcnt++
-	}
-
-	// Классифицирем входящие сообщения. Первым делом, попробуем определить команды
-	if j.Message[0:len(j.Misc.Csign)] == j.Misc.Csign {
-		// Может быть, это команда модуля phrases?
-		var done = false
-		var cmd = j.Message[len(j.Misc.Csign):]
-		cmds := []string{"friday", "пятница", "proverb", "пословица", "fortune", "фортунка", "f", "ф", "karma", "карма",
-			"rum", "ром", "vodka", "водка", "beer", "пиво", "tequila", "текила", "whisky", "виски", "absinthe",
-			"абсент"}
-
-		for _, command := range cmds {
-			if cmd == command {
-				sendTo = "phrases"
-
-				// Костыль для кармы
-				if cmd == "karma" || cmd == "карма" {
-					j.Misc.Answer = 1
-				}
-
-				done = true
-				break
-			}
-		}
-
-		// Не угадали? акей, как насчёт модуля webapp?
-		if !done {
-			cmds = []string{"buni", "anek", "анек", "анекдот", "cat", "кис", "drink", "праздник", "fox", "лис", "frog",
-				"лягушка", "horse", "лошадь", "лошадка", "monkeyuser", "rabbit", "bunny", "кролик", "snail", "улитка",
-				"owl", "сова", "сыч", "xkcd", "tits", "boobs", "tities", "boobies", "сиси", "сисечки", "butt", "booty",
-				"ass", "попа", "попка"}
-
-			for _, command := range cmds {
-				if cmd == command {
-					sendTo = "webapp"
-					done = true
-					break
-				}
-			}
-		}
-
-		// Не фортануло? может, повезёт с модулем games?
-		if !done {
-			cmds = []string{"dig", "копать", "fish", "fishing", "рыба", "рыбка", "рыбалка"}
-
-			for _, command := range cmds {
-				if cmd == command {
-					sendTo = "games"
-					done = true
-					break
-				}
-			}
-		}
-
-		// Нет? Вдруг это комплексная команда модуля webapp?
-		if !done {
-			cmdLen := len(cmd)
-
-			cmds := []string{"w ", "п ", "погода ", "погодка ", "погадка ", "weather "}
-
-			for _, command := range cmds {
-				if cmdLen > len(command) && cmd[0:len(command)] == command {
-					sendTo = "webapp"
-					done = true
-					break
-				}
-			}
-		}
-
-		// Опять мимо? Давай тогда попытаем удачу в поиске комплексной команды для phrases
-		if !done {
-			cmdLen := len(cmd)
-
-			cmds := []string{"karma ", "карма ", "rum ", "ром ", "vodka ", "водка ", "beer ", "пиво ", "tequila ",
-				"текила ", "whisky ", "виски ", "absinthe ", "абсент "}
-
-			for _, command := range cmds {
-				if cmdLen > len(command) && cmd[0:len(command)] == command {
-					sendTo = "phrases"
-
-					if command == "karma " || command == "карма " {
-						// Костыль для кармы
-						j.Misc.Answer = 1
-					}
-
-					break
-				}
-			}
-		}
-	} else {
-		// Попробуем выискать изменение кармы
-		msgLen := len(j.Message)
-
-		// ++ или -- на конце фразы - это наш кандидат
-		if msgLen > len("++") {
-			if j.Message[msgLen-len("--"):msgLen] == "--" || j.Message[msgLen-len("++"):msgLen] == "++" {
-				// Предполагается, что менять карму мы будем для одной фразы, то есть для 1 строки
-				if len(strings.Split(j.Message, "\n")) == 1 {
-					sendTo = "phrases"
-
-					// Костыль для кармы
-					j.Misc.Answer = 1
-				}
-			}
-		}
-	}
-
-	// Настало время формировать json и засылать его в дальше
-	var message sMsg
-	message.From = j.From
-	message.Userid = j.Userid
-	message.Chatid = j.Chatid
-	message.Message = j.Message
-	message.Plugin = j.Plugin
-	message.Mode = j.Mode
-	message.Misc.Fwdcnt = j.Misc.Fwdcnt
-	message.Misc.Csign = j.Misc.Csign
-	message.Misc.Username = j.Misc.Username
-	message.Misc.Answer = j.Misc.Answer
-	message.Misc.Botnick = j.Misc.Botnick
-	message.Misc.Msgformat = j.Misc.Msgformat
-	message.Misc.GoodMorning = j.Misc.GoodMorning
-
-	data, err := json.Marshal(message)
-
-	if err != nil {
-		log.Warnf("Unable to to serialize message for redis: %s", err)
-		return
-	}
-
-	// Заталкиваем наш json в редиску
-	if err := redisClient.Publish(ctx, sendTo, data).Err(); err != nil {
-		log.Warnf("Unable to send data to redis channel %s: %s", sendTo, err)
-	} else {
-		log.Debugf("Send msg to redis channel %s: %s", sendTo, string(data))
-	}
-}
-
-// Читает и валидирует конфиг, а также выставляет некоторые default-ы, если значений для параметров в конфиге нет
+// readConfig читает и валидирует конфиг, а также выставляет некоторые default-ы, если значений для параметров в конфиге
+// нет.
 func readConfig() {
 	configLoaded := false
 	executablePath, err := os.Executable()
@@ -248,27 +41,33 @@ func readConfig() {
 		// Конфиг-файл длинноват для конфига, попробуем следующего кандидата
 		if fileInfo.Size() > 65535 {
 			log.Warnf("Config file %s is too long for config, skipping", location)
+
 			continue
 		}
 
-		buf, err := ioutil.ReadFile(location)
+		buf, err := os.ReadFile(location)
 
 		// Не удалось прочитать, попробуем следующего кандидата
 		if err != nil {
 			log.Warnf("Skip reading config file %s: %s", location, err)
+
 			continue
 		}
 
 		// Исходя из документации, hjson какбы умеет парсить "кривой" json, но парсит его в map-ку.
 		// Интереснее на выходе получить структурку: то есть мы вначале конфиг преобразуем в map-ку, затем эту map-ку
 		// сериализуем в json, а потом json преврщааем в стркутурку. Не очень эффективно, но он и не часто требуется.
-		var sampleConfig myConfig
-		var tmp map[string]interface{}
+		var (
+			sampleConfig myConfig
+			tmp          map[string]interface{}
+		)
+
 		err = hjson.Unmarshal(buf, &tmp)
 
 		// Не удалось распарсить - попробуем следующего кандидата
 		if err != nil {
 			log.Warnf("Skip parsing config file %s: %s", location, err)
+
 			continue
 		}
 
@@ -277,11 +76,13 @@ func readConfig() {
 		// Не удалось преобразовать map-ку в json
 		if err != nil {
 			log.Warnf("Skip parsing config file %s: %s", location, err)
+
 			continue
 		}
 
 		if err := json.Unmarshal(tmpjson, &sampleConfig); err != nil {
 			log.Warnf("Skip parsing config file %s: %s", location, err)
+
 			continue
 		}
 
@@ -294,6 +95,10 @@ func readConfig() {
 			sampleConfig.Port = 6379
 		}
 
+		if sampleConfig.Timeout == 0 {
+			sampleConfig.Timeout = 10
+		}
+
 		if sampleConfig.Loglevel == "" {
 			sampleConfig.Loglevel = "info"
 		}
@@ -317,6 +122,10 @@ func readConfig() {
 			sampleConfig.ForwardChannels.Webapp = "webapp"
 		}
 
+		if sampleConfig.ForwardChannels.WebappGo == "" {
+			sampleConfig.ForwardChannels.WebappGo = "webapp-go"
+		}
+
 		if sampleConfig.ForwardChannels.Craniac == "" {
 			sampleConfig.ForwardChannels.Craniac = "craniac"
 		}
@@ -331,19 +140,24 @@ func readConfig() {
 
 		config = sampleConfig
 		configLoaded = true
+
 		log.Infof("Using %s as config file", location)
+
 		break
 	}
 
 	if !configLoaded {
 		log.Error("Config was not loaded! Refusing to start.")
+		os.Exit(1)
 	}
 }
 
-// Хэндлер сигналов закрывает все бд и сваливает из приложения
+// sigHandler хэндлер сигналов закрывает все бд и сваливает из приложения.
 func sigHandler() {
 	var err error
 
+	log.Infoln("Install signal handler")
+
 	for {
 		var s = <-sigChan
 		switch s {
@@ -354,15 +168,15 @@ func sigHandler() {
 		case syscall.SIGQUIT:
 			log.Infoln("Got SIGQUIT, quitting")
 
-		// Заходим на новую итерацию, если у нас "неинтересный" сигнал
+		// Заходим на новую итерацию, если у нас "неинтересный" сигнал.
 		default:
 			continue
 		}
 
-		// Чтобы не срать в логи ошибками от редиски, проставим shutdown state приложения в true
+		// Чтобы не срать в логи ошибками от редиски, проставим shutdown state приложения в true.
 		shutdown = true
 
-		// Отпишемся от всех каналов и закроем коннект к редиске
+		// Отпишемся от всех каналов и закроем коннект к редиске.
 		if err = subscriber.Unsubscribe(ctx); err != nil {
 			log.Errorf("Unable to unsubscribe from redis channels cleanly: %s", err)
 		}

data/config_sample.json

@@ -5,6 +5,9 @@
     # 6379 if not set
     "port" : 6379,
 
+    # Redis timeout, 10 seconds if not set
+    "timeout" : 10,
+
     # info if not set
     "loglevel" : "info",
 
@@ -25,6 +28,9 @@
        # webapp if not set
        "webapp" : "webapp",
 
+       # webapp-go if not set
+        "webapp-go" : "webapp-go",
+
        # craniac if not set
        "craniac" : "craniac"
     },

globals.go

@@ -7,23 +7,23 @@ import (
 	"github.com/go-redis/redis/v8"
 )
 
-// Config - это у нас глобальная штука :)
+// Config - это у нас глобальная штука.
 var config myConfig
 
-// To break circular message forwarding we must set some sane default, it can be overridden via config
+// To break circular message forwarding we must set some sane default, it can be overridden via config.
 var forwardMax int64 = 5
 
-// Объектики клиента-редиски
+// Объектики клиента-редиски.
 var redisClient *redis.Client
 var subscriber *redis.PubSub
 
-// Main context
+// Main context.
 var ctx = context.Background()
 
-// Ставится в true, если мы получили сигнал на выключение
+// Ставится в true, если мы получили сигнал на выключение.
 var shutdown = false
 
-// Канал, в который приходят уведомления для хэндлера сигналов от траппера сигналов
+// Канал, в который приходят уведомления для хэндлера сигналов от траппера сигналов.
 var sigChan = make(chan os.Signal, 1)
 
 /* vim: set ft=go noet ai ts=4 sw=4 sts=4: */

go.mod

@@ -1,20 +1,16 @@
 module aleesa-misc-go
 
-go 1.18
+go 1.22
 
 require (
-	github.com/go-redis/redis/v8 v8.11.4
-	github.com/sirupsen/logrus v1.8.1
+	github.com/go-redis/redis/v8 v8.11.5
+	github.com/sirupsen/logrus v1.9.3
 )
 
 require (
-	github.com/cespare/xxhash/v2 v2.1.2 // indirect
+	github.com/cespare/xxhash/v2 v2.3.0 // indirect
 	github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f // indirect
-	golang.org/x/sys v0.0.0-20211216021012-1d35b9e2eb4e // indirect
+	golang.org/x/sys v0.25.0 // indirect
 )
 
-require (
-	github.com/hjson/hjson-go v3.1.0+incompatible
-	github.com/onsi/ginkgo v1.16.5 // indirect
-	github.com/onsi/gomega v1.18.1 // indirect
-)
+require github.com/hjson/hjson-go v3.3.0+incompatible

go.sum

@@ -1,117 +1,40 @@
-github.com/cespare/xxhash/v2 v2.1.2 h1:YRXhKfTDauu4ajMg1TPgFO5jnlC2HCbmLXMcTG5cbYE=
-github.com/cespare/xxhash/v2 v2.1.2/go.mod h1:VGX0DQ3Q6kWi7AoAeZDth3/j3BFtOZR5XLFGgcrjCOs=
-github.com/chzyer/logex v1.1.10/go.mod h1:+Ywpsq7O8HXn0nuIou7OrIPyXbp3wmkHB+jjWRnGsAI=
-github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e/go.mod h1:nSuG5e5PlCu98SY8svDHJxuZscDgtXS6KTTbou5AhLI=
-github.com/chzyer/test v0.0.0-20180213035817-a1ea475d72b1/go.mod h1:Q3SI9o4m/ZMnBNeIyt5eFwwo7qiLfzFZmjNmxjkiQlU=
+github.com/cespare/xxhash/v2 v2.3.0 h1:UL815xU9SqsFlibzuggzjXhog7bL6oX9BbNZnL2UFvs=
+github.com/cespare/xxhash/v2 v2.3.0/go.mod h1:VGX0DQ3Q6kWi7AoAeZDth3/j3BFtOZR5XLFGgcrjCOs=
 github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f h1:lO4WD4F/rVNCu3HqELle0jiPLLBs70cWOduZpkS1E78=
 github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f/go.mod h1:cuUVRXasLTGF7a8hSLbxyZXjz+1KgoB3wDUb6vlszIc=
-github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo=
 github.com/fsnotify/fsnotify v1.4.9 h1:hsms1Qyu0jgnwNXIxa+/V/PDsU6CfLf6CNO8H7IWoS4=
 github.com/fsnotify/fsnotify v1.4.9/go.mod h1:znqG4EE+3YCdAaPaxE2ZRY/06pZUdp0tY4IgpuI1SZQ=
-github.com/go-redis/redis/v8 v8.11.4 h1:kHoYkfZP6+pe04aFTnhDH6GDROa5yJdHJVNxV3F46Tg=
-github.com/go-redis/redis/v8 v8.11.4/go.mod h1:2Z2wHZXdQpCDXEGzqMockDpNyYvi2l4Pxt6RJr792+w=
-github.com/go-task/slim-sprig v0.0.0-20210107165309-348f09dbbbc0/go.mod h1:fyg7847qk6SyHyPtNmDHnmrv/HOrqktSC+C9fM+CJOE=
-github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
-github.com/golang/protobuf v1.4.0-rc.1/go.mod h1:ceaxUfeHdC40wWswd/P6IGgMaK3YpKi5j83Wpe3EHw8=
-github.com/golang/protobuf v1.4.0-rc.1.0.20200221234624-67d41d38c208/go.mod h1:xKAWHe0F5eneWXFV3EuXVDTCmh+JuBKY0li0aMyXATA=
-github.com/golang/protobuf v1.4.0-rc.2/go.mod h1:LlEzMj4AhA7rCAGe4KMBDvJI+AwstrUpVNzEA03Pprs=
-github.com/golang/protobuf v1.4.0-rc.4.0.20200313231945-b860323f09d0/go.mod h1:WU3c8KckQ9AFe+yFwt9sWVRKCVIyN9cPHBJSNnbL67w=
-github.com/golang/protobuf v1.4.0/go.mod h1:jodUvKwWbYaEsadDk5Fwe5c77LiNKVO9IDvqG2KuDX0=
-github.com/golang/protobuf v1.4.2/go.mod h1:oDoupMAO8OvCJWAcko0GGGIgR6R6ocIYbsSw735rRwI=
-github.com/golang/protobuf v1.5.0/go.mod h1:FsONVRAS9T7sI+LIUmWTfcYkHO4aIWwzhcaSAoJOfIk=
-github.com/golang/protobuf v1.5.2/go.mod h1:XVQd3VNwM+JqD3oG2Ue2ip4fOMUkwXdXDdiuN0vRsmY=
-github.com/google/go-cmp v0.3.0/go.mod h1:8QqcDgzrUqlUb/G2PQTWiueGozuR1884gddMywk6iLU=
-github.com/google/go-cmp v0.3.1/go.mod h1:8QqcDgzrUqlUb/G2PQTWiueGozuR1884gddMywk6iLU=
-github.com/google/go-cmp v0.4.0/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
-github.com/google/go-cmp v0.5.5/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
-github.com/google/go-cmp v0.5.6/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
-github.com/google/pprof v0.0.0-20210407192527-94a9f03dee38/go.mod h1:kpwsk12EmLew5upagYY7GY0pfYCcupk39gWOCRROcvE=
-github.com/hjson/hjson-go v3.1.0+incompatible h1:DY/9yE8ey8Zv22bY+mHV1uk2yRy0h8tKhZ77hEdi0Aw=
-github.com/hjson/hjson-go v3.1.0+incompatible/go.mod h1:qsetwF8NlsTsOTwZTApNlTCerV+b2GjYRRcIk4JMFio=
-github.com/hpcloud/tail v1.0.0/go.mod h1:ab1qPbhIpdTxEkNHXyeSf5vhxWSCs/tWer42PpOxQnU=
-github.com/ianlancetaylor/demangle v0.0.0-20200824232613-28f6c0f3b639/go.mod h1:aSSvb/t6k1mPoxDqO4vJh6VOCGPwU4O0C2/Eqndh1Sc=
-github.com/nxadm/tail v1.4.4/go.mod h1:kenIhsEOeOJmVchQTgglprH7qJGnHDVpk1VPCcaMI8A=
+github.com/go-redis/redis/v8 v8.11.5 h1:AcZZR7igkdvfVmQTPnu9WE37LRrO/YrBH5zWyjDC0oI=
+github.com/go-redis/redis/v8 v8.11.5/go.mod h1:gREzHqY1hg6oD9ngVRbLStwAWKhA0FEgq8Jd4h5lpwo=
+github.com/hjson/hjson-go v3.3.0+incompatible h1:Rqr+Ya+0aCJMjaE4s8E9YKvuJLuLVpEvz4ONum52vnI=
+github.com/hjson/hjson-go v3.3.0+incompatible/go.mod h1:qsetwF8NlsTsOTwZTApNlTCerV+b2GjYRRcIk4JMFio=
 github.com/nxadm/tail v1.4.8 h1:nPr65rt6Y5JFSKQO7qToXr7pePgD6Gwiw05lkbyAQTE=
 github.com/nxadm/tail v1.4.8/go.mod h1:+ncqLTQzXmGhMZNUePPaPqPvBxHAIsmXswZKocGu+AU=
-github.com/onsi/ginkgo v1.6.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
-github.com/onsi/ginkgo v1.12.1/go.mod h1:zj2OWP4+oCPe1qIXoGWkgMRwljMUYCdkwsT2108oapk=
-github.com/onsi/ginkgo v1.16.4/go.mod h1:dX+/inL/fNMqNlz0e9LfyB9TswhZpCVdJM/Z6Vvnwo0=
 github.com/onsi/ginkgo v1.16.5 h1:8xi0RTUf59SOSfEtZMvwTvXYMzG4gV23XVHOZiXNtnE=
 github.com/onsi/ginkgo v1.16.5/go.mod h1:+E8gABHa3K6zRBolWtd+ROzc/U5bkGt0FwiG042wbpU=
-github.com/onsi/ginkgo/v2 v2.0.0/go.mod h1:vw5CSIxN1JObi/U8gcbwft7ZxR2dgaR70JSE3/PpL4c=
-github.com/onsi/gomega v1.7.1/go.mod h1:XdKZgCCFLUoM/7CFJVPcG8C1xQ1AJ0vpAezJrB7JYyY=
-github.com/onsi/gomega v1.10.1/go.mod h1:iN09h71vgCQne3DLsj+A5owkum+a2tYe+TOCB1ybHNo=
-github.com/onsi/gomega v1.16.0/go.mod h1:HnhC7FXeEQY45zxNK3PPoIUhzk/80Xly9PcubAlGdZY=
-github.com/onsi/gomega v1.17.0/go.mod h1:HnhC7FXeEQY45zxNK3PPoIUhzk/80Xly9PcubAlGdZY=
 github.com/onsi/gomega v1.18.1 h1:M1GfJqGRrBrrGGsbxzV5dqM2U2ApXefZCQpkukxYRLE=
 github.com/onsi/gomega v1.18.1/go.mod h1:0q+aL8jAiMXy9hbwj2mr5GziHiwhAIQpFmmtT5hitRs=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
-github.com/sirupsen/logrus v1.8.1 h1:dJKuHgqk1NNQlqoA6BTlM1Wf9DOH3NBjQyu0h9+AZZE=
-github.com/sirupsen/logrus v1.8.1/go.mod h1:yWOB1SBYBC5VeMP7gHvWumXLIWorT60ONWic61uBYv0=
+github.com/sirupsen/logrus v1.9.3 h1:dueUQJ1C2q9oE3F7wvmSGAaVtTmUizReu6fjN8uqzbQ=
+github.com/sirupsen/logrus v1.9.3/go.mod h1:naHLuLoDiP4jHNo9R0sCBMtWGeIprob74mVsIT4qYEQ=
 github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
-github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
-github.com/stretchr/testify v1.5.1 h1:nOGnQDM7FYENwehXlg/kFVnos3rEvtKTjRvOWSzb6H4=
-github.com/stretchr/testify v1.5.1/go.mod h1:5W2xD1RspED5o8YsWQXVCued0rvSQ+mT+I5cxcmMvtA=
-github.com/yuin/goldmark v1.2.1/go.mod h1:3hX8gzYuyVAZsxl0MRgGTJEmQBFcNTphYh9decYSb74=
-golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
-golang.org/x/crypto v0.0.0-20191011191535-87dc89f01550/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI=
-golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
-golang.org/x/net v0.0.0-20180906233101-161cd47e91fd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
-golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
-golang.org/x/net v0.0.0-20190620200207-3b0461eec859/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
-golang.org/x/net v0.0.0-20200520004742-59133d7f0dd7/go.mod h1:qpuaurCH72eLCgpAm/N6yyVIVM9cpaDIP3A8BGJEC5A=
-golang.org/x/net v0.0.0-20201021035429-f5854403a974/go.mod h1:sp8m0HH+o8qH0wwXwYZr8TS3Oi6o0r6Gce1SSxlDquU=
+github.com/stretchr/testify v1.7.0 h1:nwc3DEeHmmLAfoZucVR881uASk0Mfjw8xYJ99tb5CcY=
+github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 golang.org/x/net v0.0.0-20210428140749-89ef3d95e781 h1:DzZ89McO9/gWPsQXS/FVKAlG02ZjaQ6AlZRBimEYOd0=
 golang.org/x/net v0.0.0-20210428140749-89ef3d95e781/go.mod h1:OJAsFXCWl8Ukc7SiCT/9KSuxbyM7479/AVlXFRxuMCk=
-golang.org/x/sync v0.0.0-20180314180146-1d60e4601c6f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sys v0.0.0-20180909124046-d0be0721c37e/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20190904154756-749cb33beabd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20191005200804-aed5e4c7ecf9/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20191026070338-33540a1f6037/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20191120155948-bd437916bb0e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20191204072324-ce4227a45e2e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200323222414-85ca7c5b95cd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200930185726-fdedc70b468f/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20210112080510-489259a85091/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20210423082822-04245dca01da/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20211216021012-1d35b9e2eb4e h1:fLOSk5Q00efkSvAm+4xcoXD+RRmLmmulPn5I3Y9F2EM=
-golang.org/x/sys v0.0.0-20211216021012-1d35b9e2eb4e/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
-golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
-golang.org/x/text v0.3.3/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
+golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.25.0 h1:r+8e+loiHxRqhXVl6ML1nO3l1+oFoWbnlu2Ehimmi34=
+golang.org/x/sys v0.25.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 golang.org/x/text v0.3.6 h1:aRYxNxv6iGQlyVaZmk6ZgYEDa+Jg18DxebPSrd6bg1M=
 golang.org/x/text v0.3.6/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
-golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
-golang.org/x/tools v0.0.0-20191119224855-298f0cb1881e/go.mod h1:b+2E5dAYhXwXZwtnZ6UAqBI28+e2cm9otk0dWdXHAEo=
-golang.org/x/tools v0.0.0-20201224043029-2b0845dc783e/go.mod h1:emZCQorbCU4vsT4fOWvOPXz4eW1wZW4PmDk9uLelYpA=
-golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-golang.org/x/xerrors v0.0.0-20191011141410-1b5146add898/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
-google.golang.org/protobuf v0.0.0-20200109180630-ec00e32a8dfd/go.mod h1:DFci5gLYBciE7Vtevhsrf46CRTquxDuWsQurQQe4oz8=
-google.golang.org/protobuf v0.0.0-20200221191635-4d8936d0db64/go.mod h1:kwYJMbMJ01Woi6D6+Kah6886xMZcty6N08ah7+eCXa0=
-google.golang.org/protobuf v0.0.0-20200228230310-ab0ca4ff8a60/go.mod h1:cfTl7dwQJ+fmap5saPgwCLgHXTUD7jkjRqWcaiX5VyM=
-google.golang.org/protobuf v1.20.1-0.20200309200217-e05f789c0967/go.mod h1:A+miEFZTKqfCUM6K7xSMQL9OKL/b6hQv+e19PK+JZNE=
-google.golang.org/protobuf v1.21.0/go.mod h1:47Nbq4nVaFHyn7ilMalzfO3qCViNmqZ2kzikPIcrTAo=
-google.golang.org/protobuf v1.23.0/go.mod h1:EGpADcykh3NcUnDUJcl1+ZksZNG86OlYog2l/sGQquU=
-google.golang.org/protobuf v1.26.0-rc.1/go.mod h1:jlhhOSvTdKEhbULTjvd4ARK9grFBp09yW+WbY/TyQbw=
-google.golang.org/protobuf v1.26.0/go.mod h1:9q0QmTI4eRPtz6boOQmLYwt+qCgq0jsYwAQnmE0givc=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
-gopkg.in/fsnotify.v1 v1.4.7/go.mod h1:Tz8NjZHkW78fSQdbUxIjBTcgA1z1m8ZHf0WmKUhAMys=
 gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7 h1:uRGJdciOHaEIrze2W8Q3AKkepLTh2hOroT7a+7czfdQ=
 gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7/go.mod h1:dt/ZhP58zS4L8KSrWDmTeBkI65Dw0HsyUHuEVlX15mw=
-gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
-gopkg.in/yaml.v2 v2.2.4/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
-gopkg.in/yaml.v2 v2.3.0/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
 gopkg.in/yaml.v2 v2.4.0 h1:D8xgwECY7CYvx+Y2n4sBz93Jn9JRvxdiyyo8CTfuKaY=
 gopkg.in/yaml.v2 v2.4.0/go.mod h1:RDklbk79AGWmwhnvt/jBztapEOGDOx6ZbXqjP6csGnQ=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c h1:dUUwHk2QECo/6vqA44rthZ8ie2QXMNeKRTHCNY2nXvo=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

main.go

@@ -1,7 +1,6 @@
 package main
 
 import (
-	"context"
 	"fmt"
 	"os"
 	"os/signal"
@@ -12,7 +11,7 @@ import (
 	log "github.com/sirupsen/logrus"
 )
 
-// Производит некоторую инициализацию перед запуском main()
+// init производит некоторую инициализацию перед запуском main().
 func init() {
 	log.SetFormatter(&log.TextFormatter{
 		DisableQuote:           true,
@@ -24,7 +23,7 @@ func init() {
 
 	readConfig()
 
-	// no panic, no trace
+	// no panic, no trace.
 	switch config.Loglevel {
 	case "fatal":
 		log.SetLevel(log.FatalLevel)
@@ -39,14 +38,19 @@ func init() {
 	default:
 		log.SetLevel(log.InfoLevel)
 	}
+
+	// Иницализируем клиента Редиски.
+	redisClient = redis.NewClient(&redis.Options{
+		Addr: fmt.Sprintf("%s:%d", config.Server, config.Port),
+	}).WithContext(ctx).WithTimeout(time.Duration(config.Timeout) * time.Second)
+
+	// Обозначим, что хотим после соединения подписаться на события из канала config.Channel.
+	subscriber = redisClient.Subscribe(ctx, config.Channel)
 }
 
-// Основная функция программы, не добавить и не убавить
+// main основная функция программы, не добавить и не убавить.
 func main() {
-	// Main context
-	var ctx = context.Background()
-
-	// Откроем лог и скормим его логгеру
+	// Откроем лог и скормим его логгеру.
 	if config.Log != "" {
 		logfile, err := os.OpenFile(config.Log, os.O_WRONLY|os.O_APPEND|os.O_CREATE, 0644)
 
@@ -57,15 +61,7 @@ func main() {
 		log.SetOutput(logfile)
 	}
 
-	// Иницализируем клиента
-	redisClient = redis.NewClient(&redis.Options{
-		Addr: fmt.Sprintf("%s:%d", config.Server, config.Port),
-	})
-
-	log.Debugf("Lazy connect() to redis at %s:%d", config.Server, config.Port)
-	subscriber = redisClient.Subscribe(ctx, config.Channel)
-
-	// Самое время поставить траппер сигналов
+	// Самое время поставить траппер сигналов.
 	signal.Notify(sigChan,
 		syscall.SIGINT,
 		syscall.SIGTERM,
@@ -73,25 +69,15 @@ func main() {
 
 	go sigHandler()
 
-	// Обработчик событий от редиски
-	for {
-		if shutdown {
-			time.Sleep(1 * time.Second)
-			continue
+	// Начнём выгребать события из редиски (длина конвеера/буфера канала по-умолчанию - 100 сообщений).
+	ch := subscriber.Channel()
+
+	log.Infoln("Aleesa-misc-go started")
+
+	for msg := range ch {
+		if !shutdown {
+			msgParser(ctx, msg.Payload)
 		}
-
-		msg, err := subscriber.ReceiveMessage(ctx)
-
-		if err != nil {
-			if !shutdown {
-				log.Warnf("Unable to connect to redis at %s:%d: %s", config.Server, config.Port, err)
-			}
-
-			time.Sleep(1 * time.Second)
-			continue
-		}
-
-		go msgParser(ctx, msg.Payload)
 	}
 }
 

msg-parsers.go

@@ -0,0 +1,236 @@
+package main
+
+import (
+	"context"
+	"encoding/json"
+	"strings"
+
+	log "github.com/sirupsen/logrus"
+)
+
+// msgParser горутинка, которая парсит json-чики прилетевшие из REDIS-ки.
+func msgParser(ctx context.Context, msg string) {
+	var (
+		sendTo = "craniac"
+		j      rMsg
+	)
+
+	log.Debugf("Incomming raw json: %s", msg)
+
+	if err := json.Unmarshal([]byte(msg), &j); err != nil {
+		log.Warnf("Unable to to parse message from redis channel: %s", err)
+
+		return
+	}
+
+	// Validate our j.
+	if exist := j.From; exist == "" {
+		log.Warnf("Incorrect msg from redis, no from field: %s", msg)
+
+		return
+	}
+
+	if exist := j.Chatid; exist == "" {
+		log.Warnf("Incorrect msg from redis, no chatid field: %s", msg)
+
+		return
+	}
+
+	if exist := j.Userid; exist == "" {
+		log.Warnf("Incorrect msg from redis, no userid field: %s", msg)
+
+		return
+	}
+
+	// j.Threadid может быть пустым, значит либо нам его не дали, либо дали пустым. Это нормально.
+
+	if exist := j.Message; exist == "" {
+		log.Warnf("Incorrect msg from redis, no message field: %s", msg)
+
+		return
+	}
+
+	if exist := j.Plugin; exist == "" {
+		log.Warnf("Incorrect msg from redis, no plugin field: %s", msg)
+
+		return
+	}
+
+	if exist := j.Mode; exist == "" {
+		log.Warnf("Incorrect msg from redis, no mode field: %s", msg)
+
+		return
+	}
+
+	// j.Misc.Answer может и не быть, тогда ответа на такое сообщение не будет.
+	// j.Misc.Botnick тоже можно не передавать, тогда будет записана пустая строка.
+	// j.Misc.Csign если нам его не передали, возьмём значение из конфига.
+	if exist := j.Misc.Csign; exist == "" {
+		j.Misc.Csign = config.Csign
+	}
+
+	// j.Misc.Fwdcnt если нам его не передали, то будет 0.
+	if exist := j.Misc.Fwdcnt; exist == 0 {
+		j.Misc.Fwdcnt = 1
+	}
+
+	// j.Misc.GoodMorning может быть 1 или 0, по-умолчанию 0.
+	// j.Misc.Msgformat может быть 1 или 0, по-умолчанию 0.
+	// j.Misc.Username можно не передавать, тогда будет пустая строка.
+
+	// Отвалидировались, теперь вернёмся к нашим баранам.
+
+	// Если у нас циклическая пересылка сообщения, попробуем её тут разорвать, отбросив сообщение.
+	if j.Misc.Fwdcnt > config.ForwardsMax {
+		log.Warnf("Discarding msg with fwd_cnt exceeding max value: %s", msg)
+
+		return
+	}
+
+	j.Misc.Fwdcnt++
+
+	// Классифицирем входящие сообщения. Первым делом, попробуем определить команды.
+	if j.Message[0:len(j.Misc.Csign)] == j.Misc.Csign {
+		// Может быть, это команда модуля phrases?
+		var (
+			done = false
+			cmd  = j.Message[len(j.Misc.Csign):]
+		)
+
+		cmds := []string{"friday", "пятница", "proverb", "пословица", "пословиться", "fortune", "фортунка", "f", "ф",
+			"karma", "карма", "rum", "ром", "vodka", "водка", "beer", "пиво", "tequila", "текила", "whisky", "виски",
+			"absinthe", "абсент", "fuck"}
+
+		for _, command := range cmds {
+			if cmd == command {
+				sendTo = config.ForwardChannels.Phrases
+
+				// Костыль для кармы.
+				if cmd == "karma" || cmd == "карма" {
+					j.Misc.Answer = 1
+				}
+
+				done = true
+
+				break
+			}
+		}
+
+		// Не угадали? акей, как насчёт модуля webapp-go?
+		if !done {
+			cmds = []string{"frog", "лягушка", "horse", "лошадь", "лошадка", "rabbit", "bunny", "кролик",
+				"snail", "улитка", "cat", "кис", "fox", "лис", "buni", "anek", "анек", "анекдот",
+				"xkcd", "monkeyuser", "tits", "boobs", "tities", "boobies", "сиси", "сисечки", "butt",
+				"booty", "ass", "попа", "попка", "drink", "праздник", "owl", "сова", "сыч", "w", "п", "погода",
+				"погодка", "погадка"}
+
+			for _, command := range cmds {
+				if cmd == command {
+					sendTo = config.ForwardChannels.WebappGo
+					done = true
+
+					break
+				}
+			}
+		}
+
+		// Не фортануло? может, повезёт с модулем games?
+		if !done {
+			cmds = []string{"dig", "копать", "fish", "fishing", "рыба", "рыбка", "рыбалка"}
+
+			for _, command := range cmds {
+				if cmd == command {
+					sendTo = config.ForwardChannels.Games
+					done = true
+
+					break
+				}
+			}
+		}
+
+		// Нет? Вдруг это комплексная команда модуля webapp?
+		if !done {
+			cmdLen := len(cmd)
+
+			cmds := []string{"w ", "п ", "погода ", "погодка ", "погадка ", "weather "}
+
+			for _, command := range cmds {
+				if cmdLen > len(command) && cmd[0:len(command)] == command {
+					sendTo = config.ForwardChannels.WebappGo
+					done = true
+
+					break
+				}
+			}
+		}
+
+		// Опять мимо? Давай тогда попытаем удачу в поиске комплексной команды для phrases.
+		if !done {
+			cmdLen := len(cmd)
+
+			cmds := []string{"karma ", "карма ", "rum ", "ром ", "vodka ", "водка ", "beer ", "пиво ", "tequila ",
+				"текила ", "whisky ", "виски ", "absinthe ", "абсент "}
+
+			for _, command := range cmds {
+				if cmdLen > len(command) && cmd[0:len(command)] == command {
+					sendTo = config.ForwardChannels.Phrases
+
+					if command == "karma " || command == "карма " {
+						// Костыль для кармы
+						j.Misc.Answer = 1
+					}
+
+					break
+				}
+			}
+		}
+	} else {
+		// Попробуем выискать изменение кармы.
+		msgLen := len(j.Message)
+
+		// ++ или -- на конце фразы - это наш кандидат.
+		if msgLen > len("++") {
+			if j.Message[msgLen-len("--"):msgLen] == "--" || j.Message[msgLen-len("++"):msgLen] == "++" {
+				// Предполагается, что менять карму мы будем для одной фразы, то есть для 1 строки
+				if len(strings.Split(j.Message, "\n")) == 1 {
+					sendTo = config.ForwardChannels.Phrases
+
+					// Костыль для кармы
+					j.Misc.Answer = 1
+				}
+			}
+		}
+	}
+
+	// Настало время формировать json и засылать его в дальше.
+	var message sMsg
+	message.From = j.From
+	message.Userid = j.Userid
+	message.Chatid = j.Chatid
+	message.Threadid = j.Threadid
+	message.Message = j.Message
+	message.Plugin = j.Plugin
+	message.Mode = j.Mode
+	message.Misc.Fwdcnt = j.Misc.Fwdcnt
+	message.Misc.Csign = j.Misc.Csign
+	message.Misc.Username = j.Misc.Username
+	message.Misc.Answer = j.Misc.Answer
+	message.Misc.Botnick = j.Misc.Botnick
+	message.Misc.Msgformat = j.Misc.Msgformat
+	message.Misc.GoodMorning = j.Misc.GoodMorning
+
+	data, err := json.Marshal(message)
+
+	if err != nil {
+		log.Warnf("Unable to to serialize message for redis: %s", err)
+
+		return
+	}
+
+	// Заталкиваем наш json в редиску.
+	if err := redisClient.Publish(ctx, sendTo, data).Err(); err != nil {
+		log.Warnf("Unable to send data to redis channel %s: %s", sendTo, err)
+	} else {
+		log.Debugf("Send msg to redis channel %s: %s", sendTo, string(data))
+	}
+}

types.go

@@ -1,31 +1,34 @@
 package main
 
-// Конфиг
+// myConfig структура, описывающая формат Конфига приложения.
 type myConfig struct {
 	Server          string `json:"server,omitempty"`
 	Port            int    `json:"port,omitempty"`
+	Timeout         int    `json:"timeout,omitempty"`
 	Loglevel        string `json:"loglevel,omitempty"`
 	Log             string `json:"log,omitempty"`
 	Channel         string `json:"channel,omitempty"`
 	ForwardChannels struct {
-		Games   string `json:"games,omitempty"`
-		Phrases string `json:"phrases,omitempty"`
-		Webapp  string `json:"webapp,omitempty"`
-		Craniac string `json:"craniac,omitempty"`
+		Games    string `json:"games,omitempty"`
+		Phrases  string `json:"phrases,omitempty"`
+		Webapp   string `json:"webapp,omitempty"`
+		WebappGo string `json:"webapp-go,omitempty"`
+		Craniac  string `json:"craniac,omitempty"`
 	} `json:"forward_channels"`
 	Csign       string `json:"csign,omitempty"`
 	ForwardsMax int64  `json:"forwards_max,omitempty"`
 }
 
-// Входящее сообщение из pubsub-канала redis-ки
+// rMsg структура, описывающая формат входящего сообщения из pubsub-канала redis-ки.
 type rMsg struct {
-	From    string `json:"from,omitempty"`
-	Chatid  string `json:"chatid,omitempty"`
-	Userid  string `json:"userid,omitempty"`
-	Message string `json:"message,omitempty"`
-	Plugin  string `json:"plugin,omitempty"`
-	Mode    string `json:"mode,omitempty"`
-	Misc    struct {
+	From     string `json:"from,omitempty"`
+	Chatid   string `json:"chatid,omitempty"`
+	Userid   string `json:"userid,omitempty"`
+	Threadid string `json:"threadid,omitempty"`
+	Message  string `json:"message,omitempty"`
+	Plugin   string `json:"plugin,omitempty"`
+	Mode     string `json:"mode,omitempty"`
+	Misc     struct {
 		Answer      int64  `json:"answer,omitempty"`
 		Botnick     string `json:"bot_nick,omitempty"`
 		Csign       string `json:"csign,omitempty"`
@@ -36,15 +39,16 @@ type rMsg struct {
 	} `json:"Misc"`
 }
 
-// Исходящее сообщение в pubsub-канал redis-ки
+// sMsg структура, описывающая формат исходящего сообщения в pubsub-канал redis-ки.
 type sMsg struct {
-	From    string `json:"from"`
-	Chatid  string `json:"chatid"`
-	Userid  string `json:"userid"`
-	Message string `json:"message"`
-	Plugin  string `json:"plugin"`
-	Mode    string `json:"mode"`
-	Misc    struct {
+	From     string `json:"from"`
+	Chatid   string `json:"chatid"`
+	Userid   string `json:"userid"`
+	Threadid string `json:"threadid"`
+	Message  string `json:"message"`
+	Plugin   string `json:"plugin"`
+	Mode     string `json:"mode"`
+	Misc     struct {
 		Answer      int64  `json:"answer"`
 		Botnick     string `json:"bot_nick"`
 		Csign       string `json:"csign"`

vendor/github.com/cespare/xxhash/v2/README.md

@@ -3,8 +3,7 @@
 [![Go Reference](https://pkg.go.dev/badge/github.com/cespare/xxhash/v2.svg)](https://pkg.go.dev/github.com/cespare/xxhash/v2)
 [![Test](https://github.com/cespare/xxhash/actions/workflows/test.yml/badge.svg)](https://github.com/cespare/xxhash/actions/workflows/test.yml)
 
-xxhash is a Go implementation of the 64-bit
-[xxHash](http://cyan4973.github.io/xxHash/) algorithm, XXH64. This is a
+xxhash is a Go implementation of the 64-bit [xxHash] algorithm, XXH64. This is a
 high-quality hashing algorithm that is much faster than anything in the Go
 standard library.
 
@@ -25,8 +24,11 @@ func (*Digest) WriteString(string) (int, error)
 func (*Digest) Sum64() uint64
 ```
 
-This implementation provides a fast pure-Go implementation and an even faster
-assembly implementation for amd64.
+The package is written with optimized pure Go and also contains even faster
+assembly implementations for amd64 and arm64. If desired, the `purego` build tag
+opts into using the Go code even on those architectures.
+
+[xxHash]: http://cyan4973.github.io/xxHash/
 
 ## Compatibility
 
@@ -45,19 +47,20 @@ I recommend using the latest release of Go.
 Here are some quick benchmarks comparing the pure-Go and assembly
 implementations of Sum64.
 
-| input size | purego | asm |
-| --- | --- | --- |
-| 5 B   |  979.66 MB/s |  1291.17 MB/s  |
-| 100 B | 7475.26 MB/s | 7973.40 MB/s  |
-| 4 KB  | 17573.46 MB/s | 17602.65 MB/s |
-| 10 MB | 17131.46 MB/s | 17142.16 MB/s |
+| input size | purego    | asm       |
+| ---------- | --------- | --------- |
+| 4 B        |  1.3 GB/s |  1.2 GB/s |
+| 16 B       |  2.9 GB/s |  3.5 GB/s |
+| 100 B      |  6.9 GB/s |  8.1 GB/s |
+| 4 KB       | 11.7 GB/s | 16.7 GB/s |
+| 10 MB      | 12.0 GB/s | 17.3 GB/s |
 
-These numbers were generated on Ubuntu 18.04 with an Intel i7-8700K CPU using
-the following commands under Go 1.11.2:
+These numbers were generated on Ubuntu 20.04 with an Intel Xeon Platinum 8252C
+CPU using the following commands under Go 1.19.2:
 
 ```
-$ go test -tags purego -benchtime 10s -bench '/xxhash,direct,bytes'
-$ go test -benchtime 10s -bench '/xxhash,direct,bytes'
+benchstat <(go test -tags purego -benchtime 500ms -count 15 -bench 'Sum64$')
+benchstat <(go test -benchtime 500ms -count 15 -bench 'Sum64$')
 ```
 
 ## Projects using this package
@@ -67,3 +70,5 @@ $ go test -benchtime 10s -bench '/xxhash,direct,bytes'
 - [VictoriaMetrics](https://github.com/VictoriaMetrics/VictoriaMetrics)
 - [FreeCache](https://github.com/coocood/freecache)
 - [FastCache](https://github.com/VictoriaMetrics/fastcache)
+- [Ristretto](https://github.com/dgraph-io/ristretto)
+- [Badger](https://github.com/dgraph-io/badger)

vendor/github.com/cespare/xxhash/v2/testall.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+set -eu -o pipefail
+
+# Small convenience script for running the tests with various combinations of
+# arch/tags. This assumes we're running on amd64 and have qemu available.
+
+go test ./...
+go test -tags purego ./...
+GOARCH=arm64 go test
+GOARCH=arm64 go test -tags purego

vendor/github.com/cespare/xxhash/v2/xxhash.go

@@ -16,21 +16,16 @@ const (
 	prime5 uint64 = 2870177450012600261
 )
 
-// NOTE(caleb): I'm using both consts and vars of the primes. Using consts where
-// possible in the Go code is worth a small (but measurable) performance boost
-// by avoiding some MOVQs. Vars are needed for the asm and also are useful for
-// convenience in the Go code in a few places where we need to intentionally
-// avoid constant arithmetic (e.g., v1 := prime1 + prime2 fails because the
-// result overflows a uint64).
-var (
-	prime1v = prime1
-	prime2v = prime2
-	prime3v = prime3
-	prime4v = prime4
-	prime5v = prime5
-)
+// Store the primes in an array as well.
+//
+// The consts are used when possible in Go code to avoid MOVs but we need a
+// contiguous array for the assembly code.
+var primes = [...]uint64{prime1, prime2, prime3, prime4, prime5}
 
 // Digest implements hash.Hash64.
+//
+// Note that a zero-valued Digest is not ready to receive writes.
+// Call Reset or create a Digest using New before calling other methods.
 type Digest struct {
 	v1    uint64
 	v2    uint64
@@ -41,19 +36,31 @@ type Digest struct {
 	n     int // how much of mem is used
 }
 
-// New creates a new Digest that computes the 64-bit xxHash algorithm.
+// New creates a new Digest with a zero seed.
 func New() *Digest {
+	return NewWithSeed(0)
+}
+
+// NewWithSeed creates a new Digest with the given seed.
+func NewWithSeed(seed uint64) *Digest {
 	var d Digest
-	d.Reset()
+	d.ResetWithSeed(seed)
 	return &d
 }
 
 // Reset clears the Digest's state so that it can be reused.
+// It uses a seed value of zero.
 func (d *Digest) Reset() {
-	d.v1 = prime1v + prime2
-	d.v2 = prime2
-	d.v3 = 0
-	d.v4 = -prime1v
+	d.ResetWithSeed(0)
+}
+
+// ResetWithSeed clears the Digest's state so that it can be reused.
+// It uses the given seed to initialize the state.
+func (d *Digest) ResetWithSeed(seed uint64) {
+	d.v1 = seed + prime1 + prime2
+	d.v2 = seed + prime2
+	d.v3 = seed
+	d.v4 = seed - prime1
 	d.total = 0
 	d.n = 0
 }
@@ -69,21 +76,23 @@ func (d *Digest) Write(b []byte) (n int, err error) {
 	n = len(b)
 	d.total += uint64(n)
 
+	memleft := d.mem[d.n&(len(d.mem)-1):]
+
 	if d.n+n < 32 {
 		// This new data doesn't even fill the current block.
-		copy(d.mem[d.n:], b)
+		copy(memleft, b)
 		d.n += n
 		return
 	}
 
 	if d.n > 0 {
 		// Finish off the partial block.
-		copy(d.mem[d.n:], b)
+		c := copy(memleft, b)
 		d.v1 = round(d.v1, u64(d.mem[0:8]))
 		d.v2 = round(d.v2, u64(d.mem[8:16]))
 		d.v3 = round(d.v3, u64(d.mem[16:24]))
 		d.v4 = round(d.v4, u64(d.mem[24:32]))
-		b = b[32-d.n:]
+		b = b[c:]
 		d.n = 0
 	}
 
@@ -133,21 +142,20 @@ func (d *Digest) Sum64() uint64 {
 
 	h += d.total
 
-	i, end := 0, d.n
-	for ; i+8 <= end; i += 8 {
-		k1 := round(0, u64(d.mem[i:i+8]))
+	b := d.mem[:d.n&(len(d.mem)-1)]
+	for ; len(b) >= 8; b = b[8:] {
+		k1 := round(0, u64(b[:8]))
 		h ^= k1
 		h = rol27(h)*prime1 + prime4
 	}
-	if i+4 <= end {
-		h ^= uint64(u32(d.mem[i:i+4])) * prime1
+	if len(b) >= 4 {
+		h ^= uint64(u32(b[:4])) * prime1
 		h = rol23(h)*prime2 + prime3
-		i += 4
+		b = b[4:]
 	}
-	for i < end {
-		h ^= uint64(d.mem[i]) * prime5
+	for ; len(b) > 0; b = b[1:] {
+		h ^= uint64(b[0]) * prime5
 		h = rol11(h) * prime1
-		i++
 	}
 
 	h ^= h >> 33

vendor/github.com/cespare/xxhash/v2/xxhash_amd64.s

@@ -1,215 +1,209 @@
+//go:build !appengine && gc && !purego
 // +build !appengine
 // +build gc
 // +build !purego
 
 #include "textflag.h"
 
-// Register allocation:
-// AX	h
-// SI	pointer to advance through b
-// DX	n
-// BX	loop end
-// R8	v1, k1
-// R9	v2
-// R10	v3
-// R11	v4
-// R12	tmp
-// R13	prime1v
-// R14	prime2v
-// DI	prime4v
+// Registers:
+#define h      AX
+#define d      AX
+#define p      SI // pointer to advance through b
+#define n      DX
+#define end    BX // loop end
+#define v1     R8
+#define v2     R9
+#define v3     R10
+#define v4     R11
+#define x      R12
+#define prime1 R13
+#define prime2 R14
+#define prime4 DI
 
-// round reads from and advances the buffer pointer in SI.
-// It assumes that R13 has prime1v and R14 has prime2v.
-#define round(r) \
-	MOVQ  (SI), R12 \
-	ADDQ  $8, SI    \
-	IMULQ R14, R12  \
-	ADDQ  R12, r    \
-	ROLQ  $31, r    \
-	IMULQ R13, r
+#define round(acc, x) \
+	IMULQ prime2, x   \
+	ADDQ  x, acc      \
+	ROLQ  $31, acc    \
+	IMULQ prime1, acc
 
-// mergeRound applies a merge round on the two registers acc and val.
-// It assumes that R13 has prime1v, R14 has prime2v, and DI has prime4v.
-#define mergeRound(acc, val) \
-	IMULQ R14, val \
-	ROLQ  $31, val \
-	IMULQ R13, val \
-	XORQ  val, acc \
-	IMULQ R13, acc \
-	ADDQ  DI, acc
+// round0 performs the operation x = round(0, x).
+#define round0(x) \
+	IMULQ prime2, x \
+	ROLQ  $31, x    \
+	IMULQ prime1, x
+
+// mergeRound applies a merge round on the two registers acc and x.
+// It assumes that prime1, prime2, and prime4 have been loaded.
+#define mergeRound(acc, x) \
+	round0(x)         \
+	XORQ  x, acc      \
+	IMULQ prime1, acc \
+	ADDQ  prime4, acc
+
+// blockLoop processes as many 32-byte blocks as possible,
+// updating v1, v2, v3, and v4. It assumes that there is at least one block
+// to process.
+#define blockLoop() \
+loop:  \
+	MOVQ +0(p), x  \
+	round(v1, x)   \
+	MOVQ +8(p), x  \
+	round(v2, x)   \
+	MOVQ +16(p), x \
+	round(v3, x)   \
+	MOVQ +24(p), x \
+	round(v4, x)   \
+	ADDQ $32, p    \
+	CMPQ p, end    \
+	JLE  loop
 
 // func Sum64(b []byte) uint64
-TEXT ·Sum64(SB), NOSPLIT, $0-32
+TEXT ·Sum64(SB), NOSPLIT|NOFRAME, $0-32
 	// Load fixed primes.
-	MOVQ ·prime1v(SB), R13
-	MOVQ ·prime2v(SB), R14
-	MOVQ ·prime4v(SB), DI
+	MOVQ ·primes+0(SB), prime1
+	MOVQ ·primes+8(SB), prime2
+	MOVQ ·primes+24(SB), prime4
 
 	// Load slice.
-	MOVQ b_base+0(FP), SI
-	MOVQ b_len+8(FP), DX
-	LEAQ (SI)(DX*1), BX
+	MOVQ b_base+0(FP), p
+	MOVQ b_len+8(FP), n
+	LEAQ (p)(n*1), end
 
 	// The first loop limit will be len(b)-32.
-	SUBQ $32, BX
+	SUBQ $32, end
 
 	// Check whether we have at least one block.
-	CMPQ DX, $32
+	CMPQ n, $32
 	JLT  noBlocks
 
 	// Set up initial state (v1, v2, v3, v4).
-	MOVQ R13, R8
-	ADDQ R14, R8
-	MOVQ R14, R9
-	XORQ R10, R10
-	XORQ R11, R11
-	SUBQ R13, R11
+	MOVQ prime1, v1
+	ADDQ prime2, v1
+	MOVQ prime2, v2
+	XORQ v3, v3
+	XORQ v4, v4
+	SUBQ prime1, v4
 
-	// Loop until SI > BX.
-blockLoop:
-	round(R8)
-	round(R9)
-	round(R10)
-	round(R11)
+	blockLoop()
 
-	CMPQ SI, BX
-	JLE  blockLoop
+	MOVQ v1, h
+	ROLQ $1, h
+	MOVQ v2, x
+	ROLQ $7, x
+	ADDQ x, h
+	MOVQ v3, x
+	ROLQ $12, x
+	ADDQ x, h
+	MOVQ v4, x
+	ROLQ $18, x
+	ADDQ x, h
 
-	MOVQ R8, AX
-	ROLQ $1, AX
-	MOVQ R9, R12
-	ROLQ $7, R12
-	ADDQ R12, AX
-	MOVQ R10, R12
-	ROLQ $12, R12
-	ADDQ R12, AX
-	MOVQ R11, R12
-	ROLQ $18, R12
-	ADDQ R12, AX
-
-	mergeRound(AX, R8)
-	mergeRound(AX, R9)
-	mergeRound(AX, R10)
-	mergeRound(AX, R11)
+	mergeRound(h, v1)
+	mergeRound(h, v2)
+	mergeRound(h, v3)
+	mergeRound(h, v4)
 
 	JMP afterBlocks
 
 noBlocks:
-	MOVQ ·prime5v(SB), AX
+	MOVQ ·primes+32(SB), h
 
 afterBlocks:
-	ADDQ DX, AX
+	ADDQ n, h
 
-	// Right now BX has len(b)-32, and we want to loop until SI > len(b)-8.
-	ADDQ $24, BX
+	ADDQ $24, end
+	CMPQ p, end
+	JG   try4
 
-	CMPQ SI, BX
-	JG   fourByte
+loop8:
+	MOVQ  (p), x
+	ADDQ  $8, p
+	round0(x)
+	XORQ  x, h
+	ROLQ  $27, h
+	IMULQ prime1, h
+	ADDQ  prime4, h
 
-wordLoop:
-	// Calculate k1.
-	MOVQ  (SI), R8
-	ADDQ  $8, SI
-	IMULQ R14, R8
-	ROLQ  $31, R8
-	IMULQ R13, R8
+	CMPQ p, end
+	JLE  loop8
 
-	XORQ  R8, AX
-	ROLQ  $27, AX
-	IMULQ R13, AX
-	ADDQ  DI, AX
+try4:
+	ADDQ $4, end
+	CMPQ p, end
+	JG   try1
 
-	CMPQ SI, BX
-	JLE  wordLoop
+	MOVL  (p), x
+	ADDQ  $4, p
+	IMULQ prime1, x
+	XORQ  x, h
 
-fourByte:
-	ADDQ $4, BX
-	CMPQ SI, BX
-	JG   singles
+	ROLQ  $23, h
+	IMULQ prime2, h
+	ADDQ  ·primes+16(SB), h
 
-	MOVL  (SI), R8
-	ADDQ  $4, SI
-	IMULQ R13, R8
-	XORQ  R8, AX
-
-	ROLQ  $23, AX
-	IMULQ R14, AX
-	ADDQ  ·prime3v(SB), AX
-
-singles:
-	ADDQ $4, BX
-	CMPQ SI, BX
+try1:
+	ADDQ $4, end
+	CMPQ p, end
 	JGE  finalize
 
-singlesLoop:
-	MOVBQZX (SI), R12
-	ADDQ    $1, SI
-	IMULQ   ·prime5v(SB), R12
-	XORQ    R12, AX
+loop1:
+	MOVBQZX (p), x
+	ADDQ    $1, p
+	IMULQ   ·primes+32(SB), x
+	XORQ    x, h
+	ROLQ    $11, h
+	IMULQ   prime1, h
 
-	ROLQ  $11, AX
-	IMULQ R13, AX
-
-	CMPQ SI, BX
-	JL   singlesLoop
+	CMPQ p, end
+	JL   loop1
 
 finalize:
-	MOVQ  AX, R12
-	SHRQ  $33, R12
-	XORQ  R12, AX
-	IMULQ R14, AX
-	MOVQ  AX, R12
-	SHRQ  $29, R12
-	XORQ  R12, AX
-	IMULQ ·prime3v(SB), AX
-	MOVQ  AX, R12
-	SHRQ  $32, R12
-	XORQ  R12, AX
+	MOVQ  h, x
+	SHRQ  $33, x
+	XORQ  x, h
+	IMULQ prime2, h
+	MOVQ  h, x
+	SHRQ  $29, x
+	XORQ  x, h
+	IMULQ ·primes+16(SB), h
+	MOVQ  h, x
+	SHRQ  $32, x
+	XORQ  x, h
 
-	MOVQ AX, ret+24(FP)
+	MOVQ h, ret+24(FP)
 	RET
 
-// writeBlocks uses the same registers as above except that it uses AX to store
-// the d pointer.
-
 // func writeBlocks(d *Digest, b []byte) int
-TEXT ·writeBlocks(SB), NOSPLIT, $0-40
+TEXT ·writeBlocks(SB), NOSPLIT|NOFRAME, $0-40
 	// Load fixed primes needed for round.
-	MOVQ ·prime1v(SB), R13
-	MOVQ ·prime2v(SB), R14
+	MOVQ ·primes+0(SB), prime1
+	MOVQ ·primes+8(SB), prime2
 
 	// Load slice.
-	MOVQ b_base+8(FP), SI
-	MOVQ b_len+16(FP), DX
-	LEAQ (SI)(DX*1), BX
-	SUBQ $32, BX
+	MOVQ b_base+8(FP), p
+	MOVQ b_len+16(FP), n
+	LEAQ (p)(n*1), end
+	SUBQ $32, end
 
 	// Load vN from d.
-	MOVQ d+0(FP), AX
-	MOVQ 0(AX), R8   // v1
-	MOVQ 8(AX), R9   // v2
-	MOVQ 16(AX), R10 // v3
-	MOVQ 24(AX), R11 // v4
+	MOVQ s+0(FP), d
+	MOVQ 0(d), v1
+	MOVQ 8(d), v2
+	MOVQ 16(d), v3
+	MOVQ 24(d), v4
 
 	// We don't need to check the loop condition here; this function is
 	// always called with at least one block of data to process.
-blockLoop:
-	round(R8)
-	round(R9)
-	round(R10)
-	round(R11)
-
-	CMPQ SI, BX
-	JLE  blockLoop
+	blockLoop()
 
 	// Copy vN back to d.
-	MOVQ R8, 0(AX)
-	MOVQ R9, 8(AX)
-	MOVQ R10, 16(AX)
-	MOVQ R11, 24(AX)
+	MOVQ v1, 0(d)
+	MOVQ v2, 8(d)
+	MOVQ v3, 16(d)
+	MOVQ v4, 24(d)
 
-	// The number of bytes written is SI minus the old base pointer.
-	SUBQ b_base+8(FP), SI
-	MOVQ SI, ret+32(FP)
+	// The number of bytes written is p minus the old base pointer.
+	SUBQ b_base+8(FP), p
+	MOVQ p, ret+32(FP)
 
 	RET

vendor/github.com/cespare/xxhash/v2/xxhash_arm64.s

@@ -0,0 +1,183 @@
+//go:build !appengine && gc && !purego
+// +build !appengine
+// +build gc
+// +build !purego
+
+#include "textflag.h"
+
+// Registers:
+#define digest	R1
+#define h	R2 // return value
+#define p	R3 // input pointer
+#define n	R4 // input length
+#define nblocks	R5 // n / 32
+#define prime1	R7
+#define prime2	R8
+#define prime3	R9
+#define prime4	R10
+#define prime5	R11
+#define v1	R12
+#define v2	R13
+#define v3	R14
+#define v4	R15
+#define x1	R20
+#define x2	R21
+#define x3	R22
+#define x4	R23
+
+#define round(acc, x) \
+	MADD prime2, acc, x, acc \
+	ROR  $64-31, acc         \
+	MUL  prime1, acc
+
+// round0 performs the operation x = round(0, x).
+#define round0(x) \
+	MUL prime2, x \
+	ROR $64-31, x \
+	MUL prime1, x
+
+#define mergeRound(acc, x) \
+	round0(x)                     \
+	EOR  x, acc                   \
+	MADD acc, prime4, prime1, acc
+
+// blockLoop processes as many 32-byte blocks as possible,
+// updating v1, v2, v3, and v4. It assumes that n >= 32.
+#define blockLoop() \
+	LSR     $5, n, nblocks  \
+	PCALIGN $16             \
+	loop:                   \
+	LDP.P   16(p), (x1, x2) \
+	LDP.P   16(p), (x3, x4) \
+	round(v1, x1)           \
+	round(v2, x2)           \
+	round(v3, x3)           \
+	round(v4, x4)           \
+	SUB     $1, nblocks     \
+	CBNZ    nblocks, loop
+
+// func Sum64(b []byte) uint64
+TEXT ·Sum64(SB), NOSPLIT|NOFRAME, $0-32
+	LDP b_base+0(FP), (p, n)
+
+	LDP  ·primes+0(SB), (prime1, prime2)
+	LDP  ·primes+16(SB), (prime3, prime4)
+	MOVD ·primes+32(SB), prime5
+
+	CMP  $32, n
+	CSEL LT, prime5, ZR, h // if n < 32 { h = prime5 } else { h = 0 }
+	BLT  afterLoop
+
+	ADD  prime1, prime2, v1
+	MOVD prime2, v2
+	MOVD $0, v3
+	NEG  prime1, v4
+
+	blockLoop()
+
+	ROR $64-1, v1, x1
+	ROR $64-7, v2, x2
+	ADD x1, x2
+	ROR $64-12, v3, x3
+	ROR $64-18, v4, x4
+	ADD x3, x4
+	ADD x2, x4, h
+
+	mergeRound(h, v1)
+	mergeRound(h, v2)
+	mergeRound(h, v3)
+	mergeRound(h, v4)
+
+afterLoop:
+	ADD n, h
+
+	TBZ   $4, n, try8
+	LDP.P 16(p), (x1, x2)
+
+	round0(x1)
+
+	// NOTE: here and below, sequencing the EOR after the ROR (using a
+	// rotated register) is worth a small but measurable speedup for small
+	// inputs.
+	ROR  $64-27, h
+	EOR  x1 @> 64-27, h, h
+	MADD h, prime4, prime1, h
+
+	round0(x2)
+	ROR  $64-27, h
+	EOR  x2 @> 64-27, h, h
+	MADD h, prime4, prime1, h
+
+try8:
+	TBZ    $3, n, try4
+	MOVD.P 8(p), x1
+
+	round0(x1)
+	ROR  $64-27, h
+	EOR  x1 @> 64-27, h, h
+	MADD h, prime4, prime1, h
+
+try4:
+	TBZ     $2, n, try2
+	MOVWU.P 4(p), x2
+
+	MUL  prime1, x2
+	ROR  $64-23, h
+	EOR  x2 @> 64-23, h, h
+	MADD h, prime3, prime2, h
+
+try2:
+	TBZ     $1, n, try1
+	MOVHU.P 2(p), x3
+	AND     $255, x3, x1
+	LSR     $8, x3, x2
+
+	MUL prime5, x1
+	ROR $64-11, h
+	EOR x1 @> 64-11, h, h
+	MUL prime1, h
+
+	MUL prime5, x2
+	ROR $64-11, h
+	EOR x2 @> 64-11, h, h
+	MUL prime1, h
+
+try1:
+	TBZ   $0, n, finalize
+	MOVBU (p), x4
+
+	MUL prime5, x4
+	ROR $64-11, h
+	EOR x4 @> 64-11, h, h
+	MUL prime1, h
+
+finalize:
+	EOR h >> 33, h
+	MUL prime2, h
+	EOR h >> 29, h
+	MUL prime3, h
+	EOR h >> 32, h
+
+	MOVD h, ret+24(FP)
+	RET
+
+// func writeBlocks(d *Digest, b []byte) int
+TEXT ·writeBlocks(SB), NOSPLIT|NOFRAME, $0-40
+	LDP ·primes+0(SB), (prime1, prime2)
+
+	// Load state. Assume v[1-4] are stored contiguously.
+	MOVD d+0(FP), digest
+	LDP  0(digest), (v1, v2)
+	LDP  16(digest), (v3, v4)
+
+	LDP b_base+8(FP), (p, n)
+
+	blockLoop()
+
+	// Store updated state.
+	STP (v1, v2), 0(digest)
+	STP (v3, v4), 16(digest)
+
+	BIC  $31, n
+	MOVD n, ret+32(FP)
+	RET

vendor/github.com/cespare/xxhash/v2/xxhash_asm.go

@@ -1,10 +1,12 @@
+//go:build (amd64 || arm64) && !appengine && gc && !purego
+// +build amd64 arm64
 // +build !appengine
 // +build gc
 // +build !purego
 
 package xxhash
 
-// Sum64 computes the 64-bit xxHash digest of b.
+// Sum64 computes the 64-bit xxHash digest of b with a zero seed.
 //
 //go:noescape
 func Sum64(b []byte) uint64

vendor/github.com/cespare/xxhash/v2/xxhash_other.go

@@ -1,8 +1,9 @@
-// +build !amd64 appengine !gc purego
+//go:build (!amd64 && !arm64) || appengine || !gc || purego
+// +build !amd64,!arm64 appengine !gc purego
 
 package xxhash
 
-// Sum64 computes the 64-bit xxHash digest of b.
+// Sum64 computes the 64-bit xxHash digest of b with a zero seed.
 func Sum64(b []byte) uint64 {
 	// A simpler version would be
 	//   d := New()
@@ -14,10 +15,10 @@ func Sum64(b []byte) uint64 {
 	var h uint64
 
 	if n >= 32 {
-		v1 := prime1v + prime2
+		v1 := primes[0] + prime2
 		v2 := prime2
 		v3 := uint64(0)
-		v4 := -prime1v
+		v4 := -primes[0]
 		for len(b) >= 32 {
 			v1 = round(v1, u64(b[0:8:len(b)]))
 			v2 = round(v2, u64(b[8:16:len(b)]))
@@ -36,19 +37,18 @@ func Sum64(b []byte) uint64 {
 
 	h += uint64(n)
 
-	i, end := 0, len(b)
-	for ; i+8 <= end; i += 8 {
-		k1 := round(0, u64(b[i:i+8:len(b)]))
+	for ; len(b) >= 8; b = b[8:] {
+		k1 := round(0, u64(b[:8]))
 		h ^= k1
 		h = rol27(h)*prime1 + prime4
 	}
-	if i+4 <= end {
-		h ^= uint64(u32(b[i:i+4:len(b)])) * prime1
+	if len(b) >= 4 {
+		h ^= uint64(u32(b[:4])) * prime1
 		h = rol23(h)*prime2 + prime3
-		i += 4
+		b = b[4:]
 	}
-	for ; i < end; i++ {
-		h ^= uint64(b[i]) * prime5
+	for ; len(b) > 0; b = b[1:] {
+		h ^= uint64(b[0]) * prime5
 		h = rol11(h) * prime1
 	}
 

vendor/github.com/cespare/xxhash/v2/xxhash_safe.go

@@ -1,10 +1,11 @@
+//go:build appengine
 // +build appengine
 
 // This file contains the safe implementations of otherwise unsafe-using code.
 
 package xxhash
 
-// Sum64String computes the 64-bit xxHash digest of s.
+// Sum64String computes the 64-bit xxHash digest of s with a zero seed.
 func Sum64String(s string) uint64 {
 	return Sum64([]byte(s))
 }

vendor/github.com/cespare/xxhash/v2/xxhash_unsafe.go

@@ -1,3 +1,4 @@
+//go:build !appengine
 // +build !appengine
 
 // This file encapsulates usage of unsafe.
@@ -11,7 +12,7 @@ import (
 
 // In the future it's possible that compiler optimizations will make these
 // XxxString functions unnecessary by realizing that calls such as
-// Sum64([]byte(s)) don't need to copy s. See https://golang.org/issue/2205.
+// Sum64([]byte(s)) don't need to copy s. See https://go.dev/issue/2205.
 // If that happens, even if we keep these functions they can be replaced with
 // the trivial safe code.
 
@@ -32,7 +33,7 @@ import (
 //
 // See https://github.com/golang/go/issues/42739 for discussion.
 
-// Sum64String computes the 64-bit xxHash digest of s.
+// Sum64String computes the 64-bit xxHash digest of s with a zero seed.
 // It may be faster than Sum64([]byte(s)) by avoiding a copy.
 func Sum64String(s string) uint64 {
 	b := *(*[]byte)(unsafe.Pointer(&sliceHeader{s, len(s)}))

vendor/github.com/go-redis/redis/v8/.golangci.yml

@@ -2,26 +2,3 @@ run:
   concurrency: 8
   deadline: 5m
   tests: false
-linters:
-  enable-all: true
-  disable:
-    - funlen
-    - gochecknoglobals
-    - gochecknoinits
-    - gocognit
-    - goconst
-    - godox
-    - gosec
-    - maligned
-    - wsl
-    - gomnd
-    - goerr113
-    - exhaustive
-    - nestif
-    - nlreturn
-    - exhaustivestruct
-    - wrapcheck
-    - errorlint
-    - cyclop
-    - forcetypeassert
-    - forbidigo

vendor/github.com/go-redis/redis/v8/CHANGELOG.md

@@ -1,3 +1,31 @@
+## [8.11.5](https://github.com/go-redis/redis/compare/v8.11.4...v8.11.5) (2022-03-17)
+
+
+### Bug Fixes
+
+* add missing Expire methods to Cmdable ([17e3b43](https://github.com/go-redis/redis/commit/17e3b43879d516437ada71cf9c0deac6a382ed9a))
+* add whitespace for avoid unlikely colisions ([7f7c181](https://github.com/go-redis/redis/commit/7f7c1817617cfec909efb13d14ad22ef05a6ad4c))
+* example/otel compile error ([#2028](https://github.com/go-redis/redis/issues/2028)) ([187c07c](https://github.com/go-redis/redis/commit/187c07c41bf68dc3ab280bc3a925e960bbef6475))
+* **extra/redisotel:** set span.kind attribute to client ([065b200](https://github.com/go-redis/redis/commit/065b200070b41e6e949710b4f9e01b50ccc60ab2))
+* format ([96f53a0](https://github.com/go-redis/redis/commit/96f53a0159a28affa94beec1543a62234e7f8b32))
+* invalid type assert in stringArg ([de6c131](https://github.com/go-redis/redis/commit/de6c131865b8263400c8491777b295035f2408e4))
+* rename Golang to Go ([#2030](https://github.com/go-redis/redis/issues/2030)) ([b82a2d9](https://github.com/go-redis/redis/commit/b82a2d9d4d2de7b7cbe8fcd4895be62dbcacacbc))
+* set timeout for WAIT command. Fixes [#1963](https://github.com/go-redis/redis/issues/1963) ([333fee1](https://github.com/go-redis/redis/commit/333fee1a8fd98a2fbff1ab187c1b03246a7eb01f))
+* update some argument counts in pre-allocs ([f6974eb](https://github.com/go-redis/redis/commit/f6974ebb5c40a8adf90d2cacab6dc297f4eba4c2))
+
+
+### Features
+
+* Add redis v7's NX, XX, GT, LT expire variants ([e19bbb2](https://github.com/go-redis/redis/commit/e19bbb26e2e395c6e077b48d80d79e99f729a8b8))
+* add support for acl sentinel auth in universal client ([ab0ccc4](https://github.com/go-redis/redis/commit/ab0ccc47413f9b2a6eabc852fed5005a3ee1af6e))
+* add support for COPY command ([#2016](https://github.com/go-redis/redis/issues/2016)) ([730afbc](https://github.com/go-redis/redis/commit/730afbcffb93760e8a36cc06cfe55ab102b693a7))
+* add support for passing extra attributes added to spans ([39faaa1](https://github.com/go-redis/redis/commit/39faaa171523834ba527c9789710c4fde87f5a2e))
+* add support for time.Duration write and scan ([2f1b74e](https://github.com/go-redis/redis/commit/2f1b74e20cdd7719b2aecf0768d3e3ae7c3e781b))
+* **redisotel:** ability to override TracerProvider ([#1998](https://github.com/go-redis/redis/issues/1998)) ([bf8d4aa](https://github.com/go-redis/redis/commit/bf8d4aa60c00366cda2e98c3ddddc8cf68507417))
+* set net.peer.name and net.peer.port in otel example ([69bf454](https://github.com/go-redis/redis/commit/69bf454f706204211cd34835f76b2e8192d3766d))
+
+
+
 ## [8.11.4](https://github.com/go-redis/redis/compare/v8.11.3...v8.11.4) (2021-10-04)
 
 

vendor/github.com/go-redis/redis/v8/README.md

@@ -1,19 +1,16 @@
-<p align="center">
-  <a href="https://uptrace.dev/?utm_source=gh-redis&utm_campaign=gh-redis-banner1">
-    <img src="https://raw.githubusercontent.com/uptrace/roadmap/master/banner1.png" alt="All-in-one tool to optimize performance and monitor errors & logs">
-  </a>
-</p>
-
-# Redis client for Golang
+# Redis client for Go
 
 ![build workflow](https://github.com/go-redis/redis/actions/workflows/build.yml/badge.svg)
 [![PkgGoDev](https://pkg.go.dev/badge/github.com/go-redis/redis/v8)](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc)
 [![Documentation](https://img.shields.io/badge/redis-documentation-informational)](https://redis.uptrace.dev/)
-[![Chat](https://discordapp.com/api/guilds/752070105847955518/widget.png)](https://discord.gg/rWtp5Aj)
 
-- To ask questions, join [Discord](https://discord.gg/rWtp5Aj) or use
-  [Discussions](https://github.com/go-redis/redis/discussions).
-- [Newsletter](https://blog.uptrace.dev/pages/newsletter.html) to get latest updates.
+go-redis is brought to you by :star: [**uptrace/uptrace**](https://github.com/uptrace/uptrace).
+Uptrace is an open source and blazingly fast **distributed tracing** backend powered by
+OpenTelemetry and ClickHouse. Give it a star as well!
+
+## Resources
+
+- [Discussions](https://github.com/go-redis/redis/discussions)
 - [Documentation](https://redis.uptrace.dev)
 - [Reference](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc)
 - [Examples](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#pkg-examples)
@@ -22,15 +19,14 @@
 Other projects you may like:
 
 - [Bun](https://bun.uptrace.dev) - fast and simple SQL client for PostgreSQL, MySQL, and SQLite.
-- [treemux](https://github.com/vmihailenco/treemux) - high-speed, flexible, tree-based HTTP router
-  for Go.
+- [BunRouter](https://bunrouter.uptrace.dev/) - fast and flexible HTTP router for Go.
 
 ## Ecosystem
 
-- [Redis Mock](https://github.com/go-redis/redismock).
-- [Distributed Locks](https://github.com/bsm/redislock).
-- [Redis Cache](https://github.com/go-redis/cache).
-- [Rate limiting](https://github.com/go-redis/redis_rate).
+- [Redis Mock](https://github.com/go-redis/redismock)
+- [Distributed Locks](https://github.com/bsm/redislock)
+- [Redis Cache](https://github.com/go-redis/cache)
+- [Rate limiting](https://github.com/go-redis/redis_rate)
 
 ## Features
 
@@ -39,16 +35,16 @@ Other projects you may like:
   [circuit breaker](https://en.wikipedia.org/wiki/Circuit_breaker_design_pattern) support.
 - [Pub/Sub](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#PubSub).
 - [Transactions](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-Client-TxPipeline).
-- [Pipeline](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-Client-Pipeline) and
-  [TxPipeline](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-Client-TxPipeline).
+- [Pipeline](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-Client.Pipeline) and
+  [TxPipeline](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-Client.TxPipeline).
 - [Scripting](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#Script).
 - [Timeouts](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#Options).
 - [Redis Sentinel](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#NewFailoverClient).
 - [Redis Cluster](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#NewClusterClient).
-- [Cluster of Redis Servers](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-NewClusterClient--ManualSetup)
+- [Cluster of Redis Servers](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-NewClusterClient-ManualSetup)
   without using cluster mode and Redis Sentinel.
 - [Ring](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#NewRing).
-- [Instrumentation](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#ex-package--Instrumentation).
+- [Instrumentation](https://pkg.go.dev/github.com/go-redis/redis/v8?tab=doc#example-package-Instrumentation).
 
 ## Installation
 
@@ -72,6 +68,7 @@ go get github.com/go-redis/redis/v8
 import (
     "context"
     "github.com/go-redis/redis/v8"
+    "fmt"
 )
 
 var ctx = context.Background()

vendor/github.com/go-redis/redis/v8/command.go

@@ -20,7 +20,7 @@ type Cmder interface {
 	String() string
 	stringArg(int) string
 	firstKeyPos() int8
-	setFirstKeyPos(int8)
+	SetFirstKeyPos(int8)
 
 	readTimeout() *time.Duration
 	readReply(rd *proto.Reader) error
@@ -151,15 +151,21 @@ func (cmd *baseCmd) stringArg(pos int) string {
 	if pos < 0 || pos >= len(cmd.args) {
 		return ""
 	}
-	s, _ := cmd.args[pos].(string)
-	return s
+	arg := cmd.args[pos]
+	switch v := arg.(type) {
+	case string:
+		return v
+	default:
+		// TODO: consider using appendArg
+		return fmt.Sprint(v)
+	}
 }
 
 func (cmd *baseCmd) firstKeyPos() int8 {
 	return cmd.keyPos
 }
 
-func (cmd *baseCmd) setFirstKeyPos(keyPos int8) {
+func (cmd *baseCmd) SetFirstKeyPos(keyPos int8) {
 	cmd.keyPos = keyPos
 }
 

vendor/github.com/go-redis/redis/v8/commands.go

@@ -96,6 +96,10 @@ type Cmdable interface {
 	Exists(ctx context.Context, keys ...string) *IntCmd
 	Expire(ctx context.Context, key string, expiration time.Duration) *BoolCmd
 	ExpireAt(ctx context.Context, key string, tm time.Time) *BoolCmd
+	ExpireNX(ctx context.Context, key string, expiration time.Duration) *BoolCmd
+	ExpireXX(ctx context.Context, key string, expiration time.Duration) *BoolCmd
+	ExpireGT(ctx context.Context, key string, expiration time.Duration) *BoolCmd
+	ExpireLT(ctx context.Context, key string, expiration time.Duration) *BoolCmd
 	Keys(ctx context.Context, pattern string) *StringSliceCmd
 	Migrate(ctx context.Context, host, port, key string, db int, timeout time.Duration) *StatusCmd
 	Move(ctx context.Context, key string, db int) *BoolCmd
@@ -139,6 +143,7 @@ type Cmdable interface {
 	SetXX(ctx context.Context, key string, value interface{}, expiration time.Duration) *BoolCmd
 	SetRange(ctx context.Context, key string, offset int64, value string) *IntCmd
 	StrLen(ctx context.Context, key string) *IntCmd
+	Copy(ctx context.Context, sourceKey string, destKey string, db int, replace bool) *IntCmd
 
 	GetBit(ctx context.Context, key string, offset int64) *IntCmd
 	SetBit(ctx context.Context, key string, offset int64, value int) *IntCmd
@@ -431,6 +436,7 @@ func (c statefulCmdable) AuthACL(ctx context.Context, username, password string)
 
 func (c cmdable) Wait(ctx context.Context, numSlaves int, timeout time.Duration) *IntCmd {
 	cmd := NewIntCmd(ctx, "wait", numSlaves, int(timeout/time.Millisecond))
+	cmd.setReadTimeout(timeout)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -525,7 +531,37 @@ func (c cmdable) Exists(ctx context.Context, keys ...string) *IntCmd {
 }
 
 func (c cmdable) Expire(ctx context.Context, key string, expiration time.Duration) *BoolCmd {
-	cmd := NewBoolCmd(ctx, "expire", key, formatSec(ctx, expiration))
+	return c.expire(ctx, key, expiration, "")
+}
+
+func (c cmdable) ExpireNX(ctx context.Context, key string, expiration time.Duration) *BoolCmd {
+	return c.expire(ctx, key, expiration, "NX")
+}
+
+func (c cmdable) ExpireXX(ctx context.Context, key string, expiration time.Duration) *BoolCmd {
+	return c.expire(ctx, key, expiration, "XX")
+}
+
+func (c cmdable) ExpireGT(ctx context.Context, key string, expiration time.Duration) *BoolCmd {
+	return c.expire(ctx, key, expiration, "GT")
+}
+
+func (c cmdable) ExpireLT(ctx context.Context, key string, expiration time.Duration) *BoolCmd {
+	return c.expire(ctx, key, expiration, "LT")
+}
+
+func (c cmdable) expire(
+	ctx context.Context, key string, expiration time.Duration, mode string,
+) *BoolCmd {
+	args := make([]interface{}, 3, 4)
+	args[0] = "expire"
+	args[1] = key
+	args[2] = formatSec(ctx, expiration)
+	if mode != "" {
+		args = append(args, mode)
+	}
+
+	cmd := NewBoolCmd(ctx, args...)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -990,6 +1026,16 @@ func (c cmdable) StrLen(ctx context.Context, key string) *IntCmd {
 	return cmd
 }
 
+func (c cmdable) Copy(ctx context.Context, sourceKey, destKey string, db int, replace bool) *IntCmd {
+	args := []interface{}{"copy", sourceKey, destKey, "DB", db}
+	if replace {
+		args = append(args, "REPLACE")
+	}
+	cmd := NewIntCmd(ctx, args...)
+	_ = c(ctx, cmd)
+	return cmd
+}
+
 //------------------------------------------------------------------------------
 
 func (c cmdable) GetBit(ctx context.Context, key string, offset int64) *IntCmd {
@@ -1778,7 +1824,7 @@ type XReadArgs struct {
 }
 
 func (c cmdable) XRead(ctx context.Context, a *XReadArgs) *XStreamSliceCmd {
-	args := make([]interface{}, 0, 5+len(a.Streams))
+	args := make([]interface{}, 0, 6+len(a.Streams))
 	args = append(args, "xread")
 
 	keyPos := int8(1)
@@ -1802,7 +1848,7 @@ func (c cmdable) XRead(ctx context.Context, a *XReadArgs) *XStreamSliceCmd {
 	if a.Block >= 0 {
 		cmd.setReadTimeout(a.Block)
 	}
-	cmd.setFirstKeyPos(keyPos)
+	cmd.SetFirstKeyPos(keyPos)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -1860,7 +1906,7 @@ type XReadGroupArgs struct {
 }
 
 func (c cmdable) XReadGroup(ctx context.Context, a *XReadGroupArgs) *XStreamSliceCmd {
-	args := make([]interface{}, 0, 8+len(a.Streams))
+	args := make([]interface{}, 0, 10+len(a.Streams))
 	args = append(args, "xreadgroup", "group", a.Group, a.Consumer)
 
 	keyPos := int8(4)
@@ -1886,7 +1932,7 @@ func (c cmdable) XReadGroup(ctx context.Context, a *XReadGroupArgs) *XStreamSlic
 	if a.Block >= 0 {
 		cmd.setReadTimeout(a.Block)
 	}
-	cmd.setFirstKeyPos(keyPos)
+	cmd.SetFirstKeyPos(keyPos)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -1957,7 +2003,7 @@ func (c cmdable) XAutoClaimJustID(ctx context.Context, a *XAutoClaimArgs) *XAuto
 }
 
 func xAutoClaimArgs(ctx context.Context, a *XAutoClaimArgs) []interface{} {
-	args := make([]interface{}, 0, 9)
+	args := make([]interface{}, 0, 8)
 	args = append(args, "xautoclaim", a.Stream, a.Group, a.Consumer, formatMs(ctx, a.MinIdle), a.Start)
 	if a.Count > 0 {
 		args = append(args, "count", a.Count)
@@ -1989,7 +2035,7 @@ func (c cmdable) XClaimJustID(ctx context.Context, a *XClaimArgs) *StringSliceCm
 }
 
 func xClaimArgs(a *XClaimArgs) []interface{} {
-	args := make([]interface{}, 0, 4+len(a.Messages))
+	args := make([]interface{}, 0, 5+len(a.Messages))
 	args = append(args,
 		"xclaim",
 		a.Stream,
@@ -2362,7 +2408,7 @@ func (c cmdable) ZInterStore(ctx context.Context, destination string, store *ZSt
 	args = append(args, "zinterstore", destination, len(store.Keys))
 	args = store.appendArgs(args)
 	cmd := NewIntCmd(ctx, args...)
-	cmd.setFirstKeyPos(3)
+	cmd.SetFirstKeyPos(3)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2372,7 +2418,7 @@ func (c cmdable) ZInter(ctx context.Context, store *ZStore) *StringSliceCmd {
 	args = append(args, "zinter", len(store.Keys))
 	args = store.appendArgs(args)
 	cmd := NewStringSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2383,7 +2429,7 @@ func (c cmdable) ZInterWithScores(ctx context.Context, store *ZStore) *ZSliceCmd
 	args = store.appendArgs(args)
 	args = append(args, "withscores")
 	cmd := NewZSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2710,7 +2756,7 @@ func (c cmdable) ZUnion(ctx context.Context, store ZStore) *StringSliceCmd {
 	args = append(args, "zunion", len(store.Keys))
 	args = store.appendArgs(args)
 	cmd := NewStringSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2721,7 +2767,7 @@ func (c cmdable) ZUnionWithScores(ctx context.Context, store ZStore) *ZSliceCmd
 	args = store.appendArgs(args)
 	args = append(args, "withscores")
 	cmd := NewZSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2731,7 +2777,7 @@ func (c cmdable) ZUnionStore(ctx context.Context, dest string, store *ZStore) *I
 	args = append(args, "zunionstore", dest, len(store.Keys))
 	args = store.appendArgs(args)
 	cmd := NewIntCmd(ctx, args...)
-	cmd.setFirstKeyPos(3)
+	cmd.SetFirstKeyPos(3)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2761,7 +2807,7 @@ func (c cmdable) ZDiff(ctx context.Context, keys ...string) *StringSliceCmd {
 	}
 
 	cmd := NewStringSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -2777,7 +2823,7 @@ func (c cmdable) ZDiffWithScores(ctx context.Context, keys ...string) *ZSliceCmd
 	args[len(keys)+2] = "withscores"
 
 	cmd := NewZSliceCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -3053,7 +3099,7 @@ func (c cmdable) MemoryUsage(ctx context.Context, key string, samples ...int) *I
 		args = append(args, "SAMPLES", samples[0])
 	}
 	cmd := NewIntCmd(ctx, args...)
-	cmd.setFirstKeyPos(2)
+	cmd.SetFirstKeyPos(2)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -3070,7 +3116,7 @@ func (c cmdable) Eval(ctx context.Context, script string, keys []string, args ..
 	}
 	cmdArgs = appendArgs(cmdArgs, args)
 	cmd := NewCmd(ctx, cmdArgs...)
-	cmd.setFirstKeyPos(3)
+	cmd.SetFirstKeyPos(3)
 	_ = c(ctx, cmd)
 	return cmd
 }
@@ -3085,7 +3131,7 @@ func (c cmdable) EvalSha(ctx context.Context, sha1 string, keys []string, args .
 	}
 	cmdArgs = appendArgs(cmdArgs, args)
 	cmd := NewCmd(ctx, cmdArgs...)
-	cmd.setFirstKeyPos(3)
+	cmd.SetFirstKeyPos(3)
 	_ = c(ctx, cmd)
 	return cmd
 }

vendor/github.com/go-redis/redis/v8/error.go

@@ -134,7 +134,7 @@ func isMovedSameConnAddr(err error, addr string) bool {
 	if !strings.HasPrefix(redisError, "MOVED ") {
 		return false
 	}
-	return strings.HasSuffix(redisError, addr)
+	return strings.HasSuffix(redisError, " "+addr)
 }
 
 //------------------------------------------------------------------------------

vendor/github.com/go-redis/redis/v8/internal/proto/scan.go

@@ -10,6 +10,7 @@ import (
 )
 
 // Scan parses bytes `b` to `v` with appropriate type.
+//nolint:gocyclo
 func Scan(b []byte, v interface{}) error {
 	switch v := v.(type) {
 	case nil:
@@ -105,6 +106,13 @@ func Scan(b []byte, v interface{}) error {
 		var err error
 		*v, err = time.Parse(time.RFC3339Nano, util.BytesToString(b))
 		return err
+	case *time.Duration:
+		n, err := util.ParseInt(b, 10, 64)
+		if err != nil {
+			return err
+		}
+		*v = time.Duration(n)
+		return nil
 	case encoding.BinaryUnmarshaler:
 		return v.UnmarshalBinary(b)
 	default:

vendor/github.com/go-redis/redis/v8/internal/proto/writer.go

@@ -98,6 +98,8 @@ func (w *Writer) WriteArg(v interface{}) error {
 	case time.Time:
 		w.numBuf = v.AppendFormat(w.numBuf[:0], time.RFC3339Nano)
 		return w.bytes(w.numBuf)
+	case time.Duration:
+		return w.int(v.Nanoseconds())
 	case encoding.BinaryMarshaler:
 		b, err := v.MarshalBinary()
 		if err != nil {

vendor/github.com/go-redis/redis/v8/package.json

@@ -1,6 +1,6 @@
 {
   "name": "redis",
-  "version": "8.11.4",
+  "version": "8.11.5",
   "main": "index.js",
   "repository": "git@github.com:go-redis/redis.git",
   "author": "Vladimir Mihailenco <vladimir.webdev@gmail.com>",

vendor/github.com/go-redis/redis/v8/pipeline.go

@@ -24,6 +24,7 @@ type pipelineExecer func(context.Context, []Cmder) error
 // depends of your batch size and/or use TxPipeline.
 type Pipeliner interface {
 	StatefulCmdable
+	Len() int
 	Do(ctx context.Context, args ...interface{}) *Cmd
 	Process(ctx context.Context, cmd Cmder) error
 	Close() error
@@ -53,6 +54,15 @@ func (c *Pipeline) init() {
 	c.statefulCmdable = c.Process
 }
 
+// Len returns the number of queued commands.
+func (c *Pipeline) Len() int {
+	c.mu.Lock()
+	ln := len(c.cmds)
+	c.mu.Unlock()
+	return ln
+}
+
+// Do queues the custom command for later execution.
 func (c *Pipeline) Do(ctx context.Context, args ...interface{}) *Cmd {
 	cmd := NewCmd(ctx, args...)
 	_ = c.Process(ctx, cmd)

vendor/github.com/go-redis/redis/v8/ring.go

@@ -576,7 +576,7 @@ func (c *Ring) cmdInfo(ctx context.Context, name string) *CommandInfo {
 	}
 	info := cmdsInfo[name]
 	if info == nil {
-		internal.Logger.Printf(c.Context(), "info for cmd=%s not found", name)
+		internal.Logger.Printf(ctx, "info for cmd=%s not found", name)
 	}
 	return info
 }

vendor/github.com/go-redis/redis/v8/universal.go

@@ -25,6 +25,7 @@ type UniversalOptions struct {
 
 	Username         string
 	Password         string
+	SentinelUsername string
 	SentinelPassword string
 
 	MaxRetries      int
@@ -114,6 +115,7 @@ func (o *UniversalOptions) Failover() *FailoverOptions {
 		DB:               o.DB,
 		Username:         o.Username,
 		Password:         o.Password,
+		SentinelUsername: o.SentinelUsername,
 		SentinelPassword: o.SentinelPassword,
 
 		MaxRetries:      o.MaxRetries,

vendor/github.com/go-redis/redis/v8/version.go

@@ -2,5 +2,5 @@ package redis
 
 // Version is the current release version.
 func Version() string {
-	return "8.11.4"
+	return "8.11.5"
 }

vendor/github.com/hjson/hjson-go/.travis.yml

@@ -1,48 +0,0 @@
-language: go
-go:
-- 1.6
-- 1.7
-- 1.8
-- tip
-install: true
-script:
-- go install github.com/hjson/hjson-go
-- go install github.com/hjson/hjson-go/hjson-cli
-- go test -v github.com/hjson/hjson-go
-before_deploy:
-  - ./build_release.sh
-deploy:
-  provider: releases
-  file:
-  - _dist/darwin_386.tar.gz
-  - _dist/darwin_amd64.tar.gz
-  - _dist/dragonfly_amd64.tar.gz
-  - _dist/freebsd_386.tar.gz
-  - _dist/freebsd_amd64.tar.gz
-  - _dist/freebsd_arm.tar.gz
-  - _dist/linux_386.tar.gz
-  - _dist/linux_amd64.tar.gz
-  - _dist/linux_arm.tar.gz
-  - _dist/linux_arm64.tar.gz
-  - _dist/linux_mips64.tar.gz
-  - _dist/linux_mips64le.tar.gz
-  - _dist/linux_ppc64.tar.gz
-  - _dist/linux_ppc64le.tar.gz
-  - _dist/netbsd_386.tar.gz
-  - _dist/netbsd_amd64.tar.gz
-  - _dist/netbsd_arm.tar.gz
-  - _dist/openbsd_386.tar.gz
-  - _dist/openbsd_amd64.tar.gz
-  - _dist/openbsd_arm.tar.gz
-  - _dist/plan9_386.tar.gz
-  - _dist/plan9_amd64.tar.gz
-  - _dist/solaris_amd64.tar.gz
-  - _dist/windows_386.zip
-  - _dist/windows_amd64.zip
-  overwrite: true
-  skip_cleanup: true
-  on:
-    tags: true
-    go: 1.7
-  api-key:
-    secure: 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

vendor/github.com/hjson/hjson-go/README.md

@@ -1,6 +1,6 @@
 # hjson-go
 
-[![Build Status](https://img.shields.io/travis/hjson/hjson-go.svg?style=flat-square)](https://travis-ci.org/hjson/hjson-go)
+[![Build Status](https://github.com/hjson/hjson-go/workflows/test/badge.svg)](https://github.com/hjson/hjson-go/actions)
 [![Go Pkg](https://img.shields.io/github/release/hjson/hjson-go.svg?style=flat-square&label=go-pkg)](https://github.com/hjson/hjson-go/releases)
 [![Go Report Card](https://goreportcard.com/badge/github.com/hjson/hjson-go?style=flat-square)](https://goreportcard.com/report/github.com/hjson/hjson-go)
 [![coverage](https://img.shields.io/badge/coverage-ok-brightgreen.svg?style=flat-square)](http://gocover.io/github.com/hjson/hjson-go/)

vendor/github.com/hjson/hjson-go/encode.go

@@ -20,12 +20,16 @@ type EncoderOptions struct {
 	Eol string
 	// Place braces on the same line
 	BracesSameLine bool
-	// Deprecated: Hjson always emits braces
+	// Emit braces for the root object
 	EmitRootBraces bool
 	// Always place string in quotes
 	QuoteAlways bool
+	// Place string in quotes if it could otherwise be a number, boolean or null
+	QuoteAmbiguousStrings bool
 	// Indent string
 	IndentBy string
+	// Base indentation string
+	BaseIndentation string
 	// Allow the -0 value (unlike ES6)
 	AllowMinusZero bool
 	// Encode unknown values as 'null'
@@ -39,7 +43,9 @@ func DefaultOptions() EncoderOptions {
 	opt.BracesSameLine = false
 	opt.EmitRootBraces = true
 	opt.QuoteAlways = false
+	opt.QuoteAmbiguousStrings = true
 	opt.IndentBy = "  "
+	opt.BaseIndentation = ""
 	opt.AllowMinusZero = false
 	opt.UnknownAsNull = false
 	return opt
@@ -97,9 +103,8 @@ func (e *hjsonEncoder) quote(value string, separator string, isRootObject bool)
 	if len(value) == 0 {
 		e.WriteString(separator + `""`)
 	} else if e.QuoteAlways ||
-		needsQuotes.MatchString(value) ||
-		startsWithNumber([]byte(value)) ||
-		startsWithKeyword.MatchString(value) {
+		needsQuotes.MatchString(value) || (e.QuoteAmbiguousStrings && (startsWithNumber([]byte(value)) ||
+		startsWithKeyword.MatchString(value))) {
 
 		// If the string contains no control characters, no quote characters, and no
 		// backslash characters, then we can safely slap some quotes around it.
@@ -178,6 +183,7 @@ func (s sortAlpha) Less(i, j int) bool {
 
 func (e *hjsonEncoder) writeIndent(indent int) {
 	e.WriteString(e.Eol)
+	e.WriteString(e.BaseIndentation)
 	for i := 0; i < indent; i++ {
 		e.WriteString(e.IndentBy)
 	}
@@ -207,8 +213,7 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 			e.WriteString("null")
 			return nil
 		}
-		value = value.Elem()
-		kind = value.Kind()
+		return e.str(value.Elem(),noIndent,separator,isRootObject)
 	}
 
 	if value.Type().Implements(marshaler) {
@@ -296,20 +301,25 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 		}
 
 		indent1 := e.indent
-		e.indent++
-		if !noIndent && !e.BracesSameLine {
-			e.writeIndent(indent1)
-		} else {
-			e.WriteString(separator)
+		if !isRootObject || e.EmitRootBraces {
+			if !noIndent && !e.BracesSameLine {
+				e.writeIndent(e.indent)
+			} else {
+				e.WriteString(separator)
+			}
+
+			e.indent++
+			e.WriteString("{")
 		}
-		e.WriteString("{")
 
 		keys := value.MapKeys()
 		sort.Sort(sortAlpha(keys))
 
 		// Join all of the member texts together, separated with newlines
 		for i := 0; i < len; i++ {
-			e.writeIndent(e.indent)
+			if i > 0 || !isRootObject || e.EmitRootBraces {
+				e.writeIndent(e.indent)
+			}
 			e.WriteString(e.quoteName(keys[i].String()))
 			e.WriteString(":")
 			if err := e.str(value.MapIndex(keys[i]), false, " ", false); err != nil {
@@ -317,8 +327,10 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 			}
 		}
 
-		e.writeIndent(indent1)
-		e.WriteString("}")
+		if !isRootObject || e.EmitRootBraces {
+			e.writeIndent(indent1)
+			e.WriteString("}")
+		}
 		e.indent = indent1
 
 	case reflect.Struct:
@@ -331,13 +343,16 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 		}
 
 		indent1 := e.indent
-		e.indent++
-		if !noIndent && !e.BracesSameLine {
-			e.writeIndent(indent1)
-		} else {
-			e.WriteString(separator)
+		if !isRootObject || e.EmitRootBraces {
+			if !noIndent && !e.BracesSameLine {
+				e.writeIndent(e.indent)
+			} else {
+				e.WriteString(separator)
+			}
+
+			e.indent++
+			e.WriteString("{")
 		}
-		e.WriteString("{")
 
 		// Join all of the member texts together, separated with newlines
 		for i := 0; i < l; i++ {
@@ -367,11 +382,15 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 			}
 			if len(jsonComment) > 0 {
 				for _, line := range strings.Split(jsonComment, e.Eol) {
-					e.writeIndent(e.indent)
+					if i > 0 || !isRootObject || e.EmitRootBraces {
+						e.writeIndent(e.indent)
+					}
 					e.WriteString(fmt.Sprintf("# %s", line))
 				}
 			}
-			e.writeIndent(e.indent)
+			if i > 0 || !isRootObject || e.EmitRootBraces {
+				e.writeIndent(e.indent)
+			}
 			e.WriteString(e.quoteName(name))
 			e.WriteString(":")
 			if err := e.str(curField, false, " ", false); err != nil {
@@ -382,8 +401,10 @@ func (e *hjsonEncoder) str(value reflect.Value, noIndent bool, separator string,
 			}
 		}
 
-		e.writeIndent(indent1)
-		e.WriteString("}")
+		if !isRootObject || e.EmitRootBraces {
+			e.writeIndent(indent1)
+			e.WriteString("}")
+		}
 
 		e.indent = indent1
 
@@ -457,10 +478,13 @@ func MarshalWithOptions(v interface{}, options EncoderOptions) ([]byte, error) {
 	e.indent = 0
 	e.Eol = options.Eol
 	e.BracesSameLine = options.BracesSameLine
+	e.EmitRootBraces = options.EmitRootBraces
 	e.QuoteAlways = options.QuoteAlways
+	e.QuoteAmbiguousStrings = options.QuoteAmbiguousStrings
 	e.IndentBy = options.IndentBy
+	e.BaseIndentation = options.BaseIndentation
 
-	err := e.str(reflect.ValueOf(v), true, "", true)
+	err := e.str(reflect.ValueOf(v), true, e.BaseIndentation, true)
 	if err != nil {
 		return nil, err
 	}

vendor/github.com/sirupsen/logrus/README.md

@@ -1,4 +1,4 @@
-# Logrus <img src="http://i.imgur.com/hTeVwmJ.png" width="40" height="40" alt=":walrus:" class="emoji" title=":walrus:"/> [![Build Status](https://travis-ci.org/sirupsen/logrus.svg?branch=master)](https://travis-ci.org/sirupsen/logrus) [![GoDoc](https://godoc.org/github.com/sirupsen/logrus?status.svg)](https://godoc.org/github.com/sirupsen/logrus)
+# Logrus <img src="http://i.imgur.com/hTeVwmJ.png" width="40" height="40" alt=":walrus:" class="emoji" title=":walrus:"/> [![Build Status](https://github.com/sirupsen/logrus/workflows/CI/badge.svg)](https://github.com/sirupsen/logrus/actions?query=workflow%3ACI) [![Build Status](https://travis-ci.org/sirupsen/logrus.svg?branch=master)](https://travis-ci.org/sirupsen/logrus) [![Go Reference](https://pkg.go.dev/badge/github.com/sirupsen/logrus.svg)](https://pkg.go.dev/github.com/sirupsen/logrus)
 
 Logrus is a structured logger for Go (golang), completely API compatible with
 the standard library logger.
@@ -9,7 +9,7 @@ the last thing you want from your Logging library (again...).
 
 This does not mean Logrus is dead. Logrus will continue to be maintained for
 security, (backwards compatible) bug fixes, and performance (where we are
-limited by the interface). 
+limited by the interface).
 
 I believe Logrus' biggest contribution is to have played a part in today's
 widespread use of structured logging in Golang. There doesn't seem to be a
@@ -43,7 +43,7 @@ plain text):
 With `log.SetFormatter(&log.JSONFormatter{})`, for easy parsing by logstash
 or Splunk:
 
-```json
+```text
 {"animal":"walrus","level":"info","msg":"A group of walrus emerges from the
 ocean","size":10,"time":"2014-03-10 19:57:38.562264131 -0400 EDT"}
 
@@ -99,7 +99,7 @@ time="2015-03-26T01:27:38-04:00" level=fatal method=github.com/sirupsen/arcticcr
 ```
 Note that this does add measurable overhead - the cost will depend on the version of Go, but is
 between 20 and 40% in recent tests with 1.6 and 1.7.  You can validate this in your
-environment via benchmarks: 
+environment via benchmarks:
 ```
 go test -bench=.*CallerTracing
 ```
@@ -317,6 +317,8 @@ log.SetLevel(log.InfoLevel)
 It may be useful to set `log.Level = logrus.DebugLevel` in a debug or verbose
 environment if your application has that.
 
+Note: If you want different log levels for global (`log.SetLevel(...)`) and syslog logging, please check the [syslog hook README](hooks/syslog/README.md#different-log-levels-for-local-and-remote-logging).
+
 #### Entries
 
 Besides the fields added with `WithField` or `WithFields` some fields are
@@ -341,7 +343,7 @@ import (
   log "github.com/sirupsen/logrus"
 )
 
-init() {
+func init() {
   // do something here to set environment depending on an environment variable
   // or command-line flag
   if Environment == "production" {

vendor/github.com/sirupsen/logrus/buffer_pool.go

@@ -26,15 +26,6 @@ func (p *defaultPool) Get() *bytes.Buffer {
 	return p.pool.Get().(*bytes.Buffer)
 }
 
-func getBuffer() *bytes.Buffer {
-	return bufferPool.Get()
-}
-
-func putBuffer(buf *bytes.Buffer) {
-	buf.Reset()
-	bufferPool.Put(buf)
-}
-
 // SetBufferPool allows to replace the default logrus buffer pool
 // to better meets the specific needs of an application.
 func SetBufferPool(bp BufferPool) {

vendor/github.com/sirupsen/logrus/entry.go

@@ -232,6 +232,7 @@ func (entry *Entry) log(level Level, msg string) {
 
 	newEntry.Logger.mu.Lock()
 	reportCaller := newEntry.Logger.ReportCaller
+	bufPool := newEntry.getBufferPool()
 	newEntry.Logger.mu.Unlock()
 
 	if reportCaller {
@@ -239,11 +240,11 @@ func (entry *Entry) log(level Level, msg string) {
 	}
 
 	newEntry.fireHooks()
-
-	buffer = getBuffer()
+	buffer = bufPool.Get()
 	defer func() {
 		newEntry.Buffer = nil
-		putBuffer(buffer)
+		buffer.Reset()
+		bufPool.Put(buffer)
 	}()
 	buffer.Reset()
 	newEntry.Buffer = buffer
@@ -260,6 +261,13 @@ func (entry *Entry) log(level Level, msg string) {
 	}
 }
 
+func (entry *Entry) getBufferPool() (pool BufferPool) {
+	if entry.Logger.BufferPool != nil {
+		return entry.Logger.BufferPool
+	}
+	return bufferPool
+}
+
 func (entry *Entry) fireHooks() {
 	var tmpHooks LevelHooks
 	entry.Logger.mu.Lock()
@@ -276,18 +284,21 @@ func (entry *Entry) fireHooks() {
 }
 
 func (entry *Entry) write() {
+	entry.Logger.mu.Lock()
+	defer entry.Logger.mu.Unlock()
 	serialized, err := entry.Logger.Formatter.Format(entry)
 	if err != nil {
 		fmt.Fprintf(os.Stderr, "Failed to obtain reader, %v\n", err)
 		return
 	}
-	entry.Logger.mu.Lock()
-	defer entry.Logger.mu.Unlock()
 	if _, err := entry.Logger.Out.Write(serialized); err != nil {
 		fmt.Fprintf(os.Stderr, "Failed to write to log, %v\n", err)
 	}
 }
 
+// Log will log a message at the level given as parameter.
+// Warning: using Log at Panic or Fatal level will not respectively Panic nor Exit.
+// For this behaviour Entry.Panic or Entry.Fatal should be used instead.
 func (entry *Entry) Log(level Level, args ...interface{}) {
 	if entry.Logger.IsLevelEnabled(level) {
 		entry.log(level, fmt.Sprint(args...))

vendor/github.com/sirupsen/logrus/logger.go

@@ -44,6 +44,9 @@ type Logger struct {
 	entryPool sync.Pool
 	// Function to exit the application, defaults to `os.Exit()`
 	ExitFunc exitFunc
+	// The buffer pool used to format the log. If it is nil, the default global
+	// buffer pool will be used.
+	BufferPool BufferPool
 }
 
 type exitFunc func(int)
@@ -192,6 +195,9 @@ func (logger *Logger) Panicf(format string, args ...interface{}) {
 	logger.Logf(PanicLevel, format, args...)
 }
 
+// Log will log a message at the level given as parameter.
+// Warning: using Log at Panic or Fatal level will not respectively Panic nor Exit.
+// For this behaviour Logger.Panic or Logger.Fatal should be used instead.
 func (logger *Logger) Log(level Level, args ...interface{}) {
 	if logger.IsLevelEnabled(level) {
 		entry := logger.newEntry()
@@ -402,3 +408,10 @@ func (logger *Logger) ReplaceHooks(hooks LevelHooks) LevelHooks {
 	logger.mu.Unlock()
 	return oldHooks
 }
+
+// SetBufferPool sets the logger buffer pool.
+func (logger *Logger) SetBufferPool(pool BufferPool) {
+	logger.mu.Lock()
+	defer logger.mu.Unlock()
+	logger.BufferPool = pool
+}

vendor/github.com/sirupsen/logrus/writer.go

@@ -4,6 +4,7 @@ import (
 	"bufio"
 	"io"
 	"runtime"
+	"strings"
 )
 
 // Writer at INFO level. See WriterLevel for details.
@@ -20,15 +21,18 @@ func (logger *Logger) WriterLevel(level Level) *io.PipeWriter {
 	return NewEntry(logger).WriterLevel(level)
 }
 
+// Writer returns an io.Writer that writes to the logger at the info log level
 func (entry *Entry) Writer() *io.PipeWriter {
 	return entry.WriterLevel(InfoLevel)
 }
 
+// WriterLevel returns an io.Writer that writes to the logger at the given log level
 func (entry *Entry) WriterLevel(level Level) *io.PipeWriter {
 	reader, writer := io.Pipe()
 
 	var printFunc func(args ...interface{})
 
+	// Determine which log function to use based on the specified log level
 	switch level {
 	case TraceLevel:
 		printFunc = entry.Trace
@@ -48,23 +52,51 @@ func (entry *Entry) WriterLevel(level Level) *io.PipeWriter {
 		printFunc = entry.Print
 	}
 
+	// Start a new goroutine to scan the input and write it to the logger using the specified print function.
+	// It splits the input into chunks of up to 64KB to avoid buffer overflows.
 	go entry.writerScanner(reader, printFunc)
+
+	// Set a finalizer function to close the writer when it is garbage collected
 	runtime.SetFinalizer(writer, writerFinalizer)
 
 	return writer
 }
 
+// writerScanner scans the input from the reader and writes it to the logger
 func (entry *Entry) writerScanner(reader *io.PipeReader, printFunc func(args ...interface{})) {
 	scanner := bufio.NewScanner(reader)
-	for scanner.Scan() {
-		printFunc(scanner.Text())
+
+	// Set the buffer size to the maximum token size to avoid buffer overflows
+	scanner.Buffer(make([]byte, bufio.MaxScanTokenSize), bufio.MaxScanTokenSize)
+
+	// Define a split function to split the input into chunks of up to 64KB
+	chunkSize := bufio.MaxScanTokenSize // 64KB
+	splitFunc := func(data []byte, atEOF bool) (int, []byte, error) {
+		if len(data) >= chunkSize {
+			return chunkSize, data[:chunkSize], nil
+		}
+
+		return bufio.ScanLines(data, atEOF)
 	}
+
+	// Use the custom split function to split the input
+	scanner.Split(splitFunc)
+
+	// Scan the input and write it to the logger using the specified print function
+	for scanner.Scan() {
+		printFunc(strings.TrimRight(scanner.Text(), "\r\n"))
+	}
+
+	// If there was an error while scanning the input, log an error
 	if err := scanner.Err(); err != nil {
 		entry.Errorf("Error while reading from Writer: %s", err)
 	}
+
+	// Close the reader when we are done
 	reader.Close()
 }
 
+// WriterFinalizer is a finalizer function that closes then given writer when it is garbage collected
 func writerFinalizer(writer *io.PipeWriter) {
 	writer.Close()
 }

vendor/golang.org/x/sys/AUTHORS

@@ -1,3 +0,0 @@
-# This source code refers to The Go Authors for copyright purposes.
-# The master list of authors is in the main Go distribution,
-# visible at http://tip.golang.org/AUTHORS.

vendor/golang.org/x/sys/CONTRIBUTORS

@@ -1,3 +0,0 @@
-# This source code was written by the Go contributors.
-# The master list of contributors is in the main Go distribution,
-# visible at http://tip.golang.org/CONTRIBUTORS.

vendor/golang.org/x/sys/LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2009 The Go Authors. All rights reserved.
+Copyright 2009 The Go Authors.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are
@@ -10,7 +10,7 @@ notice, this list of conditions and the following disclaimer.
 copyright notice, this list of conditions and the following disclaimer
 in the documentation and/or other materials provided with the
 distribution.
-   * Neither the name of Google Inc. nor the names of its
+   * Neither the name of Google LLC nor the names of its
 contributors may be used to endorse or promote products derived from
 this software without specific prior written permission.
 

vendor/golang.org/x/sys/internal/unsafeheader/unsafeheader.go

@@ -1,30 +0,0 @@
-// Copyright 2020 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// Package unsafeheader contains header declarations for the Go runtime's
-// slice and string implementations.
-//
-// This package allows x/sys to use types equivalent to
-// reflect.SliceHeader and reflect.StringHeader without introducing
-// a dependency on the (relatively heavy) "reflect" package.
-package unsafeheader
-
-import (
-	"unsafe"
-)
-
-// Slice is the runtime representation of a slice.
-// It cannot be used safely or portably and its representation may change in a later release.
-type Slice struct {
-	Data unsafe.Pointer
-	Len  int
-	Cap  int
-}
-
-// String is the runtime representation of a string.
-// It cannot be used safely or portably and its representation may change in a later release.
-type String struct {
-	Data unsafe.Pointer
-	Len  int
-}

vendor/golang.org/x/sys/unix/aliases.go

@@ -2,9 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build (aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos) && go1.9
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris zos
-// +build go1.9
+//go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
 
 package unix
 

vendor/golang.org/x/sys/unix/asm_aix_ppc64.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_bsd_386.s

@@ -3,8 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build (freebsd || netbsd || openbsd) && gc
-// +build freebsd netbsd openbsd
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_bsd_amd64.s

@@ -3,8 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build (darwin || dragonfly || freebsd || netbsd || openbsd) && gc
-// +build darwin dragonfly freebsd netbsd openbsd
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_bsd_arm.s

@@ -3,8 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build (freebsd || netbsd || openbsd) && gc
-// +build freebsd netbsd openbsd
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_bsd_arm64.s

@@ -3,8 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build (darwin || freebsd || netbsd || openbsd) && gc
-// +build darwin freebsd netbsd openbsd
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_bsd_ppc64.s

@@ -0,0 +1,29 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (darwin || freebsd || netbsd || openbsd) && gc
+
+#include "textflag.h"
+
+//
+// System call support for ppc64, BSD
+//
+
+// Just jump to package syscall's implementation for all these functions.
+// The runtime may know about them.
+
+TEXT	·Syscall(SB),NOSPLIT,$0-56
+	JMP	syscall·Syscall(SB)
+
+TEXT	·Syscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·Syscall6(SB)
+
+TEXT	·Syscall9(SB),NOSPLIT,$0-104
+	JMP	syscall·Syscall9(SB)
+
+TEXT	·RawSyscall(SB),NOSPLIT,$0-56
+	JMP	syscall·RawSyscall(SB)
+
+TEXT	·RawSyscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·RawSyscall6(SB)

vendor/golang.org/x/sys/unix/asm_bsd_riscv64.s

@@ -0,0 +1,27 @@
+// Copyright 2021 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (darwin || freebsd || netbsd || openbsd) && gc
+
+#include "textflag.h"
+
+// System call support for RISCV64 BSD
+
+// Just jump to package syscall's implementation for all these functions.
+// The runtime may know about them.
+
+TEXT	·Syscall(SB),NOSPLIT,$0-56
+	JMP	syscall·Syscall(SB)
+
+TEXT	·Syscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·Syscall6(SB)
+
+TEXT	·Syscall9(SB),NOSPLIT,$0-104
+	JMP	syscall·Syscall9(SB)
+
+TEXT	·RawSyscall(SB),NOSPLIT,$0-56
+	JMP	syscall·RawSyscall(SB)
+
+TEXT	·RawSyscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·RawSyscall6(SB)

vendor/golang.org/x/sys/unix/asm_linux_386.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_amd64.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_arm.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_arm64.s

@@ -3,9 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux && arm64 && gc
-// +build linux
-// +build arm64
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_loong64.s

@@ -0,0 +1,51 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build linux && loong64 && gc
+
+#include "textflag.h"
+
+
+// Just jump to package syscall's implementation for all these functions.
+// The runtime may know about them.
+
+TEXT ·Syscall(SB),NOSPLIT,$0-56
+	JMP	syscall·Syscall(SB)
+
+TEXT ·Syscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·Syscall6(SB)
+
+TEXT ·SyscallNoError(SB),NOSPLIT,$0-48
+	JAL	runtime·entersyscall(SB)
+	MOVV	a1+8(FP), R4
+	MOVV	a2+16(FP), R5
+	MOVV	a3+24(FP), R6
+	MOVV	R0, R7
+	MOVV	R0, R8
+	MOVV	R0, R9
+	MOVV	trap+0(FP), R11	// syscall entry
+	SYSCALL
+	MOVV	R4, r1+32(FP)
+	MOVV	R0, r2+40(FP)	// r2 is not used. Always set to 0
+	JAL	runtime·exitsyscall(SB)
+	RET
+
+TEXT ·RawSyscall(SB),NOSPLIT,$0-56
+	JMP	syscall·RawSyscall(SB)
+
+TEXT ·RawSyscall6(SB),NOSPLIT,$0-80
+	JMP	syscall·RawSyscall6(SB)
+
+TEXT ·RawSyscallNoError(SB),NOSPLIT,$0-48
+	MOVV	a1+8(FP), R4
+	MOVV	a2+16(FP), R5
+	MOVV	a3+24(FP), R6
+	MOVV	R0, R7
+	MOVV	R0, R8
+	MOVV	R0, R9
+	MOVV	trap+0(FP), R11	// syscall entry
+	SYSCALL
+	MOVV	R4, r1+32(FP)
+	MOVV	R0, r2+40(FP)	// r2 is not used. Always set to 0
+	RET

vendor/golang.org/x/sys/unix/asm_linux_mips64x.s

@@ -3,9 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux && (mips64 || mips64le) && gc
-// +build linux
-// +build mips64 mips64le
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_mipsx.s

@@ -3,9 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux && (mips || mipsle) && gc
-// +build linux
-// +build mips mipsle
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_ppc64x.s

@@ -3,9 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux && (ppc64 || ppc64le) && gc
-// +build linux
-// +build ppc64 ppc64le
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_riscv64.s

@@ -3,8 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build riscv64 && gc
-// +build riscv64
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_linux_s390x.s

@@ -3,9 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux && s390x && gc
-// +build linux
-// +build s390x
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_openbsd_mips64.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_solaris_amd64.s

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gc
-// +build gc
 
 #include "textflag.h"
 

vendor/golang.org/x/sys/unix/asm_zos_s390x.s

@@ -3,18 +3,17 @@
 // license that can be found in the LICENSE file.
 
 //go:build zos && s390x && gc
-// +build zos
-// +build s390x
-// +build gc
 
 #include "textflag.h"
 
 #define PSALAA            1208(R0)
 #define GTAB64(x)           80(x)
 #define LCA64(x)            88(x)
+#define SAVSTACK_ASYNC(x)  336(x) // in the LCA
 #define CAA(x)               8(x)
-#define EDCHPXV(x)        1016(x)       // in the CAA
-#define SAVSTACK_ASYNC(x)  336(x)       // in the LCA
+#define CEECAATHDID(x)     976(x) // in the CAA
+#define EDCHPXV(x)        1016(x) // in the CAA
+#define GOCB(x)           1104(x) // in the CAA
 
 // SS_*, where x=SAVSTACK_ASYNC
 #define SS_LE(x)             0(x)
@@ -22,394 +21,125 @@
 #define SS_ERRNO(x)         16(x)
 #define SS_ERRNOJR(x)       20(x)
 
-#define LE_CALL BYTE $0x0D; BYTE $0x76; // BL R7, R6
+// Function Descriptor Offsets
+#define __errno  0x156*16
+#define __err2ad 0x16C*16
 
-TEXT ·clearErrno(SB),NOSPLIT,$0-0
-	BL	addrerrno<>(SB)
-	MOVD	$0, 0(R3)
+// Call Instructions
+#define LE_CALL    BYTE $0x0D; BYTE $0x76 // BL R7, R6
+#define SVC_LOAD   BYTE $0x0A; BYTE $0x08 // SVC 08 LOAD
+#define SVC_DELETE BYTE $0x0A; BYTE $0x09 // SVC 09 DELETE
+
+DATA zosLibVec<>(SB)/8, $0
+GLOBL zosLibVec<>(SB), NOPTR, $8
+
+TEXT ·initZosLibVec(SB), NOSPLIT|NOFRAME, $0-0
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
+	MOVD CAA(R8), R8
+	MOVD EDCHPXV(R8), R8
+	MOVD R8, zosLibVec<>(SB)
+	RET
+
+TEXT ·GetZosLibVec(SB), NOSPLIT|NOFRAME, $0-0
+	MOVD zosLibVec<>(SB), R8
+	MOVD R8, ret+0(FP)
+	RET
+
+TEXT ·clearErrno(SB), NOSPLIT, $0-0
+	BL   addrerrno<>(SB)
+	MOVD $0, 0(R3)
 	RET
 
 // Returns the address of errno in R3.
-TEXT addrerrno<>(SB),NOSPLIT|NOFRAME,$0-0
+TEXT addrerrno<>(SB), NOSPLIT|NOFRAME, $0-0
 	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
 
 	// Get __errno FuncDesc.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	ADD	$(0x156*16), R9
-	LMG	0(R9), R5, R6
+	MOVD CAA(R8), R9
+	MOVD EDCHPXV(R9), R9
+	ADD  $(__errno), R9
+	LMG  0(R9), R5, R6
 
 	// Switch to saved LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
+	MOVD SAVSTACK_ASYNC(R8), R9
+	MOVD 0(R9), R4
+	MOVD $0, 0(R9)
 
 	// Call __errno function.
 	LE_CALL
 	NOPH
 
 	// Switch back to Go stack.
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-	RET
-
-TEXT ·syscall_syscall(SB),NOSPLIT,$0-56
-	BL	runtime·entersyscall(SB)
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+32(FP)
-	MOVD	R0, r2+40(FP)
-	MOVD	R0, err+48(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	addrerrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+48(FP)
-done:
-	BL	runtime·exitsyscall(SB)
-	RET
-
-TEXT ·syscall_rawsyscall(SB),NOSPLIT,$0-56
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+32(FP)
-	MOVD	R0, r2+40(FP)
-	MOVD	R0, err+48(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	addrerrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+48(FP)
-done:
-	RET
-
-TEXT ·syscall_syscall6(SB),NOSPLIT,$0-80
-	BL	runtime·entersyscall(SB)
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Fill in parameter list.
-	MOVD	a4+32(FP), R12
-	MOVD	R12, (2176+24)(R4)
-	MOVD	a5+40(FP), R12
-	MOVD	R12, (2176+32)(R4)
-	MOVD	a6+48(FP), R12
-	MOVD	R12, (2176+40)(R4)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+56(FP)
-	MOVD	R0, r2+64(FP)
-	MOVD	R0, err+72(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	addrerrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+72(FP)
-done:
-	BL	runtime·exitsyscall(SB)
-	RET
-
-TEXT ·syscall_rawsyscall6(SB),NOSPLIT,$0-80
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Fill in parameter list.
-	MOVD	a4+32(FP), R12
-	MOVD	R12, (2176+24)(R4)
-	MOVD	a5+40(FP), R12
-	MOVD	R12, (2176+32)(R4)
-	MOVD	a6+48(FP), R12
-	MOVD	R12, (2176+40)(R4)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+56(FP)
-	MOVD	R0, r2+64(FP)
-	MOVD	R0, err+72(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	·rrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+72(FP)
-done:
-	RET
-
-TEXT ·syscall_syscall9(SB),NOSPLIT,$0
-	BL	runtime·entersyscall(SB)
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Fill in parameter list.
-	MOVD	a4+32(FP), R12
-	MOVD	R12, (2176+24)(R4)
-	MOVD	a5+40(FP), R12
-	MOVD	R12, (2176+32)(R4)
-	MOVD	a6+48(FP), R12
-	MOVD	R12, (2176+40)(R4)
-	MOVD	a7+56(FP), R12
-	MOVD	R12, (2176+48)(R4)
-	MOVD	a8+64(FP), R12
-	MOVD	R12, (2176+56)(R4)
-	MOVD	a9+72(FP), R12
-	MOVD	R12, (2176+64)(R4)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+80(FP)
-	MOVD	R0, r2+88(FP)
-	MOVD	R0, err+96(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	addrerrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+96(FP)
-done:
-        BL	runtime·exitsyscall(SB)
-        RET
-
-TEXT ·syscall_rawsyscall9(SB),NOSPLIT,$0
-	MOVD	a1+8(FP), R1
-	MOVD	a2+16(FP), R2
-	MOVD	a3+24(FP), R3
-
-	// Get library control area (LCA).
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-
-	// Get function.
-	MOVD	CAA(R8), R9
-	MOVD	EDCHPXV(R9), R9
-	MOVD	trap+0(FP), R5
-	SLD	$4, R5
-	ADD	R5, R9
-	LMG	0(R9), R5, R6
-
-	// Restore LE stack.
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R4
-	MOVD	$0, 0(R9)
-
-	// Fill in parameter list.
-	MOVD	a4+32(FP), R12
-	MOVD	R12, (2176+24)(R4)
-	MOVD	a5+40(FP), R12
-	MOVD	R12, (2176+32)(R4)
-	MOVD	a6+48(FP), R12
-	MOVD	R12, (2176+40)(R4)
-	MOVD	a7+56(FP), R12
-	MOVD	R12, (2176+48)(R4)
-	MOVD	a8+64(FP), R12
-	MOVD	R12, (2176+56)(R4)
-	MOVD	a9+72(FP), R12
-	MOVD	R12, (2176+64)(R4)
-
-	// Call function.
-	LE_CALL
-	NOPH
-	XOR	R0, R0      // Restore R0 to $0.
-	MOVD	R4, 0(R9)   // Save stack pointer.
-
-	MOVD	R3, r1+80(FP)
-	MOVD	R0, r2+88(FP)
-	MOVD	R0, err+96(FP)
-	MOVW	R3, R4
-	CMP	R4, $-1
-	BNE	done
-	BL	addrerrno<>(SB)
-	MOVWZ	0(R3), R3
-	MOVD	R3, err+96(FP)
-done:
+	XOR  R0, R0    // Restore R0 to $0.
+	MOVD R4, 0(R9) // Save stack pointer.
 	RET
 
 // func svcCall(fnptr unsafe.Pointer, argv *unsafe.Pointer, dsa *uint64)
-TEXT ·svcCall(SB),NOSPLIT,$0
-	BL	runtime·save_g(SB)   // Save g and stack pointer
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	R15, 0(R9)
+TEXT ·svcCall(SB), NOSPLIT, $0
+	BL   runtime·save_g(SB)     // Save g and stack pointer
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
+	MOVD SAVSTACK_ASYNC(R8), R9
+	MOVD R15, 0(R9)
 
-	MOVD	argv+8(FP), R1       // Move function arguments into registers
-	MOVD	dsa+16(FP), g
-	MOVD	fnptr+0(FP), R15
+	MOVD argv+8(FP), R1   // Move function arguments into registers
+	MOVD dsa+16(FP), g
+	MOVD fnptr+0(FP), R15
 
-	BYTE	$0x0D                // Branch to function
-	BYTE	$0xEF
+	BYTE $0x0D // Branch to function
+	BYTE $0xEF
 
-	BL	runtime·load_g(SB)   // Restore g and stack pointer
-	MOVW	PSALAA, R8
-	MOVD	LCA64(R8), R8
-	MOVD	SAVSTACK_ASYNC(R8), R9
-	MOVD	0(R9), R15
+	BL   runtime·load_g(SB)     // Restore g and stack pointer
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
+	MOVD SAVSTACK_ASYNC(R8), R9
+	MOVD 0(R9), R15
 
 	RET
 
 // func svcLoad(name *byte) unsafe.Pointer
-TEXT ·svcLoad(SB),NOSPLIT,$0
-	MOVD	R15, R2          // Save go stack pointer
-	MOVD	name+0(FP), R0   // Move SVC args into registers
-	MOVD	$0x80000000, R1
-	MOVD	$0, R15
-	BYTE	$0x0A            // SVC 08 LOAD
-	BYTE	$0x08
-	MOVW	R15, R3          // Save return code from SVC
-	MOVD	R2, R15          // Restore go stack pointer
-	CMP	R3, $0           // Check SVC return code
-	BNE	error
+TEXT ·svcLoad(SB), NOSPLIT, $0
+	MOVD R15, R2         // Save go stack pointer
+	MOVD name+0(FP), R0  // Move SVC args into registers
+	MOVD $0x80000000, R1
+	MOVD $0, R15
+	SVC_LOAD
+	MOVW R15, R3         // Save return code from SVC
+	MOVD R2, R15         // Restore go stack pointer
+	CMP  R3, $0          // Check SVC return code
+	BNE  error
 
-	MOVD	$-2, R3          // Reset last bit of entry point to zero
-	AND	R0, R3
-	MOVD	R3, addr+8(FP)   // Return entry point returned by SVC
-	CMP	R0, R3           // Check if last bit of entry point was set
-	BNE	done
+	MOVD $-2, R3       // Reset last bit of entry point to zero
+	AND  R0, R3
+	MOVD R3, ret+8(FP) // Return entry point returned by SVC
+	CMP  R0, R3        // Check if last bit of entry point was set
+	BNE  done
 
-	MOVD	R15, R2          // Save go stack pointer
-	MOVD	$0, R15          // Move SVC args into registers (entry point still in r0 from SVC 08)
-	BYTE	$0x0A            // SVC 09 DELETE
-	BYTE	$0x09
-	MOVD	R2, R15          // Restore go stack pointer
+	MOVD R15, R2 // Save go stack pointer
+	MOVD $0, R15 // Move SVC args into registers (entry point still in r0 from SVC 08)
+	SVC_DELETE
+	MOVD R2, R15 // Restore go stack pointer
 
 error:
-	MOVD	$0, addr+8(FP)   // Return 0 on failure
+	MOVD $0, ret+8(FP) // Return 0 on failure
+
 done:
-	XOR	R0, R0           // Reset r0 to 0
+	XOR R0, R0 // Reset r0 to 0
 	RET
 
 // func svcUnload(name *byte, fnptr unsafe.Pointer) int64
-TEXT ·svcUnload(SB),NOSPLIT,$0
-	MOVD	R15, R2          // Save go stack pointer
-	MOVD	name+0(FP), R0   // Move SVC args into registers
-	MOVD	addr+8(FP), R15
-	BYTE	$0x0A            // SVC 09
-	BYTE	$0x09
-	XOR	R0, R0           // Reset r0 to 0
-	MOVD	R15, R1          // Save SVC return code
-	MOVD	R2, R15          // Restore go stack pointer
-	MOVD	R1, rc+0(FP)     // Return SVC return code
+TEXT ·svcUnload(SB), NOSPLIT, $0
+	MOVD R15, R2          // Save go stack pointer
+	MOVD name+0(FP), R0   // Move SVC args into registers
+	MOVD fnptr+8(FP), R15
+	SVC_DELETE
+	XOR  R0, R0           // Reset r0 to 0
+	MOVD R15, R1          // Save SVC return code
+	MOVD R2, R15          // Restore go stack pointer
+	MOVD R1, ret+16(FP)   // Return SVC return code
 	RET
 
 // func gettid() uint64
@@ -420,7 +150,233 @@ TEXT ·gettid(SB), NOSPLIT, $0
 
 	// Get CEECAATHDID
 	MOVD CAA(R8), R9
-	MOVD 0x3D0(R9), R9
+	MOVD CEECAATHDID(R9), R9
 	MOVD R9, ret+0(FP)
 
 	RET
+
+//
+// Call LE function, if the return is -1
+// errno and errno2 is retrieved
+//
+TEXT ·CallLeFuncWithErr(SB), NOSPLIT, $0
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
+	MOVD CAA(R8), R9
+	MOVD g, GOCB(R9)
+
+	// Restore LE stack.
+	MOVD SAVSTACK_ASYNC(R8), R9 // R9-> LE stack frame saving address
+	MOVD 0(R9), R4              // R4-> restore previously saved stack frame pointer
+
+	MOVD parms_base+8(FP), R7 // R7 -> argument array
+	MOVD parms_len+16(FP), R8 // R8 number of arguments
+
+	//  arg 1 ---> R1
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	MOVD 0(R7), R1
+
+	//  arg 2 ---> R2
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	ADD  $8, R7
+	MOVD 0(R7), R2
+
+	//  arg 3 --> R3
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	ADD  $8, R7
+	MOVD 0(R7), R3
+
+	CMP  R8, $0
+	BEQ  docall
+	MOVD $2176+16, R6 // starting LE stack address-8 to store 4th argument
+
+repeat:
+	ADD  $8, R7
+	MOVD 0(R7), R0      // advance arg pointer by 8 byte
+	ADD  $8, R6         // advance LE argument address by 8 byte
+	MOVD R0, (R4)(R6*1) // copy argument from go-slice to le-frame
+	SUB  $1, R8
+	CMP  R8, $0
+	BNE  repeat
+
+docall:
+	MOVD funcdesc+0(FP), R8 // R8-> function descriptor
+	LMG  0(R8), R5, R6
+	MOVD $0, 0(R9)          // R9 address of SAVSTACK_ASYNC
+	LE_CALL                 // balr R7, R6 (return #1)
+	NOPH
+	MOVD R3, ret+32(FP)
+	CMP  R3, $-1            // compare result to -1
+	BNE  done
+
+	// retrieve errno and errno2
+	MOVD  zosLibVec<>(SB), R8
+	ADD   $(__errno), R8
+	LMG   0(R8), R5, R6
+	LE_CALL                   // balr R7, R6 __errno (return #3)
+	NOPH
+	MOVWZ 0(R3), R3
+	MOVD  R3, err+48(FP)
+	MOVD  zosLibVec<>(SB), R8
+	ADD   $(__err2ad), R8
+	LMG   0(R8), R5, R6
+	LE_CALL                   // balr R7, R6 __err2ad (return #2)
+	NOPH
+	MOVW  (R3), R2            // retrieve errno2
+	MOVD  R2, errno2+40(FP)   // store in return area
+
+done:
+	MOVD R4, 0(R9)            // Save stack pointer.
+	RET
+
+//
+// Call LE function, if the return is 0
+// errno and errno2 is retrieved
+//
+TEXT ·CallLeFuncWithPtrReturn(SB), NOSPLIT, $0
+	MOVW PSALAA, R8
+	MOVD LCA64(R8), R8
+	MOVD CAA(R8), R9
+	MOVD g, GOCB(R9)
+
+	// Restore LE stack.
+	MOVD SAVSTACK_ASYNC(R8), R9 // R9-> LE stack frame saving address
+	MOVD 0(R9), R4              // R4-> restore previously saved stack frame pointer
+
+	MOVD parms_base+8(FP), R7 // R7 -> argument array
+	MOVD parms_len+16(FP), R8 // R8 number of arguments
+
+	//  arg 1 ---> R1
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	MOVD 0(R7), R1
+
+	//  arg 2 ---> R2
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	ADD  $8, R7
+	MOVD 0(R7), R2
+
+	//  arg 3 --> R3
+	CMP  R8, $0
+	BEQ  docall
+	SUB  $1, R8
+	ADD  $8, R7
+	MOVD 0(R7), R3
+
+	CMP  R8, $0
+	BEQ  docall
+	MOVD $2176+16, R6 // starting LE stack address-8 to store 4th argument
+
+repeat:
+	ADD  $8, R7
+	MOVD 0(R7), R0      // advance arg pointer by 8 byte
+	ADD  $8, R6         // advance LE argument address by 8 byte
+	MOVD R0, (R4)(R6*1) // copy argument from go-slice to le-frame
+	SUB  $1, R8
+	CMP  R8, $0
+	BNE  repeat
+
+docall:
+	MOVD funcdesc+0(FP), R8 // R8-> function descriptor
+	LMG  0(R8), R5, R6
+	MOVD $0, 0(R9)          // R9 address of SAVSTACK_ASYNC
+	LE_CALL                 // balr R7, R6 (return #1)
+	NOPH
+	MOVD R3, ret+32(FP)
+	CMP  R3, $0             // compare result to 0
+	BNE  done
+
+	// retrieve errno and errno2
+	MOVD  zosLibVec<>(SB), R8
+	ADD   $(__errno), R8
+	LMG   0(R8), R5, R6
+	LE_CALL                   // balr R7, R6 __errno (return #3)
+	NOPH
+	MOVWZ 0(R3), R3
+	MOVD  R3, err+48(FP)
+	MOVD  zosLibVec<>(SB), R8
+	ADD   $(__err2ad), R8
+	LMG   0(R8), R5, R6
+	LE_CALL                   // balr R7, R6 __err2ad (return #2)
+	NOPH
+	MOVW  (R3), R2            // retrieve errno2
+	MOVD  R2, errno2+40(FP)   // store in return area
+	XOR   R2, R2
+	MOVWZ R2, (R3)            // clear errno2
+
+done:
+	MOVD R4, 0(R9)            // Save stack pointer.
+	RET
+
+//
+// function to test if a pointer can be safely dereferenced (content read)
+// return 0 for succces
+//
+TEXT ·ptrtest(SB), NOSPLIT, $0-16
+	MOVD arg+0(FP), R10 // test pointer in R10
+
+	// set up R2 to point to CEECAADMC
+	BYTE $0xE3; BYTE $0x20; BYTE $0x04; BYTE $0xB8; BYTE $0x00; BYTE $0x17 // llgt  2,1208
+	BYTE $0xB9; BYTE $0x17; BYTE $0x00; BYTE $0x22                         // llgtr 2,2
+	BYTE $0xA5; BYTE $0x26; BYTE $0x7F; BYTE $0xFF                         // nilh  2,32767
+	BYTE $0xE3; BYTE $0x22; BYTE $0x00; BYTE $0x58; BYTE $0x00; BYTE $0x04 // lg    2,88(2)
+	BYTE $0xE3; BYTE $0x22; BYTE $0x00; BYTE $0x08; BYTE $0x00; BYTE $0x04 // lg    2,8(2)
+	BYTE $0x41; BYTE $0x22; BYTE $0x03; BYTE $0x68                         // la    2,872(2)
+
+	// set up R5 to point to the "shunt" path which set 1 to R3 (failure)
+	BYTE $0xB9; BYTE $0x82; BYTE $0x00; BYTE $0x33 // xgr   3,3
+	BYTE $0xA7; BYTE $0x55; BYTE $0x00; BYTE $0x04 // bras  5,lbl1
+	BYTE $0xA7; BYTE $0x39; BYTE $0x00; BYTE $0x01 // lghi  3,1
+
+	// if r3 is not zero (failed) then branch to finish
+	BYTE $0xB9; BYTE $0x02; BYTE $0x00; BYTE $0x33 // lbl1     ltgr  3,3
+	BYTE $0xA7; BYTE $0x74; BYTE $0x00; BYTE $0x08 // brc   b'0111',lbl2
+
+	// stomic store shunt address in R5 into CEECAADMC
+	BYTE $0xE3; BYTE $0x52; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x24 // stg   5,0(2)
+
+	// now try reading from the test pointer in R10, if it fails it branches to the "lghi" instruction above
+	BYTE $0xE3; BYTE $0x9A; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x04 // lg    9,0(10)
+
+	// finish here, restore 0 into CEECAADMC
+	BYTE $0xB9; BYTE $0x82; BYTE $0x00; BYTE $0x99                         // lbl2     xgr   9,9
+	BYTE $0xE3; BYTE $0x92; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x24 // stg   9,0(2)
+	MOVD R3, ret+8(FP)                                                     // result in R3
+	RET
+
+//
+// function to test if a untptr can be loaded from a pointer
+// return 1: the 8-byte content
+//        2: 0 for success, 1 for failure
+//
+// func safeload(ptr uintptr) ( value uintptr, error uintptr)
+TEXT ·safeload(SB), NOSPLIT, $0-24
+	MOVD ptr+0(FP), R10                                                    // test pointer in R10
+	MOVD $0x0, R6
+	BYTE $0xE3; BYTE $0x20; BYTE $0x04; BYTE $0xB8; BYTE $0x00; BYTE $0x17 // llgt  2,1208
+	BYTE $0xB9; BYTE $0x17; BYTE $0x00; BYTE $0x22                         // llgtr 2,2
+	BYTE $0xA5; BYTE $0x26; BYTE $0x7F; BYTE $0xFF                         // nilh  2,32767
+	BYTE $0xE3; BYTE $0x22; BYTE $0x00; BYTE $0x58; BYTE $0x00; BYTE $0x04 // lg    2,88(2)
+	BYTE $0xE3; BYTE $0x22; BYTE $0x00; BYTE $0x08; BYTE $0x00; BYTE $0x04 // lg    2,8(2)
+	BYTE $0x41; BYTE $0x22; BYTE $0x03; BYTE $0x68                         // la    2,872(2)
+	BYTE $0xB9; BYTE $0x82; BYTE $0x00; BYTE $0x33                         // xgr   3,3
+	BYTE $0xA7; BYTE $0x55; BYTE $0x00; BYTE $0x04                         // bras  5,lbl1
+	BYTE $0xA7; BYTE $0x39; BYTE $0x00; BYTE $0x01                         // lghi  3,1
+	BYTE $0xB9; BYTE $0x02; BYTE $0x00; BYTE $0x33                         // lbl1     ltgr  3,3
+	BYTE $0xA7; BYTE $0x74; BYTE $0x00; BYTE $0x08                         // brc   b'0111',lbl2
+	BYTE $0xE3; BYTE $0x52; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x24 // stg 5,0(2)
+	BYTE $0xE3; BYTE $0x6A; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x04 // lg    6,0(10)
+	BYTE $0xB9; BYTE $0x82; BYTE $0x00; BYTE $0x99                         // lbl2     xgr   9,9
+	BYTE $0xE3; BYTE $0x92; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x24 // stg   9,0(2)
+	MOVD R6, value+8(FP)                                                   // result in R6
+	MOVD R3, error+16(FP)                                                  // error in R3
+	RET

vendor/golang.org/x/sys/unix/bpxsvc_zos.go

@@ -0,0 +1,657 @@
+// Copyright 2024 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build zos
+
+package unix
+
+import (
+	"bytes"
+	"fmt"
+	"unsafe"
+)
+
+//go:noescape
+func bpxcall(plist []unsafe.Pointer, bpx_offset int64)
+
+//go:noescape
+func A2e([]byte)
+
+//go:noescape
+func E2a([]byte)
+
+const (
+	BPX4STA = 192  // stat
+	BPX4FST = 104  // fstat
+	BPX4LST = 132  // lstat
+	BPX4OPN = 156  // open
+	BPX4CLO = 72   // close
+	BPX4CHR = 500  // chattr
+	BPX4FCR = 504  // fchattr
+	BPX4LCR = 1180 // lchattr
+	BPX4CTW = 492  // cond_timed_wait
+	BPX4GTH = 1056 // __getthent
+	BPX4PTQ = 412  // pthread_quiesc
+	BPX4PTR = 320  // ptrace
+)
+
+const (
+	//options
+	//byte1
+	BPX_OPNFHIGH = 0x80
+	//byte2
+	BPX_OPNFEXEC = 0x80
+	//byte3
+	BPX_O_NOLARGEFILE = 0x08
+	BPX_O_LARGEFILE   = 0x04
+	BPX_O_ASYNCSIG    = 0x02
+	BPX_O_SYNC        = 0x01
+	//byte4
+	BPX_O_CREXCL   = 0xc0
+	BPX_O_CREAT    = 0x80
+	BPX_O_EXCL     = 0x40
+	BPX_O_NOCTTY   = 0x20
+	BPX_O_TRUNC    = 0x10
+	BPX_O_APPEND   = 0x08
+	BPX_O_NONBLOCK = 0x04
+	BPX_FNDELAY    = 0x04
+	BPX_O_RDWR     = 0x03
+	BPX_O_RDONLY   = 0x02
+	BPX_O_WRONLY   = 0x01
+	BPX_O_ACCMODE  = 0x03
+	BPX_O_GETFL    = 0x0f
+
+	//mode
+	// byte1 (file type)
+	BPX_FT_DIR      = 1
+	BPX_FT_CHARSPEC = 2
+	BPX_FT_REGFILE  = 3
+	BPX_FT_FIFO     = 4
+	BPX_FT_SYMLINK  = 5
+	BPX_FT_SOCKET   = 6
+	//byte3
+	BPX_S_ISUID  = 0x08
+	BPX_S_ISGID  = 0x04
+	BPX_S_ISVTX  = 0x02
+	BPX_S_IRWXU1 = 0x01
+	BPX_S_IRUSR  = 0x01
+	//byte4
+	BPX_S_IRWXU2 = 0xc0
+	BPX_S_IWUSR  = 0x80
+	BPX_S_IXUSR  = 0x40
+	BPX_S_IRWXG  = 0x38
+	BPX_S_IRGRP  = 0x20
+	BPX_S_IWGRP  = 0x10
+	BPX_S_IXGRP  = 0x08
+	BPX_S_IRWXOX = 0x07
+	BPX_S_IROTH  = 0x04
+	BPX_S_IWOTH  = 0x02
+	BPX_S_IXOTH  = 0x01
+
+	CW_INTRPT  = 1
+	CW_CONDVAR = 32
+	CW_TIMEOUT = 64
+
+	PGTHA_NEXT        = 2
+	PGTHA_CURRENT     = 1
+	PGTHA_FIRST       = 0
+	PGTHA_LAST        = 3
+	PGTHA_PROCESS     = 0x80
+	PGTHA_CONTTY      = 0x40
+	PGTHA_PATH        = 0x20
+	PGTHA_COMMAND     = 0x10
+	PGTHA_FILEDATA    = 0x08
+	PGTHA_THREAD      = 0x04
+	PGTHA_PTAG        = 0x02
+	PGTHA_COMMANDLONG = 0x01
+	PGTHA_THREADFAST  = 0x80
+	PGTHA_FILEPATH    = 0x40
+	PGTHA_THDSIGMASK  = 0x20
+	// thread quiece mode
+	QUIESCE_TERM       int32 = 1
+	QUIESCE_FORCE      int32 = 2
+	QUIESCE_QUERY      int32 = 3
+	QUIESCE_FREEZE     int32 = 4
+	QUIESCE_UNFREEZE   int32 = 5
+	FREEZE_THIS_THREAD int32 = 6
+	FREEZE_EXIT        int32 = 8
+	QUIESCE_SRB        int32 = 9
+)
+
+type Pgtha struct {
+	Pid        uint32 // 0
+	Tid0       uint32 // 4
+	Tid1       uint32
+	Accesspid  byte    // C
+	Accesstid  byte    // D
+	Accessasid uint16  // E
+	Loginname  [8]byte // 10
+	Flag1      byte    // 18
+	Flag1b2    byte    // 19
+}
+
+type Bpxystat_t struct { // DSECT BPXYSTAT
+	St_id           [4]uint8  // 0
+	St_length       uint16    // 0x4
+	St_version      uint16    // 0x6
+	St_mode         uint32    // 0x8
+	St_ino          uint32    // 0xc
+	St_dev          uint32    // 0x10
+	St_nlink        uint32    // 0x14
+	St_uid          uint32    // 0x18
+	St_gid          uint32    // 0x1c
+	St_size         uint64    // 0x20
+	St_atime        uint32    // 0x28
+	St_mtime        uint32    // 0x2c
+	St_ctime        uint32    // 0x30
+	St_rdev         uint32    // 0x34
+	St_auditoraudit uint32    // 0x38
+	St_useraudit    uint32    // 0x3c
+	St_blksize      uint32    // 0x40
+	St_createtime   uint32    // 0x44
+	St_auditid      [4]uint32 // 0x48
+	St_res01        uint32    // 0x58
+	Ft_ccsid        uint16    // 0x5c
+	Ft_flags        uint16    // 0x5e
+	St_res01a       [2]uint32 // 0x60
+	St_res02        uint32    // 0x68
+	St_blocks       uint32    // 0x6c
+	St_opaque       [3]uint8  // 0x70
+	St_visible      uint8     // 0x73
+	St_reftime      uint32    // 0x74
+	St_fid          uint64    // 0x78
+	St_filefmt      uint8     // 0x80
+	St_fspflag2     uint8     // 0x81
+	St_res03        [2]uint8  // 0x82
+	St_ctimemsec    uint32    // 0x84
+	St_seclabel     [8]uint8  // 0x88
+	St_res04        [4]uint8  // 0x90
+	// end of version 1
+	_               uint32    // 0x94
+	St_atime64      uint64    // 0x98
+	St_mtime64      uint64    // 0xa0
+	St_ctime64      uint64    // 0xa8
+	St_createtime64 uint64    // 0xb0
+	St_reftime64    uint64    // 0xb8
+	_               uint64    // 0xc0
+	St_res05        [16]uint8 // 0xc8
+	// end of version 2
+}
+
+type BpxFilestatus struct {
+	Oflag1 byte
+	Oflag2 byte
+	Oflag3 byte
+	Oflag4 byte
+}
+
+type BpxMode struct {
+	Ftype byte
+	Mode1 byte
+	Mode2 byte
+	Mode3 byte
+}
+
+// Thr attribute structure for extended attributes
+type Bpxyatt_t struct { // DSECT BPXYATT
+	Att_id           [4]uint8
+	Att_version      uint16
+	Att_res01        [2]uint8
+	Att_setflags1    uint8
+	Att_setflags2    uint8
+	Att_setflags3    uint8
+	Att_setflags4    uint8
+	Att_mode         uint32
+	Att_uid          uint32
+	Att_gid          uint32
+	Att_opaquemask   [3]uint8
+	Att_visblmaskres uint8
+	Att_opaque       [3]uint8
+	Att_visibleres   uint8
+	Att_size_h       uint32
+	Att_size_l       uint32
+	Att_atime        uint32
+	Att_mtime        uint32
+	Att_auditoraudit uint32
+	Att_useraudit    uint32
+	Att_ctime        uint32
+	Att_reftime      uint32
+	// end of version 1
+	Att_filefmt uint8
+	Att_res02   [3]uint8
+	Att_filetag uint32
+	Att_res03   [8]uint8
+	// end of version 2
+	Att_atime64   uint64
+	Att_mtime64   uint64
+	Att_ctime64   uint64
+	Att_reftime64 uint64
+	Att_seclabel  [8]uint8
+	Att_ver3res02 [8]uint8
+	// end of version 3
+}
+
+func BpxOpen(name string, options *BpxFilestatus, mode *BpxMode) (rv int32, rc int32, rn int32) {
+	if len(name) < 1024 {
+		var namebuf [1024]byte
+		sz := int32(copy(namebuf[:], name))
+		A2e(namebuf[:sz])
+		var parms [7]unsafe.Pointer
+		parms[0] = unsafe.Pointer(&sz)
+		parms[1] = unsafe.Pointer(&namebuf[0])
+		parms[2] = unsafe.Pointer(options)
+		parms[3] = unsafe.Pointer(mode)
+		parms[4] = unsafe.Pointer(&rv)
+		parms[5] = unsafe.Pointer(&rc)
+		parms[6] = unsafe.Pointer(&rn)
+		bpxcall(parms[:], BPX4OPN)
+		return rv, rc, rn
+	}
+	return -1, -1, -1
+}
+
+func BpxClose(fd int32) (rv int32, rc int32, rn int32) {
+	var parms [4]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&fd)
+	parms[1] = unsafe.Pointer(&rv)
+	parms[2] = unsafe.Pointer(&rc)
+	parms[3] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4CLO)
+	return rv, rc, rn
+}
+
+func BpxFileFStat(fd int32, st *Bpxystat_t) (rv int32, rc int32, rn int32) {
+	st.St_id = [4]uint8{0xe2, 0xe3, 0xc1, 0xe3}
+	st.St_version = 2
+	stat_sz := uint32(unsafe.Sizeof(*st))
+	var parms [6]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&fd)
+	parms[1] = unsafe.Pointer(&stat_sz)
+	parms[2] = unsafe.Pointer(st)
+	parms[3] = unsafe.Pointer(&rv)
+	parms[4] = unsafe.Pointer(&rc)
+	parms[5] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4FST)
+	return rv, rc, rn
+}
+
+func BpxFileStat(name string, st *Bpxystat_t) (rv int32, rc int32, rn int32) {
+	if len(name) < 1024 {
+		var namebuf [1024]byte
+		sz := int32(copy(namebuf[:], name))
+		A2e(namebuf[:sz])
+		st.St_id = [4]uint8{0xe2, 0xe3, 0xc1, 0xe3}
+		st.St_version = 2
+		stat_sz := uint32(unsafe.Sizeof(*st))
+		var parms [7]unsafe.Pointer
+		parms[0] = unsafe.Pointer(&sz)
+		parms[1] = unsafe.Pointer(&namebuf[0])
+		parms[2] = unsafe.Pointer(&stat_sz)
+		parms[3] = unsafe.Pointer(st)
+		parms[4] = unsafe.Pointer(&rv)
+		parms[5] = unsafe.Pointer(&rc)
+		parms[6] = unsafe.Pointer(&rn)
+		bpxcall(parms[:], BPX4STA)
+		return rv, rc, rn
+	}
+	return -1, -1, -1
+}
+
+func BpxFileLStat(name string, st *Bpxystat_t) (rv int32, rc int32, rn int32) {
+	if len(name) < 1024 {
+		var namebuf [1024]byte
+		sz := int32(copy(namebuf[:], name))
+		A2e(namebuf[:sz])
+		st.St_id = [4]uint8{0xe2, 0xe3, 0xc1, 0xe3}
+		st.St_version = 2
+		stat_sz := uint32(unsafe.Sizeof(*st))
+		var parms [7]unsafe.Pointer
+		parms[0] = unsafe.Pointer(&sz)
+		parms[1] = unsafe.Pointer(&namebuf[0])
+		parms[2] = unsafe.Pointer(&stat_sz)
+		parms[3] = unsafe.Pointer(st)
+		parms[4] = unsafe.Pointer(&rv)
+		parms[5] = unsafe.Pointer(&rc)
+		parms[6] = unsafe.Pointer(&rn)
+		bpxcall(parms[:], BPX4LST)
+		return rv, rc, rn
+	}
+	return -1, -1, -1
+}
+
+func BpxChattr(path string, attr *Bpxyatt_t) (rv int32, rc int32, rn int32) {
+	if len(path) >= 1024 {
+		return -1, -1, -1
+	}
+	var namebuf [1024]byte
+	sz := int32(copy(namebuf[:], path))
+	A2e(namebuf[:sz])
+	attr_sz := uint32(unsafe.Sizeof(*attr))
+	var parms [7]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&sz)
+	parms[1] = unsafe.Pointer(&namebuf[0])
+	parms[2] = unsafe.Pointer(&attr_sz)
+	parms[3] = unsafe.Pointer(attr)
+	parms[4] = unsafe.Pointer(&rv)
+	parms[5] = unsafe.Pointer(&rc)
+	parms[6] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4CHR)
+	return rv, rc, rn
+}
+
+func BpxLchattr(path string, attr *Bpxyatt_t) (rv int32, rc int32, rn int32) {
+	if len(path) >= 1024 {
+		return -1, -1, -1
+	}
+	var namebuf [1024]byte
+	sz := int32(copy(namebuf[:], path))
+	A2e(namebuf[:sz])
+	attr_sz := uint32(unsafe.Sizeof(*attr))
+	var parms [7]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&sz)
+	parms[1] = unsafe.Pointer(&namebuf[0])
+	parms[2] = unsafe.Pointer(&attr_sz)
+	parms[3] = unsafe.Pointer(attr)
+	parms[4] = unsafe.Pointer(&rv)
+	parms[5] = unsafe.Pointer(&rc)
+	parms[6] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4LCR)
+	return rv, rc, rn
+}
+
+func BpxFchattr(fd int32, attr *Bpxyatt_t) (rv int32, rc int32, rn int32) {
+	attr_sz := uint32(unsafe.Sizeof(*attr))
+	var parms [6]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&fd)
+	parms[1] = unsafe.Pointer(&attr_sz)
+	parms[2] = unsafe.Pointer(attr)
+	parms[3] = unsafe.Pointer(&rv)
+	parms[4] = unsafe.Pointer(&rc)
+	parms[5] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4FCR)
+	return rv, rc, rn
+}
+
+func BpxCondTimedWait(sec uint32, nsec uint32, events uint32, secrem *uint32, nsecrem *uint32) (rv int32, rc int32, rn int32) {
+	var parms [8]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&sec)
+	parms[1] = unsafe.Pointer(&nsec)
+	parms[2] = unsafe.Pointer(&events)
+	parms[3] = unsafe.Pointer(secrem)
+	parms[4] = unsafe.Pointer(nsecrem)
+	parms[5] = unsafe.Pointer(&rv)
+	parms[6] = unsafe.Pointer(&rc)
+	parms[7] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4CTW)
+	return rv, rc, rn
+}
+func BpxGetthent(in *Pgtha, outlen *uint32, out unsafe.Pointer) (rv int32, rc int32, rn int32) {
+	var parms [7]unsafe.Pointer
+	inlen := uint32(26) // nothing else will work. Go says Pgtha is 28-byte because of alignment, but Pgtha is "packed" and must be 26-byte
+	parms[0] = unsafe.Pointer(&inlen)
+	parms[1] = unsafe.Pointer(&in)
+	parms[2] = unsafe.Pointer(outlen)
+	parms[3] = unsafe.Pointer(&out)
+	parms[4] = unsafe.Pointer(&rv)
+	parms[5] = unsafe.Pointer(&rc)
+	parms[6] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4GTH)
+	return rv, rc, rn
+}
+func ZosJobname() (jobname string, err error) {
+	var pgtha Pgtha
+	pgtha.Pid = uint32(Getpid())
+	pgtha.Accesspid = PGTHA_CURRENT
+	pgtha.Flag1 = PGTHA_PROCESS
+	var out [256]byte
+	var outlen uint32
+	outlen = 256
+	rv, rc, rn := BpxGetthent(&pgtha, &outlen, unsafe.Pointer(&out[0]))
+	if rv == 0 {
+		gthc := []byte{0x87, 0xa3, 0x88, 0x83} // 'gthc' in ebcdic
+		ix := bytes.Index(out[:], gthc)
+		if ix == -1 {
+			err = fmt.Errorf("BPX4GTH: gthc return data not found")
+			return
+		}
+		jn := out[ix+80 : ix+88] // we didn't declare Pgthc, but jobname is 8-byte at offset 80
+		E2a(jn)
+		jobname = string(bytes.TrimRight(jn, " "))
+
+	} else {
+		err = fmt.Errorf("BPX4GTH: rc=%d errno=%d reason=code=0x%x", rv, rc, rn)
+	}
+	return
+}
+func Bpx4ptq(code int32, data string) (rv int32, rc int32, rn int32) {
+	var userdata [8]byte
+	var parms [5]unsafe.Pointer
+	copy(userdata[:], data+"        ")
+	A2e(userdata[:])
+	parms[0] = unsafe.Pointer(&code)
+	parms[1] = unsafe.Pointer(&userdata[0])
+	parms[2] = unsafe.Pointer(&rv)
+	parms[3] = unsafe.Pointer(&rc)
+	parms[4] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4PTQ)
+	return rv, rc, rn
+}
+
+const (
+	PT_TRACE_ME             = 0  // Debug this process
+	PT_READ_I               = 1  // Read a full word
+	PT_READ_D               = 2  // Read a full word
+	PT_READ_U               = 3  // Read control info
+	PT_WRITE_I              = 4  //Write a full word
+	PT_WRITE_D              = 5  //Write a full word
+	PT_CONTINUE             = 7  //Continue the process
+	PT_KILL                 = 8  //Terminate the process
+	PT_READ_GPR             = 11 // Read GPR, CR, PSW
+	PT_READ_FPR             = 12 // Read FPR
+	PT_READ_VR              = 13 // Read VR
+	PT_WRITE_GPR            = 14 // Write GPR, CR, PSW
+	PT_WRITE_FPR            = 15 // Write FPR
+	PT_WRITE_VR             = 16 // Write VR
+	PT_READ_BLOCK           = 17 // Read storage
+	PT_WRITE_BLOCK          = 19 // Write storage
+	PT_READ_GPRH            = 20 // Read GPRH
+	PT_WRITE_GPRH           = 21 // Write GPRH
+	PT_REGHSET              = 22 // Read all GPRHs
+	PT_ATTACH               = 30 // Attach to a process
+	PT_DETACH               = 31 // Detach from a process
+	PT_REGSET               = 32 // Read all GPRs
+	PT_REATTACH             = 33 // Reattach to a process
+	PT_LDINFO               = 34 // Read loader info
+	PT_MULTI                = 35 // Multi process mode
+	PT_LD64INFO             = 36 // RMODE64 Info Area
+	PT_BLOCKREQ             = 40 // Block request
+	PT_THREAD_INFO          = 60 // Read thread info
+	PT_THREAD_MODIFY        = 61
+	PT_THREAD_READ_FOCUS    = 62
+	PT_THREAD_WRITE_FOCUS   = 63
+	PT_THREAD_HOLD          = 64
+	PT_THREAD_SIGNAL        = 65
+	PT_EXPLAIN              = 66
+	PT_EVENTS               = 67
+	PT_THREAD_INFO_EXTENDED = 68
+	PT_REATTACH2            = 71
+	PT_CAPTURE              = 72
+	PT_UNCAPTURE            = 73
+	PT_GET_THREAD_TCB       = 74
+	PT_GET_ALET             = 75
+	PT_SWAPIN               = 76
+	PT_EXTENDED_EVENT       = 98
+	PT_RECOVER              = 99  // Debug a program check
+	PT_GPR0                 = 0   // General purpose register 0
+	PT_GPR1                 = 1   // General purpose register 1
+	PT_GPR2                 = 2   // General purpose register 2
+	PT_GPR3                 = 3   // General purpose register 3
+	PT_GPR4                 = 4   // General purpose register 4
+	PT_GPR5                 = 5   // General purpose register 5
+	PT_GPR6                 = 6   // General purpose register 6
+	PT_GPR7                 = 7   // General purpose register 7
+	PT_GPR8                 = 8   // General purpose register 8
+	PT_GPR9                 = 9   // General purpose register 9
+	PT_GPR10                = 10  // General purpose register 10
+	PT_GPR11                = 11  // General purpose register 11
+	PT_GPR12                = 12  // General purpose register 12
+	PT_GPR13                = 13  // General purpose register 13
+	PT_GPR14                = 14  // General purpose register 14
+	PT_GPR15                = 15  // General purpose register 15
+	PT_FPR0                 = 16  // Floating point register 0
+	PT_FPR1                 = 17  // Floating point register 1
+	PT_FPR2                 = 18  // Floating point register 2
+	PT_FPR3                 = 19  // Floating point register 3
+	PT_FPR4                 = 20  // Floating point register 4
+	PT_FPR5                 = 21  // Floating point register 5
+	PT_FPR6                 = 22  // Floating point register 6
+	PT_FPR7                 = 23  // Floating point register 7
+	PT_FPR8                 = 24  // Floating point register 8
+	PT_FPR9                 = 25  // Floating point register 9
+	PT_FPR10                = 26  // Floating point register 10
+	PT_FPR11                = 27  // Floating point register 11
+	PT_FPR12                = 28  // Floating point register 12
+	PT_FPR13                = 29  // Floating point register 13
+	PT_FPR14                = 30  // Floating point register 14
+	PT_FPR15                = 31  // Floating point register 15
+	PT_FPC                  = 32  // Floating point control register
+	PT_PSW                  = 40  // PSW
+	PT_PSW0                 = 40  // Left half of the PSW
+	PT_PSW1                 = 41  // Right half of the PSW
+	PT_CR0                  = 42  // Control register 0
+	PT_CR1                  = 43  // Control register 1
+	PT_CR2                  = 44  // Control register 2
+	PT_CR3                  = 45  // Control register 3
+	PT_CR4                  = 46  // Control register 4
+	PT_CR5                  = 47  // Control register 5
+	PT_CR6                  = 48  // Control register 6
+	PT_CR7                  = 49  // Control register 7
+	PT_CR8                  = 50  // Control register 8
+	PT_CR9                  = 51  // Control register 9
+	PT_CR10                 = 52  // Control register 10
+	PT_CR11                 = 53  // Control register 11
+	PT_CR12                 = 54  // Control register 12
+	PT_CR13                 = 55  // Control register 13
+	PT_CR14                 = 56  // Control register 14
+	PT_CR15                 = 57  // Control register 15
+	PT_GPRH0                = 58  // GP High register 0
+	PT_GPRH1                = 59  // GP High register 1
+	PT_GPRH2                = 60  // GP High register 2
+	PT_GPRH3                = 61  // GP High register 3
+	PT_GPRH4                = 62  // GP High register 4
+	PT_GPRH5                = 63  // GP High register 5
+	PT_GPRH6                = 64  // GP High register 6
+	PT_GPRH7                = 65  // GP High register 7
+	PT_GPRH8                = 66  // GP High register 8
+	PT_GPRH9                = 67  // GP High register 9
+	PT_GPRH10               = 68  // GP High register 10
+	PT_GPRH11               = 69  // GP High register 11
+	PT_GPRH12               = 70  // GP High register 12
+	PT_GPRH13               = 71  // GP High register 13
+	PT_GPRH14               = 72  // GP High register 14
+	PT_GPRH15               = 73  // GP High register 15
+	PT_VR0                  = 74  // Vector register 0
+	PT_VR1                  = 75  // Vector register 1
+	PT_VR2                  = 76  // Vector register 2
+	PT_VR3                  = 77  // Vector register 3
+	PT_VR4                  = 78  // Vector register 4
+	PT_VR5                  = 79  // Vector register 5
+	PT_VR6                  = 80  // Vector register 6
+	PT_VR7                  = 81  // Vector register 7
+	PT_VR8                  = 82  // Vector register 8
+	PT_VR9                  = 83  // Vector register 9
+	PT_VR10                 = 84  // Vector register 10
+	PT_VR11                 = 85  // Vector register 11
+	PT_VR12                 = 86  // Vector register 12
+	PT_VR13                 = 87  // Vector register 13
+	PT_VR14                 = 88  // Vector register 14
+	PT_VR15                 = 89  // Vector register 15
+	PT_VR16                 = 90  // Vector register 16
+	PT_VR17                 = 91  // Vector register 17
+	PT_VR18                 = 92  // Vector register 18
+	PT_VR19                 = 93  // Vector register 19
+	PT_VR20                 = 94  // Vector register 20
+	PT_VR21                 = 95  // Vector register 21
+	PT_VR22                 = 96  // Vector register 22
+	PT_VR23                 = 97  // Vector register 23
+	PT_VR24                 = 98  // Vector register 24
+	PT_VR25                 = 99  // Vector register 25
+	PT_VR26                 = 100 // Vector register 26
+	PT_VR27                 = 101 // Vector register 27
+	PT_VR28                 = 102 // Vector register 28
+	PT_VR29                 = 103 // Vector register 29
+	PT_VR30                 = 104 // Vector register 30
+	PT_VR31                 = 105 // Vector register 31
+	PT_PSWG                 = 106 // PSWG
+	PT_PSWG0                = 106 // Bytes 0-3
+	PT_PSWG1                = 107 // Bytes 4-7
+	PT_PSWG2                = 108 // Bytes 8-11 (IA high word)
+	PT_PSWG3                = 109 // Bytes 12-15 (IA low word)
+)
+
+func Bpx4ptr(request int32, pid int32, addr unsafe.Pointer, data unsafe.Pointer, buffer unsafe.Pointer) (rv int32, rc int32, rn int32) {
+	var parms [8]unsafe.Pointer
+	parms[0] = unsafe.Pointer(&request)
+	parms[1] = unsafe.Pointer(&pid)
+	parms[2] = unsafe.Pointer(&addr)
+	parms[3] = unsafe.Pointer(&data)
+	parms[4] = unsafe.Pointer(&buffer)
+	parms[5] = unsafe.Pointer(&rv)
+	parms[6] = unsafe.Pointer(&rc)
+	parms[7] = unsafe.Pointer(&rn)
+	bpxcall(parms[:], BPX4PTR)
+	return rv, rc, rn
+}
+
+func copyU8(val uint8, dest []uint8) int {
+	if len(dest) < 1 {
+		return 0
+	}
+	dest[0] = val
+	return 1
+}
+
+func copyU8Arr(src, dest []uint8) int {
+	if len(dest) < len(src) {
+		return 0
+	}
+	for i, v := range src {
+		dest[i] = v
+	}
+	return len(src)
+}
+
+func copyU16(val uint16, dest []uint16) int {
+	if len(dest) < 1 {
+		return 0
+	}
+	dest[0] = val
+	return 1
+}
+
+func copyU32(val uint32, dest []uint32) int {
+	if len(dest) < 1 {
+		return 0
+	}
+	dest[0] = val
+	return 1
+}
+
+func copyU32Arr(src, dest []uint32) int {
+	if len(dest) < len(src) {
+		return 0
+	}
+	for i, v := range src {
+		dest[i] = v
+	}
+	return len(src)
+}
+
+func copyU64(val uint64, dest []uint64) int {
+	if len(dest) < 1 {
+		return 0
+	}
+	dest[0] = val
+	return 1
+}

vendor/golang.org/x/sys/unix/bpxsvc_zos.s

@@ -0,0 +1,192 @@
+// Copyright 2024 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+#include "go_asm.h"
+#include "textflag.h"
+
+// function to call USS assembly language services
+//
+// doc: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_3.1.0/com.ibm.zos.v3r1.bpxb100/bit64env.htm
+//
+//   arg1 unsafe.Pointer array that ressembles an OS PLIST
+//
+//   arg2 function offset as in
+//       doc: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_3.1.0/com.ibm.zos.v3r1.bpxb100/bpx2cr_List_of_offsets.htm
+//
+// func bpxcall(plist []unsafe.Pointer, bpx_offset int64)
+
+TEXT ·bpxcall(SB), NOSPLIT|NOFRAME, $0
+	MOVD  plist_base+0(FP), R1  // r1 points to plist
+	MOVD  bpx_offset+24(FP), R2 // r2 offset to BPX vector table
+	MOVD  R14, R7               // save r14
+	MOVD  R15, R8               // save r15
+	MOVWZ 16(R0), R9
+	MOVWZ 544(R9), R9
+	MOVWZ 24(R9), R9            // call vector in r9
+	ADD   R2, R9                // add offset to vector table
+	MOVWZ (R9), R9              // r9 points to entry point
+	BYTE  $0x0D                 // BL R14,R9 --> basr r14,r9
+	BYTE  $0xE9                 // clobbers 0,1,14,15
+	MOVD  R8, R15               // restore 15
+	JMP   R7                    // return via saved return address
+
+//   func A2e(arr [] byte)
+//   code page conversion from  819 to 1047
+TEXT ·A2e(SB), NOSPLIT|NOFRAME, $0
+	MOVD arg_base+0(FP), R2                        // pointer to arry of characters
+	MOVD arg_len+8(FP), R3                         // count
+	XOR  R0, R0
+	XOR  R1, R1
+	BYTE $0xA7; BYTE $0x15; BYTE $0x00; BYTE $0x82 // BRAS 1,(2+(256/2))
+
+	// ASCII -> EBCDIC conversion table:
+	BYTE $0x00; BYTE $0x01; BYTE $0x02; BYTE $0x03
+	BYTE $0x37; BYTE $0x2d; BYTE $0x2e; BYTE $0x2f
+	BYTE $0x16; BYTE $0x05; BYTE $0x15; BYTE $0x0b
+	BYTE $0x0c; BYTE $0x0d; BYTE $0x0e; BYTE $0x0f
+	BYTE $0x10; BYTE $0x11; BYTE $0x12; BYTE $0x13
+	BYTE $0x3c; BYTE $0x3d; BYTE $0x32; BYTE $0x26
+	BYTE $0x18; BYTE $0x19; BYTE $0x3f; BYTE $0x27
+	BYTE $0x1c; BYTE $0x1d; BYTE $0x1e; BYTE $0x1f
+	BYTE $0x40; BYTE $0x5a; BYTE $0x7f; BYTE $0x7b
+	BYTE $0x5b; BYTE $0x6c; BYTE $0x50; BYTE $0x7d
+	BYTE $0x4d; BYTE $0x5d; BYTE $0x5c; BYTE $0x4e
+	BYTE $0x6b; BYTE $0x60; BYTE $0x4b; BYTE $0x61
+	BYTE $0xf0; BYTE $0xf1; BYTE $0xf2; BYTE $0xf3
+	BYTE $0xf4; BYTE $0xf5; BYTE $0xf6; BYTE $0xf7
+	BYTE $0xf8; BYTE $0xf9; BYTE $0x7a; BYTE $0x5e
+	BYTE $0x4c; BYTE $0x7e; BYTE $0x6e; BYTE $0x6f
+	BYTE $0x7c; BYTE $0xc1; BYTE $0xc2; BYTE $0xc3
+	BYTE $0xc4; BYTE $0xc5; BYTE $0xc6; BYTE $0xc7
+	BYTE $0xc8; BYTE $0xc9; BYTE $0xd1; BYTE $0xd2
+	BYTE $0xd3; BYTE $0xd4; BYTE $0xd5; BYTE $0xd6
+	BYTE $0xd7; BYTE $0xd8; BYTE $0xd9; BYTE $0xe2
+	BYTE $0xe3; BYTE $0xe4; BYTE $0xe5; BYTE $0xe6
+	BYTE $0xe7; BYTE $0xe8; BYTE $0xe9; BYTE $0xad
+	BYTE $0xe0; BYTE $0xbd; BYTE $0x5f; BYTE $0x6d
+	BYTE $0x79; BYTE $0x81; BYTE $0x82; BYTE $0x83
+	BYTE $0x84; BYTE $0x85; BYTE $0x86; BYTE $0x87
+	BYTE $0x88; BYTE $0x89; BYTE $0x91; BYTE $0x92
+	BYTE $0x93; BYTE $0x94; BYTE $0x95; BYTE $0x96
+	BYTE $0x97; BYTE $0x98; BYTE $0x99; BYTE $0xa2
+	BYTE $0xa3; BYTE $0xa4; BYTE $0xa5; BYTE $0xa6
+	BYTE $0xa7; BYTE $0xa8; BYTE $0xa9; BYTE $0xc0
+	BYTE $0x4f; BYTE $0xd0; BYTE $0xa1; BYTE $0x07
+	BYTE $0x20; BYTE $0x21; BYTE $0x22; BYTE $0x23
+	BYTE $0x24; BYTE $0x25; BYTE $0x06; BYTE $0x17
+	BYTE $0x28; BYTE $0x29; BYTE $0x2a; BYTE $0x2b
+	BYTE $0x2c; BYTE $0x09; BYTE $0x0a; BYTE $0x1b
+	BYTE $0x30; BYTE $0x31; BYTE $0x1a; BYTE $0x33
+	BYTE $0x34; BYTE $0x35; BYTE $0x36; BYTE $0x08
+	BYTE $0x38; BYTE $0x39; BYTE $0x3a; BYTE $0x3b
+	BYTE $0x04; BYTE $0x14; BYTE $0x3e; BYTE $0xff
+	BYTE $0x41; BYTE $0xaa; BYTE $0x4a; BYTE $0xb1
+	BYTE $0x9f; BYTE $0xb2; BYTE $0x6a; BYTE $0xb5
+	BYTE $0xbb; BYTE $0xb4; BYTE $0x9a; BYTE $0x8a
+	BYTE $0xb0; BYTE $0xca; BYTE $0xaf; BYTE $0xbc
+	BYTE $0x90; BYTE $0x8f; BYTE $0xea; BYTE $0xfa
+	BYTE $0xbe; BYTE $0xa0; BYTE $0xb6; BYTE $0xb3
+	BYTE $0x9d; BYTE $0xda; BYTE $0x9b; BYTE $0x8b
+	BYTE $0xb7; BYTE $0xb8; BYTE $0xb9; BYTE $0xab
+	BYTE $0x64; BYTE $0x65; BYTE $0x62; BYTE $0x66
+	BYTE $0x63; BYTE $0x67; BYTE $0x9e; BYTE $0x68
+	BYTE $0x74; BYTE $0x71; BYTE $0x72; BYTE $0x73
+	BYTE $0x78; BYTE $0x75; BYTE $0x76; BYTE $0x77
+	BYTE $0xac; BYTE $0x69; BYTE $0xed; BYTE $0xee
+	BYTE $0xeb; BYTE $0xef; BYTE $0xec; BYTE $0xbf
+	BYTE $0x80; BYTE $0xfd; BYTE $0xfe; BYTE $0xfb
+	BYTE $0xfc; BYTE $0xba; BYTE $0xae; BYTE $0x59
+	BYTE $0x44; BYTE $0x45; BYTE $0x42; BYTE $0x46
+	BYTE $0x43; BYTE $0x47; BYTE $0x9c; BYTE $0x48
+	BYTE $0x54; BYTE $0x51; BYTE $0x52; BYTE $0x53
+	BYTE $0x58; BYTE $0x55; BYTE $0x56; BYTE $0x57
+	BYTE $0x8c; BYTE $0x49; BYTE $0xcd; BYTE $0xce
+	BYTE $0xcb; BYTE $0xcf; BYTE $0xcc; BYTE $0xe1
+	BYTE $0x70; BYTE $0xdd; BYTE $0xde; BYTE $0xdb
+	BYTE $0xdc; BYTE $0x8d; BYTE $0x8e; BYTE $0xdf
+
+retry:
+	WORD $0xB9931022 // TROO 2,2,b'0001'
+	BVS  retry
+	RET
+
+//   func e2a(arr [] byte)
+//   code page conversion from  1047 to 819
+TEXT ·E2a(SB), NOSPLIT|NOFRAME, $0
+	MOVD arg_base+0(FP), R2                        // pointer to arry of characters
+	MOVD arg_len+8(FP), R3                         // count
+	XOR  R0, R0
+	XOR  R1, R1
+	BYTE $0xA7; BYTE $0x15; BYTE $0x00; BYTE $0x82 // BRAS 1,(2+(256/2))
+
+	// EBCDIC -> ASCII conversion table:
+	BYTE $0x00; BYTE $0x01; BYTE $0x02; BYTE $0x03
+	BYTE $0x9c; BYTE $0x09; BYTE $0x86; BYTE $0x7f
+	BYTE $0x97; BYTE $0x8d; BYTE $0x8e; BYTE $0x0b
+	BYTE $0x0c; BYTE $0x0d; BYTE $0x0e; BYTE $0x0f
+	BYTE $0x10; BYTE $0x11; BYTE $0x12; BYTE $0x13
+	BYTE $0x9d; BYTE $0x0a; BYTE $0x08; BYTE $0x87
+	BYTE $0x18; BYTE $0x19; BYTE $0x92; BYTE $0x8f
+	BYTE $0x1c; BYTE $0x1d; BYTE $0x1e; BYTE $0x1f
+	BYTE $0x80; BYTE $0x81; BYTE $0x82; BYTE $0x83
+	BYTE $0x84; BYTE $0x85; BYTE $0x17; BYTE $0x1b
+	BYTE $0x88; BYTE $0x89; BYTE $0x8a; BYTE $0x8b
+	BYTE $0x8c; BYTE $0x05; BYTE $0x06; BYTE $0x07
+	BYTE $0x90; BYTE $0x91; BYTE $0x16; BYTE $0x93
+	BYTE $0x94; BYTE $0x95; BYTE $0x96; BYTE $0x04
+	BYTE $0x98; BYTE $0x99; BYTE $0x9a; BYTE $0x9b
+	BYTE $0x14; BYTE $0x15; BYTE $0x9e; BYTE $0x1a
+	BYTE $0x20; BYTE $0xa0; BYTE $0xe2; BYTE $0xe4
+	BYTE $0xe0; BYTE $0xe1; BYTE $0xe3; BYTE $0xe5
+	BYTE $0xe7; BYTE $0xf1; BYTE $0xa2; BYTE $0x2e
+	BYTE $0x3c; BYTE $0x28; BYTE $0x2b; BYTE $0x7c
+	BYTE $0x26; BYTE $0xe9; BYTE $0xea; BYTE $0xeb
+	BYTE $0xe8; BYTE $0xed; BYTE $0xee; BYTE $0xef
+	BYTE $0xec; BYTE $0xdf; BYTE $0x21; BYTE $0x24
+	BYTE $0x2a; BYTE $0x29; BYTE $0x3b; BYTE $0x5e
+	BYTE $0x2d; BYTE $0x2f; BYTE $0xc2; BYTE $0xc4
+	BYTE $0xc0; BYTE $0xc1; BYTE $0xc3; BYTE $0xc5
+	BYTE $0xc7; BYTE $0xd1; BYTE $0xa6; BYTE $0x2c
+	BYTE $0x25; BYTE $0x5f; BYTE $0x3e; BYTE $0x3f
+	BYTE $0xf8; BYTE $0xc9; BYTE $0xca; BYTE $0xcb
+	BYTE $0xc8; BYTE $0xcd; BYTE $0xce; BYTE $0xcf
+	BYTE $0xcc; BYTE $0x60; BYTE $0x3a; BYTE $0x23
+	BYTE $0x40; BYTE $0x27; BYTE $0x3d; BYTE $0x22
+	BYTE $0xd8; BYTE $0x61; BYTE $0x62; BYTE $0x63
+	BYTE $0x64; BYTE $0x65; BYTE $0x66; BYTE $0x67
+	BYTE $0x68; BYTE $0x69; BYTE $0xab; BYTE $0xbb
+	BYTE $0xf0; BYTE $0xfd; BYTE $0xfe; BYTE $0xb1
+	BYTE $0xb0; BYTE $0x6a; BYTE $0x6b; BYTE $0x6c
+	BYTE $0x6d; BYTE $0x6e; BYTE $0x6f; BYTE $0x70
+	BYTE $0x71; BYTE $0x72; BYTE $0xaa; BYTE $0xba
+	BYTE $0xe6; BYTE $0xb8; BYTE $0xc6; BYTE $0xa4
+	BYTE $0xb5; BYTE $0x7e; BYTE $0x73; BYTE $0x74
+	BYTE $0x75; BYTE $0x76; BYTE $0x77; BYTE $0x78
+	BYTE $0x79; BYTE $0x7a; BYTE $0xa1; BYTE $0xbf
+	BYTE $0xd0; BYTE $0x5b; BYTE $0xde; BYTE $0xae
+	BYTE $0xac; BYTE $0xa3; BYTE $0xa5; BYTE $0xb7
+	BYTE $0xa9; BYTE $0xa7; BYTE $0xb6; BYTE $0xbc
+	BYTE $0xbd; BYTE $0xbe; BYTE $0xdd; BYTE $0xa8
+	BYTE $0xaf; BYTE $0x5d; BYTE $0xb4; BYTE $0xd7
+	BYTE $0x7b; BYTE $0x41; BYTE $0x42; BYTE $0x43
+	BYTE $0x44; BYTE $0x45; BYTE $0x46; BYTE $0x47
+	BYTE $0x48; BYTE $0x49; BYTE $0xad; BYTE $0xf4
+	BYTE $0xf6; BYTE $0xf2; BYTE $0xf3; BYTE $0xf5
+	BYTE $0x7d; BYTE $0x4a; BYTE $0x4b; BYTE $0x4c
+	BYTE $0x4d; BYTE $0x4e; BYTE $0x4f; BYTE $0x50
+	BYTE $0x51; BYTE $0x52; BYTE $0xb9; BYTE $0xfb
+	BYTE $0xfc; BYTE $0xf9; BYTE $0xfa; BYTE $0xff
+	BYTE $0x5c; BYTE $0xf7; BYTE $0x53; BYTE $0x54
+	BYTE $0x55; BYTE $0x56; BYTE $0x57; BYTE $0x58
+	BYTE $0x59; BYTE $0x5a; BYTE $0xb2; BYTE $0xd4
+	BYTE $0xd6; BYTE $0xd2; BYTE $0xd3; BYTE $0xd5
+	BYTE $0x30; BYTE $0x31; BYTE $0x32; BYTE $0x33
+	BYTE $0x34; BYTE $0x35; BYTE $0x36; BYTE $0x37
+	BYTE $0x38; BYTE $0x39; BYTE $0xb3; BYTE $0xdb
+	BYTE $0xdc; BYTE $0xd9; BYTE $0xda; BYTE $0x9f
+
+retry:
+	WORD $0xB9931022 // TROO 2,2,b'0001'
+	BVS  retry
+	RET

vendor/golang.org/x/sys/unix/cap_freebsd.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build freebsd
-// +build freebsd
 
 package unix
 

vendor/golang.org/x/sys/unix/constants.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris zos
 
 package unix
 

vendor/golang.org/x/sys/unix/dev_aix_ppc.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build aix && ppc
-// +build aix,ppc
 
 // Functions to access/create device major and minor numbers matching the
 // encoding used by AIX.

vendor/golang.org/x/sys/unix/dev_aix_ppc64.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build aix && ppc64
-// +build aix,ppc64
 
 // Functions to access/create device major and minor numbers matching the
 // encoding used AIX.

vendor/golang.org/x/sys/unix/dev_zos.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build zos && s390x
-// +build zos,s390x
 
 // Functions to access/create device major and minor numbers matching the
 // encoding used by z/OS.

vendor/golang.org/x/sys/unix/dirent.go

@@ -2,8 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris
+//go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
 
 package unix
 

vendor/golang.org/x/sys/unix/endian_big.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 //
 //go:build armbe || arm64be || m68k || mips || mips64 || mips64p32 || ppc || ppc64 || s390 || s390x || shbe || sparc || sparc64
-// +build armbe arm64be m68k mips mips64 mips64p32 ppc ppc64 s390 s390x shbe sparc sparc64
 
 package unix
 

vendor/golang.org/x/sys/unix/endian_little.go

@@ -2,8 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 //
-//go:build 386 || amd64 || amd64p32 || alpha || arm || arm64 || mipsle || mips64le || mips64p32le || nios2 || ppc64le || riscv || riscv64 || sh
-// +build 386 amd64 amd64p32 alpha arm arm64 mipsle mips64le mips64p32le nios2 ppc64le riscv riscv64 sh
+//go:build 386 || amd64 || amd64p32 || alpha || arm || arm64 || loong64 || mipsle || mips64le || mips64p32le || nios2 || ppc64le || riscv || riscv64 || sh
 
 package unix
 

vendor/golang.org/x/sys/unix/env_unix.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris zos
 
 // Unix environment variables.
 

vendor/golang.org/x/sys/unix/epoll_zos.go

@@ -1,221 +0,0 @@
-// Copyright 2020 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-//go:build zos && s390x
-// +build zos,s390x
-
-package unix
-
-import (
-	"sync"
-)
-
-// This file simulates epoll on z/OS using poll.
-
-// Analogous to epoll_event on Linux.
-// TODO(neeilan): Pad is because the Linux kernel expects a 96-bit struct. We never pass this to the kernel; remove?
-type EpollEvent struct {
-	Events uint32
-	Fd     int32
-	Pad    int32
-}
-
-const (
-	EPOLLERR      = 0x8
-	EPOLLHUP      = 0x10
-	EPOLLIN       = 0x1
-	EPOLLMSG      = 0x400
-	EPOLLOUT      = 0x4
-	EPOLLPRI      = 0x2
-	EPOLLRDBAND   = 0x80
-	EPOLLRDNORM   = 0x40
-	EPOLLWRBAND   = 0x200
-	EPOLLWRNORM   = 0x100
-	EPOLL_CTL_ADD = 0x1
-	EPOLL_CTL_DEL = 0x2
-	EPOLL_CTL_MOD = 0x3
-	// The following constants are part of the epoll API, but represent
-	// currently unsupported functionality on z/OS.
-	// EPOLL_CLOEXEC  = 0x80000
-	// EPOLLET        = 0x80000000
-	// EPOLLONESHOT   = 0x40000000
-	// EPOLLRDHUP     = 0x2000     // Typically used with edge-triggered notis
-	// EPOLLEXCLUSIVE = 0x10000000 // Exclusive wake-up mode
-	// EPOLLWAKEUP    = 0x20000000 // Relies on Linux's BLOCK_SUSPEND capability
-)
-
-// TODO(neeilan): We can eliminate these epToPoll / pToEpoll calls by using identical mask values for POLL/EPOLL
-// constants where possible The lower 16 bits of epoll events (uint32) can fit any system poll event (int16).
-
-// epToPollEvt converts epoll event field to poll equivalent.
-// In epoll, Events is a 32-bit field, while poll uses 16 bits.
-func epToPollEvt(events uint32) int16 {
-	var ep2p = map[uint32]int16{
-		EPOLLIN:  POLLIN,
-		EPOLLOUT: POLLOUT,
-		EPOLLHUP: POLLHUP,
-		EPOLLPRI: POLLPRI,
-		EPOLLERR: POLLERR,
-	}
-
-	var pollEvts int16 = 0
-	for epEvt, pEvt := range ep2p {
-		if (events & epEvt) != 0 {
-			pollEvts |= pEvt
-		}
-	}
-
-	return pollEvts
-}
-
-// pToEpollEvt converts 16 bit poll event bitfields to 32-bit epoll event fields.
-func pToEpollEvt(revents int16) uint32 {
-	var p2ep = map[int16]uint32{
-		POLLIN:  EPOLLIN,
-		POLLOUT: EPOLLOUT,
-		POLLHUP: EPOLLHUP,
-		POLLPRI: EPOLLPRI,
-		POLLERR: EPOLLERR,
-	}
-
-	var epollEvts uint32 = 0
-	for pEvt, epEvt := range p2ep {
-		if (revents & pEvt) != 0 {
-			epollEvts |= epEvt
-		}
-	}
-
-	return epollEvts
-}
-
-// Per-process epoll implementation.
-type epollImpl struct {
-	mu       sync.Mutex
-	epfd2ep  map[int]*eventPoll
-	nextEpfd int
-}
-
-// eventPoll holds a set of file descriptors being watched by the process. A process can have multiple epoll instances.
-// On Linux, this is an in-kernel data structure accessed through a fd.
-type eventPoll struct {
-	mu  sync.Mutex
-	fds map[int]*EpollEvent
-}
-
-// epoll impl for this process.
-var impl epollImpl = epollImpl{
-	epfd2ep:  make(map[int]*eventPoll),
-	nextEpfd: 0,
-}
-
-func (e *epollImpl) epollcreate(size int) (epfd int, err error) {
-	e.mu.Lock()
-	defer e.mu.Unlock()
-	epfd = e.nextEpfd
-	e.nextEpfd++
-
-	e.epfd2ep[epfd] = &eventPoll{
-		fds: make(map[int]*EpollEvent),
-	}
-	return epfd, nil
-}
-
-func (e *epollImpl) epollcreate1(flag int) (fd int, err error) {
-	return e.epollcreate(4)
-}
-
-func (e *epollImpl) epollctl(epfd int, op int, fd int, event *EpollEvent) (err error) {
-	e.mu.Lock()
-	defer e.mu.Unlock()
-
-	ep, ok := e.epfd2ep[epfd]
-	if !ok {
-
-		return EBADF
-	}
-
-	switch op {
-	case EPOLL_CTL_ADD:
-		// TODO(neeilan): When we make epfds and fds disjoint, detect epoll
-		// loops here (instances watching each other) and return ELOOP.
-		if _, ok := ep.fds[fd]; ok {
-			return EEXIST
-		}
-		ep.fds[fd] = event
-	case EPOLL_CTL_MOD:
-		if _, ok := ep.fds[fd]; !ok {
-			return ENOENT
-		}
-		ep.fds[fd] = event
-	case EPOLL_CTL_DEL:
-		if _, ok := ep.fds[fd]; !ok {
-			return ENOENT
-		}
-		delete(ep.fds, fd)
-
-	}
-	return nil
-}
-
-// Must be called while holding ep.mu
-func (ep *eventPoll) getFds() []int {
-	fds := make([]int, len(ep.fds))
-	for fd := range ep.fds {
-		fds = append(fds, fd)
-	}
-	return fds
-}
-
-func (e *epollImpl) epollwait(epfd int, events []EpollEvent, msec int) (n int, err error) {
-	e.mu.Lock() // in [rare] case of concurrent epollcreate + epollwait
-	ep, ok := e.epfd2ep[epfd]
-
-	if !ok {
-		e.mu.Unlock()
-		return 0, EBADF
-	}
-
-	pollfds := make([]PollFd, 4)
-	for fd, epollevt := range ep.fds {
-		pollfds = append(pollfds, PollFd{Fd: int32(fd), Events: epToPollEvt(epollevt.Events)})
-	}
-	e.mu.Unlock()
-
-	n, err = Poll(pollfds, msec)
-	if err != nil {
-		return n, err
-	}
-
-	i := 0
-	for _, pFd := range pollfds {
-		if pFd.Revents != 0 {
-			events[i] = EpollEvent{Fd: pFd.Fd, Events: pToEpollEvt(pFd.Revents)}
-			i++
-		}
-
-		if i == n {
-			break
-		}
-	}
-
-	return n, nil
-}
-
-func EpollCreate(size int) (fd int, err error) {
-	return impl.epollcreate(size)
-}
-
-func EpollCreate1(flag int) (fd int, err error) {
-	return impl.epollcreate1(flag)
-}
-
-func EpollCtl(epfd int, op int, fd int, event *EpollEvent) (err error) {
-	return impl.epollctl(epfd, op, fd, event)
-}
-
-// Because EpollWait mutates events, the caller is expected to coordinate
-// concurrent access if calling with the same epfd from multiple goroutines.
-func EpollWait(epfd int, events []EpollEvent, msec int) (n int, err error) {
-	return impl.epollwait(epfd, events, msec)
-}

vendor/golang.org/x/sys/unix/errors_freebsd_386.go

@@ -1,233 +0,0 @@
-// Copyright 2017 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// Constants that were deprecated or moved to enums in the FreeBSD headers. Keep
-// them here for backwards compatibility.
-
-package unix
-
-const (
-	DLT_HHDLC                         = 0x79
-	IFF_SMART                         = 0x20
-	IFT_1822                          = 0x2
-	IFT_A12MPPSWITCH                  = 0x82
-	IFT_AAL2                          = 0xbb
-	IFT_AAL5                          = 0x31
-	IFT_ADSL                          = 0x5e
-	IFT_AFLANE8023                    = 0x3b
-	IFT_AFLANE8025                    = 0x3c
-	IFT_ARAP                          = 0x58
-	IFT_ARCNET                        = 0x23
-	IFT_ARCNETPLUS                    = 0x24
-	IFT_ASYNC                         = 0x54
-	IFT_ATM                           = 0x25
-	IFT_ATMDXI                        = 0x69
-	IFT_ATMFUNI                       = 0x6a
-	IFT_ATMIMA                        = 0x6b
-	IFT_ATMLOGICAL                    = 0x50
-	IFT_ATMRADIO                      = 0xbd
-	IFT_ATMSUBINTERFACE               = 0x86
-	IFT_ATMVCIENDPT                   = 0xc2
-	IFT_ATMVIRTUAL                    = 0x95
-	IFT_BGPPOLICYACCOUNTING           = 0xa2
-	IFT_BSC                           = 0x53
-	IFT_CCTEMUL                       = 0x3d
-	IFT_CEPT                          = 0x13
-	IFT_CES                           = 0x85
-	IFT_CHANNEL                       = 0x46
-	IFT_CNR                           = 0x55
-	IFT_COFFEE                        = 0x84
-	IFT_COMPOSITELINK                 = 0x9b
-	IFT_DCN                           = 0x8d
-	IFT_DIGITALPOWERLINE              = 0x8a
-	IFT_DIGITALWRAPPEROVERHEADCHANNEL = 0xba
-	IFT_DLSW                          = 0x4a
-	IFT_DOCSCABLEDOWNSTREAM           = 0x80
-	IFT_DOCSCABLEMACLAYER             = 0x7f
-	IFT_DOCSCABLEUPSTREAM             = 0x81
-	IFT_DS0                           = 0x51
-	IFT_DS0BUNDLE                     = 0x52
-	IFT_DS1FDL                        = 0xaa
-	IFT_DS3                           = 0x1e
-	IFT_DTM                           = 0x8c
-	IFT_DVBASILN                      = 0xac
-	IFT_DVBASIOUT                     = 0xad
-	IFT_DVBRCCDOWNSTREAM              = 0x93
-	IFT_DVBRCCMACLAYER                = 0x92
-	IFT_DVBRCCUPSTREAM                = 0x94
-	IFT_ENC                           = 0xf4
-	IFT_EON                           = 0x19
-	IFT_EPLRS                         = 0x57
-	IFT_ESCON                         = 0x49
-	IFT_ETHER                         = 0x6
-	IFT_FAITH                         = 0xf2
-	IFT_FAST                          = 0x7d
-	IFT_FASTETHER                     = 0x3e
-	IFT_FASTETHERFX                   = 0x45
-	IFT_FDDI                          = 0xf
-	IFT_FIBRECHANNEL                  = 0x38
-	IFT_FRAMERELAYINTERCONNECT        = 0x3a
-	IFT_FRAMERELAYMPI                 = 0x5c
-	IFT_FRDLCIENDPT                   = 0xc1
-	IFT_FRELAY                        = 0x20
-	IFT_FRELAYDCE                     = 0x2c
-	IFT_FRF16MFRBUNDLE                = 0xa3
-	IFT_FRFORWARD                     = 0x9e
-	IFT_G703AT2MB                     = 0x43
-	IFT_G703AT64K                     = 0x42
-	IFT_GIF                           = 0xf0
-	IFT_GIGABITETHERNET               = 0x75
-	IFT_GR303IDT                      = 0xb2
-	IFT_GR303RDT                      = 0xb1
-	IFT_H323GATEKEEPER                = 0xa4
-	IFT_H323PROXY                     = 0xa5
-	IFT_HDH1822                       = 0x3
-	IFT_HDLC                          = 0x76
-	IFT_HDSL2                         = 0xa8
-	IFT_HIPERLAN2                     = 0xb7
-	IFT_HIPPI                         = 0x2f
-	IFT_HIPPIINTERFACE                = 0x39
-	IFT_HOSTPAD                       = 0x5a
-	IFT_HSSI                          = 0x2e
-	IFT_HY                            = 0xe
-	IFT_IBM370PARCHAN                 = 0x48
-	IFT_IDSL                          = 0x9a
-	IFT_IEEE80211                     = 0x47
-	IFT_IEEE80212                     = 0x37
-	IFT_IEEE8023ADLAG                 = 0xa1
-	IFT_IFGSN                         = 0x91
-	IFT_IMT                           = 0xbe
-	IFT_INTERLEAVE                    = 0x7c
-	IFT_IP                            = 0x7e
-	IFT_IPFORWARD                     = 0x8e
-	IFT_IPOVERATM                     = 0x72
-	IFT_IPOVERCDLC                    = 0x6d
-	IFT_IPOVERCLAW                    = 0x6e
-	IFT_IPSWITCH                      = 0x4e
-	IFT_IPXIP                         = 0xf9
-	IFT_ISDN                          = 0x3f
-	IFT_ISDNBASIC                     = 0x14
-	IFT_ISDNPRIMARY                   = 0x15
-	IFT_ISDNS                         = 0x4b
-	IFT_ISDNU                         = 0x4c
-	IFT_ISO88022LLC                   = 0x29
-	IFT_ISO88023                      = 0x7
-	IFT_ISO88024                      = 0x8
-	IFT_ISO88025                      = 0x9
-	IFT_ISO88025CRFPINT               = 0x62
-	IFT_ISO88025DTR                   = 0x56
-	IFT_ISO88025FIBER                 = 0x73
-	IFT_ISO88026                      = 0xa
-	IFT_ISUP                          = 0xb3
-	IFT_L3IPXVLAN                     = 0x89
-	IFT_LAPB                          = 0x10
-	IFT_LAPD                          = 0x4d
-	IFT_LAPF                          = 0x77
-	IFT_LOCALTALK                     = 0x2a
-	IFT_LOOP                          = 0x18
-	IFT_MEDIAMAILOVERIP               = 0x8b
-	IFT_MFSIGLINK                     = 0xa7
-	IFT_MIOX25                        = 0x26
-	IFT_MODEM                         = 0x30
-	IFT_MPC                           = 0x71
-	IFT_MPLS                          = 0xa6
-	IFT_MPLSTUNNEL                    = 0x96
-	IFT_MSDSL                         = 0x8f
-	IFT_MVL                           = 0xbf
-	IFT_MYRINET                       = 0x63
-	IFT_NFAS                          = 0xaf
-	IFT_NSIP                          = 0x1b
-	IFT_OPTICALCHANNEL                = 0xc3
-	IFT_OPTICALTRANSPORT              = 0xc4
-	IFT_OTHER                         = 0x1
-	IFT_P10                           = 0xc
-	IFT_P80                           = 0xd
-	IFT_PARA                          = 0x22
-	IFT_PFLOG                         = 0xf6
-	IFT_PFSYNC                        = 0xf7
-	IFT_PLC                           = 0xae
-	IFT_POS                           = 0xab
-	IFT_PPPMULTILINKBUNDLE            = 0x6c
-	IFT_PROPBWAP2MP                   = 0xb8
-	IFT_PROPCNLS                      = 0x59
-	IFT_PROPDOCSWIRELESSDOWNSTREAM    = 0xb5
-	IFT_PROPDOCSWIRELESSMACLAYER      = 0xb4
-	IFT_PROPDOCSWIRELESSUPSTREAM      = 0xb6
-	IFT_PROPMUX                       = 0x36
-	IFT_PROPWIRELESSP2P               = 0x9d
-	IFT_PTPSERIAL                     = 0x16
-	IFT_PVC                           = 0xf1
-	IFT_QLLC                          = 0x44
-	IFT_RADIOMAC                      = 0xbc
-	IFT_RADSL                         = 0x5f
-	IFT_REACHDSL                      = 0xc0
-	IFT_RFC1483                       = 0x9f
-	IFT_RS232                         = 0x21
-	IFT_RSRB                          = 0x4f
-	IFT_SDLC                          = 0x11
-	IFT_SDSL                          = 0x60
-	IFT_SHDSL                         = 0xa9
-	IFT_SIP                           = 0x1f
-	IFT_SLIP                          = 0x1c
-	IFT_SMDSDXI                       = 0x2b
-	IFT_SMDSICIP                      = 0x34
-	IFT_SONET                         = 0x27
-	IFT_SONETOVERHEADCHANNEL          = 0xb9
-	IFT_SONETPATH                     = 0x32
-	IFT_SONETVT                       = 0x33
-	IFT_SRP                           = 0x97
-	IFT_SS7SIGLINK                    = 0x9c
-	IFT_STACKTOSTACK                  = 0x6f
-	IFT_STARLAN                       = 0xb
-	IFT_STF                           = 0xd7
-	IFT_T1                            = 0x12
-	IFT_TDLC                          = 0x74
-	IFT_TERMPAD                       = 0x5b
-	IFT_TR008                         = 0xb0
-	IFT_TRANSPHDLC                    = 0x7b
-	IFT_TUNNEL                        = 0x83
-	IFT_ULTRA                         = 0x1d
-	IFT_USB                           = 0xa0
-	IFT_V11                           = 0x40
-	IFT_V35                           = 0x2d
-	IFT_V36                           = 0x41
-	IFT_V37                           = 0x78
-	IFT_VDSL                          = 0x61
-	IFT_VIRTUALIPADDRESS              = 0x70
-	IFT_VOICEEM                       = 0x64
-	IFT_VOICEENCAP                    = 0x67
-	IFT_VOICEFXO                      = 0x65
-	IFT_VOICEFXS                      = 0x66
-	IFT_VOICEOVERATM                  = 0x98
-	IFT_VOICEOVERFRAMERELAY           = 0x99
-	IFT_VOICEOVERIP                   = 0x68
-	IFT_X213                          = 0x5d
-	IFT_X25                           = 0x5
-	IFT_X25DDN                        = 0x4
-	IFT_X25HUNTGROUP                  = 0x7a
-	IFT_X25MLP                        = 0x79
-	IFT_X25PLE                        = 0x28
-	IFT_XETHER                        = 0x1a
-	IPPROTO_MAXID                     = 0x34
-	IPV6_FAITH                        = 0x1d
-	IPV6_MIN_MEMBERSHIPS              = 0x1f
-	IP_FAITH                          = 0x16
-	IP_MAX_SOURCE_FILTER              = 0x400
-	IP_MIN_MEMBERSHIPS                = 0x1f
-	MAP_NORESERVE                     = 0x40
-	MAP_RENAME                        = 0x20
-	NET_RT_MAXID                      = 0x6
-	RTF_PRCLONING                     = 0x10000
-	RTM_OLDADD                        = 0x9
-	RTM_OLDDEL                        = 0xa
-	RT_CACHING_CONTEXT                = 0x1
-	RT_NORTREF                        = 0x2
-	SIOCADDRT                         = 0x8030720a
-	SIOCALIFADDR                      = 0x8118691b
-	SIOCDELRT                         = 0x8030720b
-	SIOCDLIFADDR                      = 0x8118691d
-	SIOCGLIFADDR                      = 0xc118691c
-	SIOCGLIFPHYADDR                   = 0xc118694b
-	SIOCSLIFPHYADDR                   = 0x8118694a
-)

vendor/golang.org/x/sys/unix/errors_freebsd_amd64.go

@@ -1,233 +0,0 @@
-// Copyright 2017 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// Constants that were deprecated or moved to enums in the FreeBSD headers. Keep
-// them here for backwards compatibility.
-
-package unix
-
-const (
-	DLT_HHDLC                         = 0x79
-	IFF_SMART                         = 0x20
-	IFT_1822                          = 0x2
-	IFT_A12MPPSWITCH                  = 0x82
-	IFT_AAL2                          = 0xbb
-	IFT_AAL5                          = 0x31
-	IFT_ADSL                          = 0x5e
-	IFT_AFLANE8023                    = 0x3b
-	IFT_AFLANE8025                    = 0x3c
-	IFT_ARAP                          = 0x58
-	IFT_ARCNET                        = 0x23
-	IFT_ARCNETPLUS                    = 0x24
-	IFT_ASYNC                         = 0x54
-	IFT_ATM                           = 0x25
-	IFT_ATMDXI                        = 0x69
-	IFT_ATMFUNI                       = 0x6a
-	IFT_ATMIMA                        = 0x6b
-	IFT_ATMLOGICAL                    = 0x50
-	IFT_ATMRADIO                      = 0xbd
-	IFT_ATMSUBINTERFACE               = 0x86
-	IFT_ATMVCIENDPT                   = 0xc2
-	IFT_ATMVIRTUAL                    = 0x95
-	IFT_BGPPOLICYACCOUNTING           = 0xa2
-	IFT_BSC                           = 0x53
-	IFT_CCTEMUL                       = 0x3d
-	IFT_CEPT                          = 0x13
-	IFT_CES                           = 0x85
-	IFT_CHANNEL                       = 0x46
-	IFT_CNR                           = 0x55
-	IFT_COFFEE                        = 0x84
-	IFT_COMPOSITELINK                 = 0x9b
-	IFT_DCN                           = 0x8d
-	IFT_DIGITALPOWERLINE              = 0x8a
-	IFT_DIGITALWRAPPEROVERHEADCHANNEL = 0xba
-	IFT_DLSW                          = 0x4a
-	IFT_DOCSCABLEDOWNSTREAM           = 0x80
-	IFT_DOCSCABLEMACLAYER             = 0x7f
-	IFT_DOCSCABLEUPSTREAM             = 0x81
-	IFT_DS0                           = 0x51
-	IFT_DS0BUNDLE                     = 0x52
-	IFT_DS1FDL                        = 0xaa
-	IFT_DS3                           = 0x1e
-	IFT_DTM                           = 0x8c
-	IFT_DVBASILN                      = 0xac
-	IFT_DVBASIOUT                     = 0xad
-	IFT_DVBRCCDOWNSTREAM              = 0x93
-	IFT_DVBRCCMACLAYER                = 0x92
-	IFT_DVBRCCUPSTREAM                = 0x94
-	IFT_ENC                           = 0xf4
-	IFT_EON                           = 0x19
-	IFT_EPLRS                         = 0x57
-	IFT_ESCON                         = 0x49
-	IFT_ETHER                         = 0x6
-	IFT_FAITH                         = 0xf2
-	IFT_FAST                          = 0x7d
-	IFT_FASTETHER                     = 0x3e
-	IFT_FASTETHERFX                   = 0x45
-	IFT_FDDI                          = 0xf
-	IFT_FIBRECHANNEL                  = 0x38
-	IFT_FRAMERELAYINTERCONNECT        = 0x3a
-	IFT_FRAMERELAYMPI                 = 0x5c
-	IFT_FRDLCIENDPT                   = 0xc1
-	IFT_FRELAY                        = 0x20
-	IFT_FRELAYDCE                     = 0x2c
-	IFT_FRF16MFRBUNDLE                = 0xa3
-	IFT_FRFORWARD                     = 0x9e
-	IFT_G703AT2MB                     = 0x43
-	IFT_G703AT64K                     = 0x42
-	IFT_GIF                           = 0xf0
-	IFT_GIGABITETHERNET               = 0x75
-	IFT_GR303IDT                      = 0xb2
-	IFT_GR303RDT                      = 0xb1
-	IFT_H323GATEKEEPER                = 0xa4
-	IFT_H323PROXY                     = 0xa5
-	IFT_HDH1822                       = 0x3
-	IFT_HDLC                          = 0x76
-	IFT_HDSL2                         = 0xa8
-	IFT_HIPERLAN2                     = 0xb7
-	IFT_HIPPI                         = 0x2f
-	IFT_HIPPIINTERFACE                = 0x39
-	IFT_HOSTPAD                       = 0x5a
-	IFT_HSSI                          = 0x2e
-	IFT_HY                            = 0xe
-	IFT_IBM370PARCHAN                 = 0x48
-	IFT_IDSL                          = 0x9a
-	IFT_IEEE80211                     = 0x47
-	IFT_IEEE80212                     = 0x37
-	IFT_IEEE8023ADLAG                 = 0xa1
-	IFT_IFGSN                         = 0x91
-	IFT_IMT                           = 0xbe
-	IFT_INTERLEAVE                    = 0x7c
-	IFT_IP                            = 0x7e
-	IFT_IPFORWARD                     = 0x8e
-	IFT_IPOVERATM                     = 0x72
-	IFT_IPOVERCDLC                    = 0x6d
-	IFT_IPOVERCLAW                    = 0x6e
-	IFT_IPSWITCH                      = 0x4e
-	IFT_IPXIP                         = 0xf9
-	IFT_ISDN                          = 0x3f
-	IFT_ISDNBASIC                     = 0x14
-	IFT_ISDNPRIMARY                   = 0x15
-	IFT_ISDNS                         = 0x4b
-	IFT_ISDNU                         = 0x4c
-	IFT_ISO88022LLC                   = 0x29
-	IFT_ISO88023                      = 0x7
-	IFT_ISO88024                      = 0x8
-	IFT_ISO88025                      = 0x9
-	IFT_ISO88025CRFPINT               = 0x62
-	IFT_ISO88025DTR                   = 0x56
-	IFT_ISO88025FIBER                 = 0x73
-	IFT_ISO88026                      = 0xa
-	IFT_ISUP                          = 0xb3
-	IFT_L3IPXVLAN                     = 0x89
-	IFT_LAPB                          = 0x10
-	IFT_LAPD                          = 0x4d
-	IFT_LAPF                          = 0x77
-	IFT_LOCALTALK                     = 0x2a
-	IFT_LOOP                          = 0x18
-	IFT_MEDIAMAILOVERIP               = 0x8b
-	IFT_MFSIGLINK                     = 0xa7
-	IFT_MIOX25                        = 0x26
-	IFT_MODEM                         = 0x30
-	IFT_MPC                           = 0x71
-	IFT_MPLS                          = 0xa6
-	IFT_MPLSTUNNEL                    = 0x96
-	IFT_MSDSL                         = 0x8f
-	IFT_MVL                           = 0xbf
-	IFT_MYRINET                       = 0x63
-	IFT_NFAS                          = 0xaf
-	IFT_NSIP                          = 0x1b
-	IFT_OPTICALCHANNEL                = 0xc3
-	IFT_OPTICALTRANSPORT              = 0xc4
-	IFT_OTHER                         = 0x1
-	IFT_P10                           = 0xc
-	IFT_P80                           = 0xd
-	IFT_PARA                          = 0x22
-	IFT_PFLOG                         = 0xf6
-	IFT_PFSYNC                        = 0xf7
-	IFT_PLC                           = 0xae
-	IFT_POS                           = 0xab
-	IFT_PPPMULTILINKBUNDLE            = 0x6c
-	IFT_PROPBWAP2MP                   = 0xb8
-	IFT_PROPCNLS                      = 0x59
-	IFT_PROPDOCSWIRELESSDOWNSTREAM    = 0xb5
-	IFT_PROPDOCSWIRELESSMACLAYER      = 0xb4
-	IFT_PROPDOCSWIRELESSUPSTREAM      = 0xb6
-	IFT_PROPMUX                       = 0x36
-	IFT_PROPWIRELESSP2P               = 0x9d
-	IFT_PTPSERIAL                     = 0x16
-	IFT_PVC                           = 0xf1
-	IFT_QLLC                          = 0x44
-	IFT_RADIOMAC                      = 0xbc
-	IFT_RADSL                         = 0x5f
-	IFT_REACHDSL                      = 0xc0
-	IFT_RFC1483                       = 0x9f
-	IFT_RS232                         = 0x21
-	IFT_RSRB                          = 0x4f
-	IFT_SDLC                          = 0x11
-	IFT_SDSL                          = 0x60
-	IFT_SHDSL                         = 0xa9
-	IFT_SIP                           = 0x1f
-	IFT_SLIP                          = 0x1c
-	IFT_SMDSDXI                       = 0x2b
-	IFT_SMDSICIP                      = 0x34
-	IFT_SONET                         = 0x27
-	IFT_SONETOVERHEADCHANNEL          = 0xb9
-	IFT_SONETPATH                     = 0x32
-	IFT_SONETVT                       = 0x33
-	IFT_SRP                           = 0x97
-	IFT_SS7SIGLINK                    = 0x9c
-	IFT_STACKTOSTACK                  = 0x6f
-	IFT_STARLAN                       = 0xb
-	IFT_STF                           = 0xd7
-	IFT_T1                            = 0x12
-	IFT_TDLC                          = 0x74
-	IFT_TERMPAD                       = 0x5b
-	IFT_TR008                         = 0xb0
-	IFT_TRANSPHDLC                    = 0x7b
-	IFT_TUNNEL                        = 0x83
-	IFT_ULTRA                         = 0x1d
-	IFT_USB                           = 0xa0
-	IFT_V11                           = 0x40
-	IFT_V35                           = 0x2d
-	IFT_V36                           = 0x41
-	IFT_V37                           = 0x78
-	IFT_VDSL                          = 0x61
-	IFT_VIRTUALIPADDRESS              = 0x70
-	IFT_VOICEEM                       = 0x64
-	IFT_VOICEENCAP                    = 0x67
-	IFT_VOICEFXO                      = 0x65
-	IFT_VOICEFXS                      = 0x66
-	IFT_VOICEOVERATM                  = 0x98
-	IFT_VOICEOVERFRAMERELAY           = 0x99
-	IFT_VOICEOVERIP                   = 0x68
-	IFT_X213                          = 0x5d
-	IFT_X25                           = 0x5
-	IFT_X25DDN                        = 0x4
-	IFT_X25HUNTGROUP                  = 0x7a
-	IFT_X25MLP                        = 0x79
-	IFT_X25PLE                        = 0x28
-	IFT_XETHER                        = 0x1a
-	IPPROTO_MAXID                     = 0x34
-	IPV6_FAITH                        = 0x1d
-	IPV6_MIN_MEMBERSHIPS              = 0x1f
-	IP_FAITH                          = 0x16
-	IP_MAX_SOURCE_FILTER              = 0x400
-	IP_MIN_MEMBERSHIPS                = 0x1f
-	MAP_NORESERVE                     = 0x40
-	MAP_RENAME                        = 0x20
-	NET_RT_MAXID                      = 0x6
-	RTF_PRCLONING                     = 0x10000
-	RTM_OLDADD                        = 0x9
-	RTM_OLDDEL                        = 0xa
-	RT_CACHING_CONTEXT                = 0x1
-	RT_NORTREF                        = 0x2
-	SIOCADDRT                         = 0x8040720a
-	SIOCALIFADDR                      = 0x8118691b
-	SIOCDELRT                         = 0x8040720b
-	SIOCDLIFADDR                      = 0x8118691d
-	SIOCGLIFADDR                      = 0xc118691c
-	SIOCGLIFPHYADDR                   = 0xc118694b
-	SIOCSLIFPHYADDR                   = 0x8118694a
-)

vendor/golang.org/x/sys/unix/errors_freebsd_arm.go

@@ -1,226 +0,0 @@
-// Copyright 2017 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-package unix
-
-const (
-	IFT_1822                          = 0x2
-	IFT_A12MPPSWITCH                  = 0x82
-	IFT_AAL2                          = 0xbb
-	IFT_AAL5                          = 0x31
-	IFT_ADSL                          = 0x5e
-	IFT_AFLANE8023                    = 0x3b
-	IFT_AFLANE8025                    = 0x3c
-	IFT_ARAP                          = 0x58
-	IFT_ARCNET                        = 0x23
-	IFT_ARCNETPLUS                    = 0x24
-	IFT_ASYNC                         = 0x54
-	IFT_ATM                           = 0x25
-	IFT_ATMDXI                        = 0x69
-	IFT_ATMFUNI                       = 0x6a
-	IFT_ATMIMA                        = 0x6b
-	IFT_ATMLOGICAL                    = 0x50
-	IFT_ATMRADIO                      = 0xbd
-	IFT_ATMSUBINTERFACE               = 0x86
-	IFT_ATMVCIENDPT                   = 0xc2
-	IFT_ATMVIRTUAL                    = 0x95
-	IFT_BGPPOLICYACCOUNTING           = 0xa2
-	IFT_BSC                           = 0x53
-	IFT_CCTEMUL                       = 0x3d
-	IFT_CEPT                          = 0x13
-	IFT_CES                           = 0x85
-	IFT_CHANNEL                       = 0x46
-	IFT_CNR                           = 0x55
-	IFT_COFFEE                        = 0x84
-	IFT_COMPOSITELINK                 = 0x9b
-	IFT_DCN                           = 0x8d
-	IFT_DIGITALPOWERLINE              = 0x8a
-	IFT_DIGITALWRAPPEROVERHEADCHANNEL = 0xba
-	IFT_DLSW                          = 0x4a
-	IFT_DOCSCABLEDOWNSTREAM           = 0x80
-	IFT_DOCSCABLEMACLAYER             = 0x7f
-	IFT_DOCSCABLEUPSTREAM             = 0x81
-	IFT_DS0                           = 0x51
-	IFT_DS0BUNDLE                     = 0x52
-	IFT_DS1FDL                        = 0xaa
-	IFT_DS3                           = 0x1e
-	IFT_DTM                           = 0x8c
-	IFT_DVBASILN                      = 0xac
-	IFT_DVBASIOUT                     = 0xad
-	IFT_DVBRCCDOWNSTREAM              = 0x93
-	IFT_DVBRCCMACLAYER                = 0x92
-	IFT_DVBRCCUPSTREAM                = 0x94
-	IFT_ENC                           = 0xf4
-	IFT_EON                           = 0x19
-	IFT_EPLRS                         = 0x57
-	IFT_ESCON                         = 0x49
-	IFT_ETHER                         = 0x6
-	IFT_FAST                          = 0x7d
-	IFT_FASTETHER                     = 0x3e
-	IFT_FASTETHERFX                   = 0x45
-	IFT_FDDI                          = 0xf
-	IFT_FIBRECHANNEL                  = 0x38
-	IFT_FRAMERELAYINTERCONNECT        = 0x3a
-	IFT_FRAMERELAYMPI                 = 0x5c
-	IFT_FRDLCIENDPT                   = 0xc1
-	IFT_FRELAY                        = 0x20
-	IFT_FRELAYDCE                     = 0x2c
-	IFT_FRF16MFRBUNDLE                = 0xa3
-	IFT_FRFORWARD                     = 0x9e
-	IFT_G703AT2MB                     = 0x43
-	IFT_G703AT64K                     = 0x42
-	IFT_GIF                           = 0xf0
-	IFT_GIGABITETHERNET               = 0x75
-	IFT_GR303IDT                      = 0xb2
-	IFT_GR303RDT                      = 0xb1
-	IFT_H323GATEKEEPER                = 0xa4
-	IFT_H323PROXY                     = 0xa5
-	IFT_HDH1822                       = 0x3
-	IFT_HDLC                          = 0x76
-	IFT_HDSL2                         = 0xa8
-	IFT_HIPERLAN2                     = 0xb7
-	IFT_HIPPI                         = 0x2f
-	IFT_HIPPIINTERFACE                = 0x39
-	IFT_HOSTPAD                       = 0x5a
-	IFT_HSSI                          = 0x2e
-	IFT_HY                            = 0xe
-	IFT_IBM370PARCHAN                 = 0x48
-	IFT_IDSL                          = 0x9a
-	IFT_IEEE80211                     = 0x47
-	IFT_IEEE80212                     = 0x37
-	IFT_IEEE8023ADLAG                 = 0xa1
-	IFT_IFGSN                         = 0x91
-	IFT_IMT                           = 0xbe
-	IFT_INTERLEAVE                    = 0x7c
-	IFT_IP                            = 0x7e
-	IFT_IPFORWARD                     = 0x8e
-	IFT_IPOVERATM                     = 0x72
-	IFT_IPOVERCDLC                    = 0x6d
-	IFT_IPOVERCLAW                    = 0x6e
-	IFT_IPSWITCH                      = 0x4e
-	IFT_ISDN                          = 0x3f
-	IFT_ISDNBASIC                     = 0x14
-	IFT_ISDNPRIMARY                   = 0x15
-	IFT_ISDNS                         = 0x4b
-	IFT_ISDNU                         = 0x4c
-	IFT_ISO88022LLC                   = 0x29
-	IFT_ISO88023                      = 0x7
-	IFT_ISO88024                      = 0x8
-	IFT_ISO88025                      = 0x9
-	IFT_ISO88025CRFPINT               = 0x62
-	IFT_ISO88025DTR                   = 0x56
-	IFT_ISO88025FIBER                 = 0x73
-	IFT_ISO88026                      = 0xa
-	IFT_ISUP                          = 0xb3
-	IFT_L3IPXVLAN                     = 0x89
-	IFT_LAPB                          = 0x10
-	IFT_LAPD                          = 0x4d
-	IFT_LAPF                          = 0x77
-	IFT_LOCALTALK                     = 0x2a
-	IFT_LOOP                          = 0x18
-	IFT_MEDIAMAILOVERIP               = 0x8b
-	IFT_MFSIGLINK                     = 0xa7
-	IFT_MIOX25                        = 0x26
-	IFT_MODEM                         = 0x30
-	IFT_MPC                           = 0x71
-	IFT_MPLS                          = 0xa6
-	IFT_MPLSTUNNEL                    = 0x96
-	IFT_MSDSL                         = 0x8f
-	IFT_MVL                           = 0xbf
-	IFT_MYRINET                       = 0x63
-	IFT_NFAS                          = 0xaf
-	IFT_NSIP                          = 0x1b
-	IFT_OPTICALCHANNEL                = 0xc3
-	IFT_OPTICALTRANSPORT              = 0xc4
-	IFT_OTHER                         = 0x1
-	IFT_P10                           = 0xc
-	IFT_P80                           = 0xd
-	IFT_PARA                          = 0x22
-	IFT_PFLOG                         = 0xf6
-	IFT_PFSYNC                        = 0xf7
-	IFT_PLC                           = 0xae
-	IFT_POS                           = 0xab
-	IFT_PPPMULTILINKBUNDLE            = 0x6c
-	IFT_PROPBWAP2MP                   = 0xb8
-	IFT_PROPCNLS                      = 0x59
-	IFT_PROPDOCSWIRELESSDOWNSTREAM    = 0xb5
-	IFT_PROPDOCSWIRELESSMACLAYER      = 0xb4
-	IFT_PROPDOCSWIRELESSUPSTREAM      = 0xb6
-	IFT_PROPMUX                       = 0x36
-	IFT_PROPWIRELESSP2P               = 0x9d
-	IFT_PTPSERIAL                     = 0x16
-	IFT_PVC                           = 0xf1
-	IFT_QLLC                          = 0x44
-	IFT_RADIOMAC                      = 0xbc
-	IFT_RADSL                         = 0x5f
-	IFT_REACHDSL                      = 0xc0
-	IFT_RFC1483                       = 0x9f
-	IFT_RS232                         = 0x21
-	IFT_RSRB                          = 0x4f
-	IFT_SDLC                          = 0x11
-	IFT_SDSL                          = 0x60
-	IFT_SHDSL                         = 0xa9
-	IFT_SIP                           = 0x1f
-	IFT_SLIP                          = 0x1c
-	IFT_SMDSDXI                       = 0x2b
-	IFT_SMDSICIP                      = 0x34
-	IFT_SONET                         = 0x27
-	IFT_SONETOVERHEADCHANNEL          = 0xb9
-	IFT_SONETPATH                     = 0x32
-	IFT_SONETVT                       = 0x33
-	IFT_SRP                           = 0x97
-	IFT_SS7SIGLINK                    = 0x9c
-	IFT_STACKTOSTACK                  = 0x6f
-	IFT_STARLAN                       = 0xb
-	IFT_STF                           = 0xd7
-	IFT_T1                            = 0x12
-	IFT_TDLC                          = 0x74
-	IFT_TERMPAD                       = 0x5b
-	IFT_TR008                         = 0xb0
-	IFT_TRANSPHDLC                    = 0x7b
-	IFT_TUNNEL                        = 0x83
-	IFT_ULTRA                         = 0x1d
-	IFT_USB                           = 0xa0
-	IFT_V11                           = 0x40
-	IFT_V35                           = 0x2d
-	IFT_V36                           = 0x41
-	IFT_V37                           = 0x78
-	IFT_VDSL                          = 0x61
-	IFT_VIRTUALIPADDRESS              = 0x70
-	IFT_VOICEEM                       = 0x64
-	IFT_VOICEENCAP                    = 0x67
-	IFT_VOICEFXO                      = 0x65
-	IFT_VOICEFXS                      = 0x66
-	IFT_VOICEOVERATM                  = 0x98
-	IFT_VOICEOVERFRAMERELAY           = 0x99
-	IFT_VOICEOVERIP                   = 0x68
-	IFT_X213                          = 0x5d
-	IFT_X25                           = 0x5
-	IFT_X25DDN                        = 0x4
-	IFT_X25HUNTGROUP                  = 0x7a
-	IFT_X25MLP                        = 0x79
-	IFT_X25PLE                        = 0x28
-	IFT_XETHER                        = 0x1a
-
-	// missing constants on FreeBSD-11.1-RELEASE, copied from old values in ztypes_freebsd_arm.go
-	IFF_SMART       = 0x20
-	IFT_FAITH       = 0xf2
-	IFT_IPXIP       = 0xf9
-	IPPROTO_MAXID   = 0x34
-	IPV6_FAITH      = 0x1d
-	IP_FAITH        = 0x16
-	MAP_NORESERVE   = 0x40
-	MAP_RENAME      = 0x20
-	NET_RT_MAXID    = 0x6
-	RTF_PRCLONING   = 0x10000
-	RTM_OLDADD      = 0x9
-	RTM_OLDDEL      = 0xa
-	SIOCADDRT       = 0x8030720a
-	SIOCALIFADDR    = 0x8118691b
-	SIOCDELRT       = 0x8030720b
-	SIOCDLIFADDR    = 0x8118691d
-	SIOCGLIFADDR    = 0xc118691c
-	SIOCGLIFPHYADDR = 0xc118694b
-	SIOCSLIFPHYADDR = 0x8118694a
-)

vendor/golang.org/x/sys/unix/errors_freebsd_arm64.go

@@ -1,17 +0,0 @@
-// Copyright 2020 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-// Constants that were deprecated or moved to enums in the FreeBSD headers. Keep
-// them here for backwards compatibility.
-
-package unix
-
-const (
-	DLT_HHDLC            = 0x79
-	IPV6_MIN_MEMBERSHIPS = 0x1f
-	IP_MAX_SOURCE_FILTER = 0x400
-	IP_MIN_MEMBERSHIPS   = 0x1f
-	RT_CACHING_CONTEXT   = 0x1
-	RT_NORTREF           = 0x2
-)

vendor/golang.org/x/sys/unix/fcntl.go

@@ -2,8 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build dragonfly || freebsd || linux || netbsd || openbsd
-// +build dragonfly freebsd linux netbsd openbsd
+//go:build dragonfly || freebsd || linux || netbsd
 
 package unix
 

vendor/golang.org/x/sys/unix/fcntl_linux_32bit.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build (linux && 386) || (linux && arm) || (linux && mips) || (linux && mipsle) || (linux && ppc)
-// +build linux,386 linux,arm linux,mips linux,mipsle linux,ppc
 
 package unix
 

vendor/golang.org/x/sys/unix/fdset.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris || zos
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris zos
 
 package unix
 

vendor/golang.org/x/sys/unix/fstatfs_zos.go

@@ -1,164 +0,0 @@
-// Copyright 2020 The Go Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-//go:build zos && s390x
-// +build zos,s390x
-
-package unix
-
-import (
-	"unsafe"
-)
-
-// This file simulates fstatfs on z/OS using fstatvfs and w_getmntent.
-
-func Fstatfs(fd int, stat *Statfs_t) (err error) {
-	var stat_v Statvfs_t
-	err = Fstatvfs(fd, &stat_v)
-	if err == nil {
-		// populate stat
-		stat.Type = 0
-		stat.Bsize = stat_v.Bsize
-		stat.Blocks = stat_v.Blocks
-		stat.Bfree = stat_v.Bfree
-		stat.Bavail = stat_v.Bavail
-		stat.Files = stat_v.Files
-		stat.Ffree = stat_v.Ffree
-		stat.Fsid = stat_v.Fsid
-		stat.Namelen = stat_v.Namemax
-		stat.Frsize = stat_v.Frsize
-		stat.Flags = stat_v.Flag
-		for passn := 0; passn < 5; passn++ {
-			switch passn {
-			case 0:
-				err = tryGetmntent64(stat)
-				break
-			case 1:
-				err = tryGetmntent128(stat)
-				break
-			case 2:
-				err = tryGetmntent256(stat)
-				break
-			case 3:
-				err = tryGetmntent512(stat)
-				break
-			case 4:
-				err = tryGetmntent1024(stat)
-				break
-			default:
-				break
-			}
-			//proceed to return if: err is nil (found), err is nonnil but not ERANGE (another error occurred)
-			if err == nil || err != nil && err != ERANGE {
-				break
-			}
-		}
-	}
-	return err
-}
-
-func tryGetmntent64(stat *Statfs_t) (err error) {
-	var mnt_ent_buffer struct {
-		header       W_Mnth
-		filesys_info [64]W_Mntent
-	}
-	var buffer_size int = int(unsafe.Sizeof(mnt_ent_buffer))
-	fs_count, err := W_Getmntent((*byte)(unsafe.Pointer(&mnt_ent_buffer)), buffer_size)
-	if err != nil {
-		return err
-	}
-	err = ERANGE //return ERANGE if no match is found in this batch
-	for i := 0; i < fs_count; i++ {
-		if stat.Fsid == uint64(mnt_ent_buffer.filesys_info[i].Dev) {
-			stat.Type = uint32(mnt_ent_buffer.filesys_info[i].Fstname[0])
-			err = nil
-			break
-		}
-	}
-	return err
-}
-
-func tryGetmntent128(stat *Statfs_t) (err error) {
-	var mnt_ent_buffer struct {
-		header       W_Mnth
-		filesys_info [128]W_Mntent
-	}
-	var buffer_size int = int(unsafe.Sizeof(mnt_ent_buffer))
-	fs_count, err := W_Getmntent((*byte)(unsafe.Pointer(&mnt_ent_buffer)), buffer_size)
-	if err != nil {
-		return err
-	}
-	err = ERANGE //return ERANGE if no match is found in this batch
-	for i := 0; i < fs_count; i++ {
-		if stat.Fsid == uint64(mnt_ent_buffer.filesys_info[i].Dev) {
-			stat.Type = uint32(mnt_ent_buffer.filesys_info[i].Fstname[0])
-			err = nil
-			break
-		}
-	}
-	return err
-}
-
-func tryGetmntent256(stat *Statfs_t) (err error) {
-	var mnt_ent_buffer struct {
-		header       W_Mnth
-		filesys_info [256]W_Mntent
-	}
-	var buffer_size int = int(unsafe.Sizeof(mnt_ent_buffer))
-	fs_count, err := W_Getmntent((*byte)(unsafe.Pointer(&mnt_ent_buffer)), buffer_size)
-	if err != nil {
-		return err
-	}
-	err = ERANGE //return ERANGE if no match is found in this batch
-	for i := 0; i < fs_count; i++ {
-		if stat.Fsid == uint64(mnt_ent_buffer.filesys_info[i].Dev) {
-			stat.Type = uint32(mnt_ent_buffer.filesys_info[i].Fstname[0])
-			err = nil
-			break
-		}
-	}
-	return err
-}
-
-func tryGetmntent512(stat *Statfs_t) (err error) {
-	var mnt_ent_buffer struct {
-		header       W_Mnth
-		filesys_info [512]W_Mntent
-	}
-	var buffer_size int = int(unsafe.Sizeof(mnt_ent_buffer))
-	fs_count, err := W_Getmntent((*byte)(unsafe.Pointer(&mnt_ent_buffer)), buffer_size)
-	if err != nil {
-		return err
-	}
-	err = ERANGE //return ERANGE if no match is found in this batch
-	for i := 0; i < fs_count; i++ {
-		if stat.Fsid == uint64(mnt_ent_buffer.filesys_info[i].Dev) {
-			stat.Type = uint32(mnt_ent_buffer.filesys_info[i].Fstname[0])
-			err = nil
-			break
-		}
-	}
-	return err
-}
-
-func tryGetmntent1024(stat *Statfs_t) (err error) {
-	var mnt_ent_buffer struct {
-		header       W_Mnth
-		filesys_info [1024]W_Mntent
-	}
-	var buffer_size int = int(unsafe.Sizeof(mnt_ent_buffer))
-	fs_count, err := W_Getmntent((*byte)(unsafe.Pointer(&mnt_ent_buffer)), buffer_size)
-	if err != nil {
-		return err
-	}
-	err = ERANGE //return ERANGE if no match is found in this batch
-	for i := 0; i < fs_count; i++ {
-		if stat.Fsid == uint64(mnt_ent_buffer.filesys_info[i].Dev) {
-			stat.Type = uint32(mnt_ent_buffer.filesys_info[i].Fstname[0])
-			err = nil
-			break
-		}
-	}
-	return err
-}

vendor/golang.org/x/sys/unix/gccgo.go

@@ -2,8 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build gccgo && !aix
-// +build gccgo,!aix
+//go:build gccgo && !aix && !hurd
 
 package unix
 

vendor/golang.org/x/sys/unix/gccgo_c.c

@@ -2,8 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build gccgo
-// +build !aix
+//go:build gccgo && !aix && !hurd
 
 #include <errno.h>
 #include <stdint.h>

vendor/golang.org/x/sys/unix/gccgo_linux_amd64.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build gccgo && linux && amd64
-// +build gccgo,linux,amd64
 
 package unix
 

vendor/golang.org/x/sys/unix/ifreq_linux.go

@@ -3,12 +3,10 @@
 // license that can be found in the LICENSE file.
 
 //go:build linux
-// +build linux
 
 package unix
 
 import (
-	"bytes"
 	"unsafe"
 )
 
@@ -45,13 +43,7 @@ func NewIfreq(name string) (*Ifreq, error) {
 
 // Name returns the interface name associated with the Ifreq.
 func (ifr *Ifreq) Name() string {
-	// BytePtrToString requires a NULL terminator or the program may crash. If
-	// one is not present, just return the empty string.
-	if !bytes.Contains(ifr.raw.Ifrn[:], []byte{0x00}) {
-		return ""
-	}
-
-	return BytePtrToString(&ifr.raw.Ifrn[0])
+	return ByteSliceToString(ifr.raw.Ifrn[:])
 }
 
 // According to netdevice(7), only AF_INET addresses are returned for numerous

vendor/golang.org/x/sys/unix/ioctl_linux.go

@@ -4,9 +4,7 @@
 
 package unix
 
-import (
-	"unsafe"
-)
+import "unsafe"
 
 // IoctlRetInt performs an ioctl operation specified by req on a device
 // associated with opened file descriptor fd, and returns a non-negative
@@ -194,3 +192,47 @@ func ioctlIfreqData(fd int, req uint, value *ifreqData) error {
 	// identical so pass *IfreqData directly.
 	return ioctlPtr(fd, req, unsafe.Pointer(value))
 }
+
+// IoctlKCMClone attaches a new file descriptor to a multiplexor by cloning an
+// existing KCM socket, returning a structure containing the file descriptor of
+// the new socket.
+func IoctlKCMClone(fd int) (*KCMClone, error) {
+	var info KCMClone
+	if err := ioctlPtr(fd, SIOCKCMCLONE, unsafe.Pointer(&info)); err != nil {
+		return nil, err
+	}
+
+	return &info, nil
+}
+
+// IoctlKCMAttach attaches a TCP socket and associated BPF program file
+// descriptor to a multiplexor.
+func IoctlKCMAttach(fd int, info KCMAttach) error {
+	return ioctlPtr(fd, SIOCKCMATTACH, unsafe.Pointer(&info))
+}
+
+// IoctlKCMUnattach unattaches a TCP socket file descriptor from a multiplexor.
+func IoctlKCMUnattach(fd int, info KCMUnattach) error {
+	return ioctlPtr(fd, SIOCKCMUNATTACH, unsafe.Pointer(&info))
+}
+
+// IoctlLoopGetStatus64 gets the status of the loop device associated with the
+// file descriptor fd using the LOOP_GET_STATUS64 operation.
+func IoctlLoopGetStatus64(fd int) (*LoopInfo64, error) {
+	var value LoopInfo64
+	if err := ioctlPtr(fd, LOOP_GET_STATUS64, unsafe.Pointer(&value)); err != nil {
+		return nil, err
+	}
+	return &value, nil
+}
+
+// IoctlLoopSetStatus64 sets the status of the loop device associated with the
+// file descriptor fd using the LOOP_SET_STATUS64 operation.
+func IoctlLoopSetStatus64(fd int, value *LoopInfo64) error {
+	return ioctlPtr(fd, LOOP_SET_STATUS64, unsafe.Pointer(value))
+}
+
+// IoctlLoopConfigure configures all loop device parameters in a single step
+func IoctlLoopConfigure(fd int, value *LoopConfig) error {
+	return ioctlPtr(fd, LOOP_CONFIGURE, unsafe.Pointer(value))
+}

vendor/golang.org/x/sys/unix/ioctl_signed.go

@@ -0,0 +1,69 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build aix || solaris
+
+package unix
+
+import (
+	"unsafe"
+)
+
+// ioctl itself should not be exposed directly, but additional get/set
+// functions for specific types are permissible.
+
+// IoctlSetInt performs an ioctl operation which sets an integer value
+// on fd, using the specified request number.
+func IoctlSetInt(fd int, req int, value int) error {
+	return ioctl(fd, req, uintptr(value))
+}
+
+// IoctlSetPointerInt performs an ioctl operation which sets an
+// integer value on fd, using the specified request number. The ioctl
+// argument is called with a pointer to the integer value, rather than
+// passing the integer value directly.
+func IoctlSetPointerInt(fd int, req int, value int) error {
+	v := int32(value)
+	return ioctlPtr(fd, req, unsafe.Pointer(&v))
+}
+
+// IoctlSetWinsize performs an ioctl on fd with a *Winsize argument.
+//
+// To change fd's window size, the req argument should be TIOCSWINSZ.
+func IoctlSetWinsize(fd int, req int, value *Winsize) error {
+	// TODO: if we get the chance, remove the req parameter and
+	// hardcode TIOCSWINSZ.
+	return ioctlPtr(fd, req, unsafe.Pointer(value))
+}
+
+// IoctlSetTermios performs an ioctl on fd with a *Termios.
+//
+// The req value will usually be TCSETA or TIOCSETA.
+func IoctlSetTermios(fd int, req int, value *Termios) error {
+	// TODO: if we get the chance, remove the req parameter.
+	return ioctlPtr(fd, req, unsafe.Pointer(value))
+}
+
+// IoctlGetInt performs an ioctl operation which gets an integer value
+// from fd, using the specified request number.
+//
+// A few ioctl requests use the return value as an output parameter;
+// for those, IoctlRetInt should be used instead of this function.
+func IoctlGetInt(fd int, req int) (int, error) {
+	var value int
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
+	return value, err
+}
+
+func IoctlGetWinsize(fd int, req int) (*Winsize, error) {
+	var value Winsize
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
+	return &value, err
+}
+
+func IoctlGetTermios(fd int, req int) (*Termios, error) {
+	var value Termios
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
+	return &value, err
+}

vendor/golang.org/x/sys/unix/ioctl_unsigned.go

@@ -2,13 +2,11 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-//go:build aix || darwin || dragonfly || freebsd || linux || netbsd || openbsd || solaris
-// +build aix darwin dragonfly freebsd linux netbsd openbsd solaris
+//go:build darwin || dragonfly || freebsd || hurd || linux || netbsd || openbsd
 
 package unix
 
 import (
-	"runtime"
 	"unsafe"
 )
 
@@ -27,7 +25,7 @@ func IoctlSetInt(fd int, req uint, value int) error {
 // passing the integer value directly.
 func IoctlSetPointerInt(fd int, req uint, value int) error {
 	v := int32(value)
-	return ioctl(fd, req, uintptr(unsafe.Pointer(&v)))
+	return ioctlPtr(fd, req, unsafe.Pointer(&v))
 }
 
 // IoctlSetWinsize performs an ioctl on fd with a *Winsize argument.
@@ -36,9 +34,7 @@ func IoctlSetPointerInt(fd int, req uint, value int) error {
 func IoctlSetWinsize(fd int, req uint, value *Winsize) error {
 	// TODO: if we get the chance, remove the req parameter and
 	// hardcode TIOCSWINSZ.
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(value)))
-	runtime.KeepAlive(value)
-	return err
+	return ioctlPtr(fd, req, unsafe.Pointer(value))
 }
 
 // IoctlSetTermios performs an ioctl on fd with a *Termios.
@@ -46,9 +42,7 @@ func IoctlSetWinsize(fd int, req uint, value *Winsize) error {
 // The req value will usually be TCSETA or TIOCSETA.
 func IoctlSetTermios(fd int, req uint, value *Termios) error {
 	// TODO: if we get the chance, remove the req parameter.
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(value)))
-	runtime.KeepAlive(value)
-	return err
+	return ioctlPtr(fd, req, unsafe.Pointer(value))
 }
 
 // IoctlGetInt performs an ioctl operation which gets an integer value
@@ -58,18 +52,18 @@ func IoctlSetTermios(fd int, req uint, value *Termios) error {
 // for those, IoctlRetInt should be used instead of this function.
 func IoctlGetInt(fd int, req uint) (int, error) {
 	var value int
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(&value)))
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
 	return value, err
 }
 
 func IoctlGetWinsize(fd int, req uint) (*Winsize, error) {
 	var value Winsize
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(&value)))
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
 	return &value, err
 }
 
 func IoctlGetTermios(fd int, req uint) (*Termios, error) {
 	var value Termios
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(&value)))
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
 	return &value, err
 }

vendor/golang.org/x/sys/unix/ioctl_zos.go

@@ -3,7 +3,6 @@
 // license that can be found in the LICENSE file.
 
 //go:build zos && s390x
-// +build zos,s390x
 
 package unix
 
@@ -17,25 +16,23 @@ import (
 
 // IoctlSetInt performs an ioctl operation which sets an integer value
 // on fd, using the specified request number.
-func IoctlSetInt(fd int, req uint, value int) error {
+func IoctlSetInt(fd int, req int, value int) error {
 	return ioctl(fd, req, uintptr(value))
 }
 
 // IoctlSetWinsize performs an ioctl on fd with a *Winsize argument.
 //
 // To change fd's window size, the req argument should be TIOCSWINSZ.
-func IoctlSetWinsize(fd int, req uint, value *Winsize) error {
+func IoctlSetWinsize(fd int, req int, value *Winsize) error {
 	// TODO: if we get the chance, remove the req parameter and
 	// hardcode TIOCSWINSZ.
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(value)))
-	runtime.KeepAlive(value)
-	return err
+	return ioctlPtr(fd, req, unsafe.Pointer(value))
 }
 
 // IoctlSetTermios performs an ioctl on fd with a *Termios.
 //
 // The req value is expected to be TCSETS, TCSETSW, or TCSETSF
-func IoctlSetTermios(fd int, req uint, value *Termios) error {
+func IoctlSetTermios(fd int, req int, value *Termios) error {
 	if (req != TCSETS) && (req != TCSETSW) && (req != TCSETSF) {
 		return ENOSYS
 	}
@@ -49,22 +46,22 @@ func IoctlSetTermios(fd int, req uint, value *Termios) error {
 //
 // A few ioctl requests use the return value as an output parameter;
 // for those, IoctlRetInt should be used instead of this function.
-func IoctlGetInt(fd int, req uint) (int, error) {
+func IoctlGetInt(fd int, req int) (int, error) {
 	var value int
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(&value)))
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
 	return value, err
 }
 
-func IoctlGetWinsize(fd int, req uint) (*Winsize, error) {
+func IoctlGetWinsize(fd int, req int) (*Winsize, error) {
 	var value Winsize
-	err := ioctl(fd, req, uintptr(unsafe.Pointer(&value)))
+	err := ioctlPtr(fd, req, unsafe.Pointer(&value))
 	return &value, err
 }
 
 // IoctlGetTermios performs an ioctl on fd with a *Termios.
 //
 // The req value is expected to be TCGETS
-func IoctlGetTermios(fd int, req uint) (*Termios, error) {
+func IoctlGetTermios(fd int, req int) (*Termios, error) {
 	var value Termios
 	if req != TCGETS {
 		return &value, ENOSYS

vendor/golang.org/x/sys/unix/mkall.sh

@@ -50,7 +50,7 @@ if [[ "$GOOS" = "linux" ]]; then
 	# Use the Docker-based build system
 	# Files generated through docker (use $cmd so you can Ctl-C the build or run)
 	$cmd docker build --tag generate:$GOOS $GOOS
-	$cmd docker run --interactive --tty --volume $(cd -- "$(dirname -- "$0")/.." && /bin/pwd):/build generate:$GOOS
+	$cmd docker run --interactive --tty --volume $(cd -- "$(dirname -- "$0")/.." && pwd):/build generate:$GOOS
 	exit
 fi
 
@@ -73,12 +73,12 @@ aix_ppc64)
 darwin_amd64)
 	mkerrors="$mkerrors -m64"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
-	mkasm="go run mkasm_darwin.go"
+	mkasm="go run mkasm.go"
 	;;
 darwin_arm64)
 	mkerrors="$mkerrors -m64"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
-	mkasm="go run mkasm_darwin.go"
+	mkasm="go run mkasm.go"
 	;;
 dragonfly_amd64)
 	mkerrors="$mkerrors -m64"
@@ -89,25 +89,30 @@ dragonfly_amd64)
 freebsd_386)
 	mkerrors="$mkerrors -m32"
 	mksyscall="go run mksyscall.go -l32"
-	mksysnum="go run mksysnum.go 'https://svn.freebsd.org/base/stable/11/sys/kern/syscalls.master'"
+	mksysnum="go run mksysnum.go 'https://cgit.freebsd.org/src/plain/sys/kern/syscalls.master?h=stable/12'"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
 	;;
 freebsd_amd64)
 	mkerrors="$mkerrors -m64"
-	mksysnum="go run mksysnum.go 'https://svn.freebsd.org/base/stable/11/sys/kern/syscalls.master'"
+	mksysnum="go run mksysnum.go 'https://cgit.freebsd.org/src/plain/sys/kern/syscalls.master?h=stable/12'"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
 	;;
 freebsd_arm)
 	mkerrors="$mkerrors"
 	mksyscall="go run mksyscall.go -l32 -arm"
-	mksysnum="go run mksysnum.go 'https://svn.freebsd.org/base/stable/11/sys/kern/syscalls.master'"
+	mksysnum="go run mksysnum.go 'https://cgit.freebsd.org/src/plain/sys/kern/syscalls.master?h=stable/12'"
 	# Let the type of C char be signed for making the bare syscall
 	# API consistent across platforms.
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
 	;;
 freebsd_arm64)
 	mkerrors="$mkerrors -m64"
-	mksysnum="go run mksysnum.go 'https://svn.freebsd.org/base/stable/11/sys/kern/syscalls.master'"
+	mksysnum="go run mksysnum.go 'https://cgit.freebsd.org/src/plain/sys/kern/syscalls.master?h=stable/12'"
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
+	;;
+freebsd_riscv64)
+	mkerrors="$mkerrors -m64"
+	mksysnum="go run mksysnum.go 'https://cgit.freebsd.org/src/plain/sys/kern/syscalls.master?h=stable/12'"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
 	;;
 netbsd_386)
@@ -137,42 +142,60 @@ netbsd_arm64)
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
 	;;
 openbsd_386)
+	mkasm="go run mkasm.go"
 	mkerrors="$mkerrors -m32"
-	mksyscall="go run mksyscall.go -l32 -openbsd"
+	mksyscall="go run mksyscall.go -l32 -openbsd -libc"
 	mksysctl="go run mksysctl_openbsd.go"
-	mksysnum="go run mksysnum.go 'https://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master'"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
 	;;
 openbsd_amd64)
+	mkasm="go run mkasm.go"
 	mkerrors="$mkerrors -m64"
-	mksyscall="go run mksyscall.go -openbsd"
+	mksyscall="go run mksyscall.go -openbsd -libc"
 	mksysctl="go run mksysctl_openbsd.go"
-	mksysnum="go run mksysnum.go 'https://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master'"
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs"
 	;;
 openbsd_arm)
+	mkasm="go run mkasm.go"
 	mkerrors="$mkerrors"
-	mksyscall="go run mksyscall.go -l32 -openbsd -arm"
+	mksyscall="go run mksyscall.go -l32 -openbsd -arm -libc"
 	mksysctl="go run mksysctl_openbsd.go"
-	mksysnum="go run mksysnum.go 'https://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master'"
 	# Let the type of C char be signed for making the bare syscall
 	# API consistent across platforms.
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
 	;;
 openbsd_arm64)
+	mkasm="go run mkasm.go"
 	mkerrors="$mkerrors -m64"
-	mksyscall="go run mksyscall.go -openbsd"
+	mksyscall="go run mksyscall.go -openbsd -libc"
 	mksysctl="go run mksysctl_openbsd.go"
-	mksysnum="go run mksysnum.go 'https://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master'"
 	# Let the type of C char be signed for making the bare syscall
 	# API consistent across platforms.
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
 	;;
 openbsd_mips64)
+	mkasm="go run mkasm.go"
 	mkerrors="$mkerrors -m64"
-	mksyscall="go run mksyscall.go -openbsd"
+	mksyscall="go run mksyscall.go -openbsd -libc"
+	mksysctl="go run mksysctl_openbsd.go"
+	# Let the type of C char be signed for making the bare syscall
+	# API consistent across platforms.
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
+	;;
+openbsd_ppc64)
+	mkasm="go run mkasm.go"
+	mkerrors="$mkerrors -m64"
+	mksyscall="go run mksyscall.go -openbsd -libc"
+	mksysctl="go run mksysctl_openbsd.go"
+	# Let the type of C char be signed for making the bare syscall
+	# API consistent across platforms.
+	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
+	;;
+openbsd_riscv64)
+	mkasm="go run mkasm.go"
+	mkerrors="$mkerrors -m64"
+	mksyscall="go run mksyscall.go -openbsd -libc"
 	mksysctl="go run mksysctl_openbsd.go"
-	mksysnum="go run mksysnum.go 'https://cvsweb.openbsd.org/cgi-bin/cvsweb/~checkout~/src/sys/kern/syscalls.master'"
 	# Let the type of C char be signed for making the bare syscall
 	# API consistent across platforms.
 	mktypes="GOARCH=$GOARCH go tool cgo -godefs -- -fsigned-char"
@@ -209,11 +232,6 @@ esac
 			if [ "$GOOSARCH" == "aix_ppc64" ]; then
 				# aix/ppc64 script generates files instead of writing to stdin.
 				echo "$mksyscall -tags $GOOS,$GOARCH $syscall_goos $GOOSARCH_in && gofmt -w zsyscall_$GOOSARCH.go && gofmt -w zsyscall_"$GOOSARCH"_gccgo.go && gofmt -w zsyscall_"$GOOSARCH"_gc.go " ;
-			elif [ "$GOOS" == "darwin" ]; then
-			        # 1.12 and later, syscalls via libSystem
-				echo "$mksyscall -tags $GOOS,$GOARCH,go1.12 $syscall_goos $GOOSARCH_in |gofmt >zsyscall_$GOOSARCH.go";
-				# 1.13 and later, syscalls via libSystem (including syscallPtr)
-				echo "$mksyscall -tags $GOOS,$GOARCH,go1.13 syscall_darwin.1_13.go |gofmt >zsyscall_$GOOSARCH.1_13.go";
 			elif [ "$GOOS" == "illumos" ]; then
 			        # illumos code generation requires a --illumos switch
 			        echo "$mksyscall -illumos -tags illumos,$GOARCH syscall_illumos.go |gofmt > zsyscall_illumos_$GOARCH.go";
@@ -227,5 +245,5 @@ esac
 	if [ -n "$mksysctl" ]; then echo "$mksysctl |gofmt >$zsysctl"; fi
 	if [ -n "$mksysnum" ]; then echo "$mksysnum |gofmt >zsysnum_$GOOSARCH.go"; fi
 	if [ -n "$mktypes" ]; then echo "$mktypes types_$GOOS.go | go run mkpost.go > ztypes_$GOOSARCH.go"; fi
-	if [ -n "$mkasm" ]; then echo "$mkasm $GOARCH"; fi
+	if [ -n "$mkasm" ]; then echo "$mkasm $GOOS $GOARCH"; fi
 ) | $run

vendor/golang.org/x/sys/unix/mkerrors.sh

@@ -58,6 +58,7 @@ includes_Darwin='
 #define _DARWIN_USE_64_BIT_INODE
 #define __APPLE_USE_RFC_3542
 #include <stdint.h>
+#include <sys/stdio.h>
 #include <sys/attr.h>
 #include <sys/clonefile.h>
 #include <sys/kern_control.h>
@@ -66,6 +67,7 @@ includes_Darwin='
 #include <sys/ptrace.h>
 #include <sys/select.h>
 #include <sys/socket.h>
+#include <sys/stat.h>
 #include <sys/un.h>
 #include <sys/sockio.h>
 #include <sys/sys_domain.h>
@@ -128,6 +130,7 @@ includes_FreeBSD='
 #include <sys/mount.h>
 #include <sys/wait.h>
 #include <sys/ioctl.h>
+#include <sys/ptrace.h>
 #include <net/bpf.h>
 #include <net/if.h>
 #include <net/if_types.h>
@@ -202,9 +205,12 @@ struct ltchars {
 #include <sys/timerfd.h>
 #include <sys/uio.h>
 #include <sys/xattr.h>
+#include <netinet/udp.h>
+#include <linux/audit.h>
 #include <linux/bpf.h>
 #include <linux/can.h>
 #include <linux/can/error.h>
+#include <linux/can/netlink.h>
 #include <linux/can/raw.h>
 #include <linux/capability.h>
 #include <linux/cryptouser.h>
@@ -214,6 +220,7 @@ struct ltchars {
 #include <linux/ethtool_netlink.h>
 #include <linux/falloc.h>
 #include <linux/fanotify.h>
+#include <linux/fib_rules.h>
 #include <linux/filter.h>
 #include <linux/fs.h>
 #include <linux/fscrypt.h>
@@ -231,6 +238,7 @@ struct ltchars {
 #include <linux/if_packet.h>
 #include <linux/if_xdp.h>
 #include <linux/input.h>
+#include <linux/kcm.h>
 #include <linux/kexec.h>
 #include <linux/keyctl.h>
 #include <linux/landlock.h>
@@ -241,6 +249,7 @@ struct ltchars {
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/netfilter/nfnetlink.h>
+#include <linux/netfilter/nf_tables.h>
 #include <linux/netlink.h>
 #include <linux/net_namespace.h>
 #include <linux/nfc.h>
@@ -255,6 +264,7 @@ struct ltchars {
 #include <linux/sched.h>
 #include <linux/seccomp.h>
 #include <linux/serial.h>
+#include <linux/sock_diag.h>
 #include <linux/sockios.h>
 #include <linux/taskstats.h>
 #include <linux/tipc.h>
@@ -276,10 +286,6 @@ struct ltchars {
 #include <asm/termbits.h>
 #endif
 
-#ifndef MSG_FASTOPEN
-#define MSG_FASTOPEN    0x20000000
-#endif
-
 #ifndef PTRACE_GETREGS
 #define PTRACE_GETREGS	0xc
 #endif
@@ -288,10 +294,6 @@ struct ltchars {
 #define PTRACE_SETREGS	0xd
 #endif
 
-#ifndef SOL_NETLINK
-#define SOL_NETLINK	270
-#endif
-
 #ifdef SOL_BLUETOOTH
 // SPARC includes this in /usr/include/sparc64-linux-gnu/bits/socket.h
 // but it is already in bluetooth_linux.go
@@ -308,10 +310,23 @@ struct ltchars {
 #undef TIPC_WAIT_FOREVER
 #define TIPC_WAIT_FOREVER 0xffffffff
 
-// Copied from linux/l2tp.h
-// Including linux/l2tp.h here causes conflicts between linux/in.h
-// and netinet/in.h included via net/route.h above.
-#define IPPROTO_L2TP		115
+// Copied from linux/netfilter/nf_nat.h
+// Including linux/netfilter/nf_nat.h here causes conflicts between linux/in.h
+// and netinet/in.h.
+#define NF_NAT_RANGE_MAP_IPS			(1 << 0)
+#define NF_NAT_RANGE_PROTO_SPECIFIED		(1 << 1)
+#define NF_NAT_RANGE_PROTO_RANDOM		(1 << 2)
+#define NF_NAT_RANGE_PERSISTENT			(1 << 3)
+#define NF_NAT_RANGE_PROTO_RANDOM_FULLY		(1 << 4)
+#define NF_NAT_RANGE_PROTO_OFFSET		(1 << 5)
+#define NF_NAT_RANGE_NETMAP			(1 << 6)
+#define NF_NAT_RANGE_PROTO_RANDOM_ALL		\
+	(NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY)
+#define NF_NAT_RANGE_MASK					\
+	(NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED |	\
+	 NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT |	\
+	 NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET | \
+	 NF_NAT_RANGE_NETMAP)
 
 // Copied from linux/hid.h.
 // Keep in sync with the size of the referenced fields.
@@ -503,14 +518,17 @@ ccflags="$@"
 		$2 ~ /^O?XTABS$/ ||
 		$2 ~ /^TC[IO](ON|OFF)$/ ||
 		$2 ~ /^IN_/ ||
+		$2 ~ /^KCM/ ||
 		$2 ~ /^LANDLOCK_/ ||
 		$2 ~ /^LOCK_(SH|EX|NB|UN)$/ ||
 		$2 ~ /^LO_(KEY|NAME)_SIZE$/ ||
 		$2 ~ /^LOOP_(CLR|CTL|GET|SET)_/ ||
-		$2 ~ /^(AF|SOCK|SO|SOL|IPPROTO|IP|IPV6|TCP|MCAST|EVFILT|NOTE|SHUT|PROT|MAP|MFD|T?PACKET|MSG|SCM|MCL|DT|MADV|PR|LOCAL|TCPOPT)_/ ||
+		$2 == "LOOP_CONFIGURE" ||
+		$2 ~ /^(AF|SOCK|SO|SOL|IPPROTO|IP|IPV6|TCP|MCAST|EVFILT|NOTE|SHUT|PROT|MAP|MREMAP|MFD|T?PACKET|MSG|SCM|MCL|DT|MADV|PR|LOCAL|TCPOPT|UDP)_/ ||
 		$2 ~ /^NFC_(GENL|PROTO|COMM|RF|SE|DIRECTION|LLCP|SOCKPROTO)_/ ||
 		$2 ~ /^NFC_.*_(MAX)?SIZE$/ ||
 		$2 ~ /^RAW_PAYLOAD_/ ||
+		$2 ~ /^[US]F_/ ||
 		$2 ~ /^TP_STATUS_/ ||
 		$2 ~ /^FALLOC_/ ||
 		$2 ~ /^ICMPV?6?_(FILTER|SEC)/ ||
@@ -525,7 +543,7 @@ ccflags="$@"
 		$2 ~ /^(MS|MNT|MOUNT|UMOUNT)_/ ||
 		$2 ~ /^NS_GET_/ ||
 		$2 ~ /^TUN(SET|GET|ATTACH|DETACH)/ ||
-		$2 ~ /^(O|F|[ES]?FD|NAME|S|PTRACE|PT|TFD)_/ ||
+		$2 ~ /^(O|F|[ES]?FD|NAME|S|PTRACE|PT|PIOD|TFD)_/ ||
 		$2 ~ /^KEXEC_/ ||
 		$2 ~ /^LINUX_REBOOT_CMD_/ ||
 		$2 ~ /^LINUX_REBOOT_MAGIC[12]$/ ||
@@ -533,6 +551,8 @@ ccflags="$@"
 		$2 !~ "NLA_TYPE_MASK" &&
 		$2 !~ /^RTC_VL_(ACCURACY|BACKUP|DATA)/ &&
 		$2 ~ /^(NETLINK|NLM|NLMSG|NLA|IFA|IFAN|RT|RTC|RTCF|RTN|RTPROT|RTNH|ARPHRD|ETH_P|NETNSA)_/ ||
+		$2 ~ /^SOCK_|SK_DIAG_|SKNLGRP_$/ ||
+		$2 ~ /^(CONNECT|SAE)_/ ||
 		$2 ~ /^FIORDCHK$/ ||
 		$2 ~ /^SIOC/ ||
 		$2 ~ /^TIOC/ ||
@@ -547,8 +567,9 @@ ccflags="$@"
 		$2 ~ /^RLIMIT_(AS|CORE|CPU|DATA|FSIZE|LOCKS|MEMLOCK|MSGQUEUE|NICE|NOFILE|NPROC|RSS|RTPRIO|RTTIME|SIGPENDING|STACK)|RLIM_INFINITY/ ||
 		$2 ~ /^PRIO_(PROCESS|PGRP|USER)/ ||
 		$2 ~ /^CLONE_[A-Z_]+/ ||
-		$2 !~ /^(BPF_TIMEVAL|BPF_FIB_LOOKUP_[A-Z]+)$/ &&
+		$2 !~ /^(BPF_TIMEVAL|BPF_FIB_LOOKUP_[A-Z]+|BPF_F_LINK)$/ &&
 		$2 ~ /^(BPF|DLT)_/ ||
+		$2 ~ /^AUDIT_/ ||
 		$2 ~ /^(CLOCK|TIMER)_/ ||
 		$2 ~ /^CAN_/ ||
 		$2 ~ /^CAP_/ ||
@@ -567,11 +588,11 @@ ccflags="$@"
 		$2 ~ /^KEY_(SPEC|REQKEY_DEFL)_/ ||
 		$2 ~ /^KEYCTL_/ ||
 		$2 ~ /^PERF_/ ||
-		$2 ~ /^SECCOMP_MODE_/ ||
+		$2 ~ /^SECCOMP_/ ||
 		$2 ~ /^SEEK_/ ||
+		$2 ~ /^SCHED_/ ||
 		$2 ~ /^SPLICE_/ ||
 		$2 ~ /^SYNC_FILE_RANGE_/ ||
-		$2 !~ /^AUDIT_RECORD_MAGIC/ &&
 		$2 !~ /IOC_MAGIC/ &&
 		$2 ~ /^[A-Z][A-Z0-9_]+_MAGIC2?$/ ||
 		$2 ~ /^(VM|VMADDR)_/ ||
@@ -588,6 +609,9 @@ ccflags="$@"
 		$2 ~ /^FSOPT_/ ||
 		$2 ~ /^WDIO[CFS]_/ ||
 		$2 ~ /^NFN/ ||
+		$2 !~ /^NFT_META_IIFTYPE/ &&
+		$2 ~ /^NFT_/ ||
+		$2 ~ /^NF_NAT_/ ||
 		$2 ~ /^XDP_/ ||
 		$2 ~ /^RWF_/ ||
 		$2 ~ /^(HDIO|WIN|SMART)_/ ||
@@ -597,8 +621,10 @@ ccflags="$@"
 		$2 ~ /^DEVLINK_/ ||
 		$2 ~ /^ETHTOOL_/ ||
 		$2 ~ /^LWTUNNEL_IP/ ||
+		$2 ~ /^ITIMER_/ ||
 		$2 !~ "WMESGLEN" &&
 		$2 ~ /^W[A-Z0-9]+$/ ||
+		$2 ~ /^P_/ ||
 		$2 ~/^PPPIOC/ ||
 		$2 ~ /^FAN_|FANOTIFY_/ ||
 		$2 == "HID_MAX_DESCRIPTOR_SIZE" ||
@@ -608,7 +634,8 @@ ccflags="$@"
 		$2 ~ /^OTP/ ||
 		$2 ~ /^MEM/ ||
 		$2 ~ /^WG/ ||
-		$2 ~ /^BLK[A-Z]*(GET$|SET$|BUF$|PART$|SIZE)/ {printf("\t%s = C.%s\n", $2, $2)}
+		$2 ~ /^FIB_RULE_/ ||
+		$2 ~ /^BLK[A-Z]*(GET$|SET$|BUF$|PART$|SIZE|IOMIN$|IOOPT$|ALIGNOFF$|DISCARD|ROTATIONAL$|ZEROOUT$|GETDISKSEQ$)/ {printf("\t%s = C.%s\n", $2, $2)}
 		$2 ~ /^__WCOREFLAG$/ {next}
 		$2 ~ /^__W[A-Z0-9]+$/ {printf("\t%s = C.%s\n", substr($2,3), $2)}
 
@@ -629,7 +656,7 @@ errors=$(
 signals=$(
 	echo '#include <signal.h>' | $CC -x c - -E -dM $ccflags |
 	awk '$1=="#define" && $2 ~ /^SIG[A-Z0-9]+$/ { print $2 }' |
-	egrep -v '(SIGSTKSIZE|SIGSTKSZ|SIGRT|SIGMAX64)' |
+	grep -v 'SIGSTKSIZE\|SIGSTKSZ\|SIGRT\|SIGMAX64' |
 	sort
 )
 
@@ -639,14 +666,13 @@ echo '#include <errno.h>' | $CC -x c - -E -dM $ccflags |
 	sort >_error.grep
 echo '#include <signal.h>' | $CC -x c - -E -dM $ccflags |
 	awk '$1=="#define" && $2 ~ /^SIG[A-Z0-9]+$/ { print "^\t" $2 "[ \t]*=" }' |
-	egrep -v '(SIGSTKSIZE|SIGSTKSZ|SIGRT|SIGMAX64)' |
+	grep -v 'SIGSTKSIZE\|SIGSTKSZ\|SIGRT\|SIGMAX64' |
 	sort >_signal.grep
 
 echo '// mkerrors.sh' "$@"
 echo '// Code generated by the command above; see README.md. DO NOT EDIT.'
 echo
 echo "//go:build ${GOARCH} && ${GOOS}"
-echo "// +build ${GOARCH},${GOOS}"
 echo
 go tool cgo -godefs -- "$@" _const.go >_error.out
 cat _error.out | grep -vf _error.grep | grep -vf _signal.grep
@@ -725,7 +751,8 @@ main(void)
 		e = errors[i].num;
 		if(i > 0 && errors[i-1].num == e)
 			continue;
-		strcpy(buf, strerror(e));
+		strncpy(buf, strerror(e), sizeof(buf) - 1);
+		buf[sizeof(buf) - 1] = '\0';
 		// lowercase first letter: Bad -> bad, but STREAM -> STREAM.
 		if(A <= buf[0] && buf[0] <= Z && a <= buf[1] && buf[1] <= z)
 			buf[0] += a - A;
@@ -744,7 +771,8 @@ main(void)
 		e = signals[i].num;
 		if(i > 0 && signals[i-1].num == e)
 			continue;
-		strcpy(buf, strsignal(e));
+		strncpy(buf, strsignal(e), sizeof(buf) - 1);
+		buf[sizeof(buf) - 1] = '\0';
 		// lowercase first letter: Bad -> bad, but STREAM -> STREAM.
 		if(A <= buf[0] && buf[0] <= Z && a <= buf[1] && buf[1] <= z)
 			buf[0] += a - A;

vendor/golang.org/x/sys/unix/mmap_nomremap.go

@@ -0,0 +1,13 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build aix || darwin || dragonfly || freebsd || openbsd || solaris || zos
+
+package unix
+
+var mapper = &mmapper{
+	active: make(map[*byte][]byte),
+	mmap:   mmap,
+	munmap: munmap,
+}

vendor/golang.org/x/sys/unix/mremap.go

@@ -0,0 +1,57 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build linux || netbsd
+
+package unix
+
+import "unsafe"
+
+type mremapMmapper struct {
+	mmapper
+	mremap func(oldaddr uintptr, oldlength uintptr, newlength uintptr, flags int, newaddr uintptr) (xaddr uintptr, err error)
+}
+
+var mapper = &mremapMmapper{
+	mmapper: mmapper{
+		active: make(map[*byte][]byte),
+		mmap:   mmap,
+		munmap: munmap,
+	},
+	mremap: mremap,
+}
+
+func (m *mremapMmapper) Mremap(oldData []byte, newLength int, flags int) (data []byte, err error) {
+	if newLength <= 0 || len(oldData) == 0 || len(oldData) != cap(oldData) || flags&mremapFixed != 0 {
+		return nil, EINVAL
+	}
+
+	pOld := &oldData[cap(oldData)-1]
+	m.Lock()
+	defer m.Unlock()
+	bOld := m.active[pOld]
+	if bOld == nil || &bOld[0] != &oldData[0] {
+		return nil, EINVAL
+	}
+	newAddr, errno := m.mremap(uintptr(unsafe.Pointer(&bOld[0])), uintptr(len(bOld)), uintptr(newLength), flags, 0)
+	if errno != nil {
+		return nil, errno
+	}
+	bNew := unsafe.Slice((*byte)(unsafe.Pointer(newAddr)), newLength)
+	pNew := &bNew[cap(bNew)-1]
+	if flags&mremapDontunmap == 0 {
+		delete(m.active, pOld)
+	}
+	m.active[pNew] = bNew
+	return bNew, nil
+}
+
+func Mremap(oldData []byte, newLength int, flags int) (data []byte, err error) {
+	return mapper.Mremap(oldData, newLength, flags)
+}
+
+func MremapPtr(oldAddr unsafe.Pointer, oldSize uintptr, newAddr unsafe.Pointer, newSize uintptr, flags int) (ret unsafe.Pointer, err error) {
+	xaddr, err := mapper.mremap(uintptr(oldAddr), oldSize, newSize, flags, uintptr(newAddr))
+	return unsafe.Pointer(xaddr), err
+}