kvirc: add 5.2.8

ccid/README

@@ -0,0 +1,11 @@
+libccid provides a PC/SC IFD handler implementation for the USB
+smart card drivers compliant to the Chip Card Interface Device (CCID)
+protocol.
+
+This package is needed to communicate with the CCID smartcard readers
+through the PC/SC Lite resource manager (pcscd). It also supports
+various Gemplus serial smart card readers.
+
+You will need to edit the pcsc-lite config files to be able to use
+serial smart card readers. The INSTALL file in the documentation
+directory has all the details.

ccid/ccid.SlackBuild

@@ -0,0 +1,123 @@
+#!/bin/bash
+
+# Slackware build script for ccid
+
+# Copyright 2008 Andrew Psaltis <ampsaltis@gmail.com>
+# Copyright 2014-2015 LukenShiro, Italy
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified by Robby Workman <rworkman@slackbuilds.org>
+# 11 August 2008 -- Updated to version 1.3.8 (by Andrew Psaltis)
+
+# Modified by Daniel R. <danielrodriguez.es@gmail.com>
+# 05 October 2009 -- Updated to version 1.3.11
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=ccid
+VERSION=${VERSION:-1.4.36}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+DOCFILES="AUTHORS COPYING INSTALL README.md"
+
+set -e
+
+rm -rf $PKG $TMP/$PRGNAM-$VERSION
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+tar xf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+ -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# --enable-udev flag is no longer supported
+CFLAGS="$SLKCFLAGS -rdynamic" \
+CXXFLAGS="$SLKCFLAGS -rdynamic" \
+LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2 -Wl,-s" \
+ ./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-twinserial \
+  --enable-static=no \
+  --enable-composite-as-multislot \
+  --build=$ARCH-slackware-linux
+
+make -j$(nproc)
+make install DESTDIR=$PKG
+
+# Install the udev rules since this is not done automatically.
+install -Dpm 0644 src/92_pcscd_ccid.rules $PKG/lib/udev/rules.d/92_pcscd_ccid.rules
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+install -Dpm 0644 $CWD/$PRGNAM.SlackBuild $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
+
+install -Dpm 0644 $CWD/slack-desc $PKG/install/slack-desc
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

ccid/ccid.info

@@ -0,0 +1,10 @@
+PRGNAM="ccid"
+VERSION="1.4.36"
+HOMEPAGE="https://ccid.apdu.fr/"
+DOWNLOAD="https://ccid.apdu.fr/files/ccid-1.4.36.tar.bz2"
+MD5SUM="3108dad76c08648bc253d9286630b0d1"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="pcsc-lite"
+MAINTAINER="LukenShiro"
+EMAIL="lukenshiro@ngi.it"

ccid/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+ccid: ccid (PC/SC driver for USB CCID smart card readers)
+ccid:
+ccid: libccid provides a PC/SC IFD handler implementation for the USB smart
+ccid: card drivers compliant to the Card Chip Interface Device (CCID)
+ccid: protocol.
+ccid: This package is needed to communicate with the CCID smartcard readers
+ccid: through the PC/SC Lite resource manager (pcscd). It also supports
+ccid: the GemPC Twin via serial port, and the GemPC PCMCIA and PCI-Express
+ccid: cards.
+ccid:
+ccid: More info at: https://github.com/LudovicRousseau/CCID

gengetopt/README

@@ -0,0 +1,2 @@
+Gengetopt is a tool to write command line option parsing code for C
+programs.

gengetopt/gengetopt.SlackBuild

@@ -0,0 +1,114 @@
+#!/bin/bash
+
+# Slackware build script for gengetopt
+
+# Copyright 2015-2016 Willy Sudiarto Raharjo <willysr@slackbuilds.org>
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=gengetopt
+VERSION=${VERSION:-2.23}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xf $CWD/$PRGNAM-$VERSION.tar.xz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+export CFLAGS="$SLKCFLAGS -rdynamic"
+export CXXFLAGS="$CFLAGS"
+export LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-s "
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --build=$ARCH-slackware-linux
+
+make -j$(nproc)
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mv $PKG/usr/share/info $PKG/usr
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*.info*
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING INSTALL LICENSE NEWS README THANKS $PKG/usr/doc/$PRGNAM-$VERSION
+install -Dpm 0644 $CWD/$PRGNAM.SlackBuild $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+install -Dpm 0644 $CWD/slack-desc $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

gengetopt/gengetopt.info

@@ -0,0 +1,10 @@
+PRGNAM="gengetopt"
+VERSION="2.23"
+HOMEPAGE="https://www.gnu.org/software/gengetopt"
+DOWNLOAD="ftp://ftp.gnu.org/gnu/gengetopt/gengetopt-2.23.tar.xz"
+MD5SUM="ea165d618640dbdecb42ae4491337965"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Willy Sudiarto Raharjo"
+EMAIL="willysr@slackbuilds.org"

gengetopt/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+gengetopt: gengetopt (Command Line Parser)
+gengetopt:
+gengetopt: Gengetopt is a tool to write command line option parsing code for
+gengetopt: C programs.
+gengetopt:
+gengetopt:
+gengetopt:
+gengetopt:
+gengetopt: Project URL: https://www.gnu.org/software/gengetopt
+gengetopt:
+gengetopt:

google-go-lang/google-go-lang.SlackBuild

@@ -29,13 +29,14 @@
 # SOFTWARE.
 
 PRGNAM=google-go-lang
-VERSION=${VERSION:-1.24.2}
+VERSION=${VERSION:-1.25.1}
 BOOTSTRAP0_VERSION=1.4-bootstrap-20171003
 BOOTSTRAP1_VERSION=1.18.10
 BOOTSTRAP2_VERSION=1.21.13
 BOOTSTRAP3_VERSION=1.22.10
 BOOTSTRAP4_VERSION=1.23.8
-BOOTSTRAP5_VERSION=$VERSION
+BOOTSTRAP5_VERSION=1.24.7
+BOOTSTRAP6_VERSION=$VERSION
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 
@@ -67,7 +68,7 @@ else
 fi
 
 CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
+TMP=${TMP:-/tmp/EXs}
 PKG=$TMP/package-$PRGNAM
 OUTPUT=${OUTPUT:-/tmp}
 BOOTSTRAP0_DIR="${TMP}/bootstrap-go${BOOTSTRAP0_VERSION}"
@@ -76,6 +77,7 @@ BOOTSTRAP2_DIR="${TMP}/bootstrap-go${BOOTSTRAP2_VERSION}"
 BOOTSTRAP3_DIR="${TMP}/bootstrap-go${BOOTSTRAP3_VERSION}"
 BOOTSTRAP4_DIR="${TMP}/bootstrap-go${BOOTSTRAP4_VERSION}"
 BOOTSTRAP5_DIR="${TMP}/bootstrap-go${BOOTSTRAP5_VERSION}"
+BOOTSTRAP6_DIR="${TMP}/bootstrap-go${BOOTSTRAP6_VERSION}"
 
 set -e
 
@@ -94,7 +96,7 @@ find -L . \
 
 ORIG_PATH="${PATH}"
 
-export MAKEFLAGS="-j 16"
+export MAKEFLAGS="-j $(nproc)"
 
 echo ""
 echo "Building 0-th bootstrap compiler, ${BOOTSTRAP0_VERSION}"
@@ -213,14 +215,34 @@ pushd "$BOOTSTRAP5_DIR"
 	popd
 popd
 
+# Time to build 6-th bootstrap compiler
+echo ""
+echo "Building 6-th bootstrap compiler, ${BOOTSTRAP6_VERSION}"
+mkdir -p "${BOOTSTRAP6_DIR}"
+pushd "$BOOTSTRAP6_DIR"
+	tar xf "${CWD}/go${BOOTSTRAP6_VERSION}.src.tar.gz"
+	pushd go
+		chown -R root:root .
+		export PATH="${BOOTSTRAP5_DIR}/go/bin:${ORIG_PATH}"
+		unset GOBIN GOPATH GOOS GOARCH CGO_ENABLED
+		export GOROOT_BOOTSTRAP="$BOOTSTRAP5_DIR/go"
+		export GOROOT="$(pwd)"
+		export GOROOT_FINAL="${BOOTSTRAP6_DIR}/go"
+		pushd src
+			LC_ALL=C ./make.bash
+			$GOROOT/bin/go install -buildmode=exe std
+		popd
+	popd
+popd
+
 
 # Time to build target compiler
 echo ""
-echo "Building target compiler, ${BOOTSTRAP5_VERSION}"
+echo "Building target compiler, ${BOOTSTRAP6_VERSION}"
-export PATH="${BOOTSTRAP5_DIR}/go/bin:${PATH}"
+export PATH="${BOOTSTRAP6_DIR}/go/bin:${PATH}"
 cd "$PKG/usr/lib${LIBDIRSUFFIX}/go${VERSION}/go"
 unset GOBIN GOPATH GOOS GOARCH CGO_ENABLED
-export GOROOT_BOOTSTRAP="$BOOTSTRAP5_DIR/go"
+export GOROOT_BOOTSTRAP="$BOOTSTRAP6_DIR/go"
 export GOROOT="$(pwd)"
 export GOROOT_FINAL="/usr/lib${LIBDIRSUFFIX}/go${VERSION}/go"
 export GO_LDFLAGS="-s -w"

google-go-lang/google-go-lang.info

@@ -1,8 +1,8 @@
 PRGNAM="google-go-lang"
-VERSION="1.24.2"
+VERSION="1.25.1"
 HOMEPAGE="https://go.dev/"
-DOWNLOAD="https://dl.google.com/go/go1.4-bootstrap-20171003.tar.gz https://go.dev/dl/go1.18.10.src.tar.gz https://go.dev/dl/go1.21.13.src.tar.gz https://go.dev/dl/go1.22.10.src.tar.gz https://go.dev/dl/go1.23.8.src.tar.gz https://go.dev/dl/go1.24.2.src.tar.gz"
+DOWNLOAD="https://dl.google.com/go/go1.4-bootstrap-20171003.tar.gz https://go.dev/dl/go1.18.10.src.tar.gz https://go.dev/dl/go1.21.13.src.tar.gz https://go.dev/dl/go1.22.10.src.tar.gz https://go.dev/dl/go1.23.8.src.tar.gz https://go.dev/dl/go1.24.7.src.tar.gz https://go.dev/dl/go1.25.1.src.tar.gz"
-MD5SUM="dbf727a4b0e365bf88d97cbfde590016 002b4daec72ab396dc023a5ec445a68a 3454362fc56df5020920e43fee2776ab 49b9eb43b62c1bdd9b5af72f61860e2d e72f3d3ecc20466d7721b1892142d900 c34263bd873e92fa99649fb501223e1f"
+MD5SUM="dbf727a4b0e365bf88d97cbfde590016 002b4daec72ab396dc023a5ec445a68a 3454362fc56df5020920e43fee2776ab 49b9eb43b62c1bdd9b5af72f61860e2d e72f3d3ecc20466d7721b1892142d900 52eea261435dcd9fe447ce092f156519 86ac635cc05683ae97c77bbeae5bd884"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""

haproxy/README

@@ -0,0 +1,11 @@
+HAProxy is a free, very fast and reliable solution offering high
+availability, load balancing, and proxying for TCP and HTTP-based
+applications. It is particularly suited for very high traffic web sites.
+
+Note that a default configuration file is no longer provided at
+/etc/haproxy/haproxy.cfg. See /usr/doc/haproxy-*/examples 
+for some sample configuration files. The directory also contains 
+example files for logging.
+
+The script supports optional variables for Lua, PCRE and QUIC.
+See README.SLACKWARE for more information.

haproxy/README.SLACKWARE

@@ -0,0 +1,94 @@
+--------
+Compiling, optional dependencies and variables
+--------
+
+This SlackBuild script supports additional variables.
+
+1) Lua support
+
+Lua is an optional dependency. Pass LUA=yes to this script
+to enable Lua support.
+
+2) Custom Perl Compatible Regular Expressions
+
+Perl Compatible Regular Expressions version 2 without JIT
+support is enabled by default. You can change this by passing
+PCRE= to this script.
+
+Currently supported settings are listed in the Makefile.
+
+For example:
+ * Use PCRE=PCRE2_JIT to use libpcre2 with JIT support.
+ * Use PCRE=PCRE to use libpcre version 1.
+
+You can also use the variables as they're written in the
+Makefile, such as PCRE=USE_PCRE_JIT or PCRE=USE_PCRE=1.
+The script will parse them correctly.
+
+3) QUIC support (experimental)
+
+Starting with version 2.6.0, HAProxy supports HTTP/3 over QUIC.
+The QUIC support is currently experimental and requires QUICTLS.
+OpenSSL package shipped with Slackware 15.0 is not compatible
+with QUIC.
+
+Pass QUIC=yes to this script to enable HTTP/3 support.
+
+Check out these links for more information:
+* https://github.com/quictls/
+* https://www.haproxy.com/blog/announcing-haproxy-2-6/
+
+--------
+Logging
+--------
+
+If you want to enable logging, please first refer to HAProxy manual
+on how to enable logging and how to select which events to log.
+
+HAProxy log forwarding works fine with Slackware's sysklogd.
+
+There are example files located in /usr/doc/haproxy-*/examples
+The files are called syslog.example and logrotate.example.
+
+You might want to add something like this to your haproxy.cfg file:
+
+global
+   log /dev/log local0
+
+Note that rotating logs does not require restarting HAProxy.
+Instead, logrotate script should send a HUP signal to syslogger
+when rotating. Example script is included in syslog.example.
+Rotating has been tested with sysklogd (Slackware default) and
+syslog-ng.
+
+--------
+Automatic starting/stopping upon system start/shutdown
+--------
+
+To start HAProxy automatically when system is booted,
+add the following lines to /etc/rc.d/rc.local:
+
+   if [ -x /etc/rc.d/rc.haproxy ]; then
+       /etc/rc.d/rc.haproxy start
+   fi
+
+To stop HAProxy on system shutdown, add following lines
+to /etc/rc.d/rc.local_shutdown
+
+   if [ -x /etc/rc.d/rc.haproxy ]; then
+       /etc/rc.d/rc.haproxy stop
+   fi
+
+--------
+Privileges
+--------
+
+Like with the most rc scripts /etc/rc.d/rc.haproxy should be
+run as root. You can easily drop process privileges by specifying
+another user (and group) in the main configuration file.
+
+Add something like this to haproxy.cfg:
+
+global
+  user nobody
+  group nogroup

haproxy/doinst.sh

@@ -0,0 +1,25 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.haproxy.new

haproxy/haproxy.SlackBuild

@@ -0,0 +1,169 @@
+#!/bin/bash
+
+# Slackware build script for haproxy
+
+# Copyright 2018 T3slider <t3slider@gmail.com>
+# All rights reserved.
+#
+# Copyright 2025 Badchay <badchay@protonmail.com>
+# All rights reserved.
+#
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=haproxy
+VERSION=${VERSION:-3.2.4}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# This should work with Slackware-provided kernels, but you may wish to
+# use 'generic' instead
+TARGET=${TARGET:-linux-glibc}
+
+# Include lua support? (Requires lua)
+LUA=${LUA:-no}
+# Perl Compatible Regular Expressions version 2 is enabled by default.
+# You might want to use libpcre1 and/or JIT-enabled version instead.
+PCRE=${PCRE:-PCRE2}
+# Include QUIC (HTTP/3) support?
+# This requires QUICTLS or wolfSSL.
+QUIC=${QUIC:-no}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+LUAOPT=""
+if [ "$LUA" == "yes" ]; then
+    LUAOPT="USE_LUA=1"
+else
+    LUAOPT="USE_LUA="
+fi
+
+PCREOPT=""
+if [ "$PCRE" != "PCRE2" ]; then
+   PCREOPT=$(echo $PCRE | sed -e 's/USE_//' -e 's/=1//')
+else
+   PCREOPT="PCRE2"
+fi
+
+QUICOPT=""
+if [ "$QUIC" == "yes" ]; then
+    LUAOPT="USE_QUIC=1"
+else
+    LUAOPT="USE_QUIC="
+fi
+
+make -j$(nproc) \
+    TARGET=$TARGET \
+    USE_$PCREOPT=1 \
+    $QUICOPT \
+    USE_OPENSSL=1 \
+    USE_ENGINE=1 \
+    USE_ZLIB=1 \
+    USE_NS=1 \
+    USE_PROMEX=1 \
+    $LUAOPT \
+    EXTRA=""
+make install \
+    PREFIX=/usr \
+    MANDIR=/usr/man \
+    DOCDIR=/usr/doc/$PRGNAM-$VERSION \
+    EXTRA="" \
+    DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+install -D -m 0644 $CWD/rc.$PRGNAM $PKG/etc/rc.d/rc.$PRGNAM.new
+
+cp -a CONTRIBUTING LICENSE MAINTAINERS README.md BRANCHES SUBVERS VERDATE VERSION examples \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+# If there's a CHANGELOG, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r CHANGELOG ]; then
+  head -n 1000 CHANGELOG > $PKG/usr/doc/$PRGNAM-$VERSION/CHANGELOG
+  touch -r CHANGELOG $PKG/usr/doc/$PRGNAM-$VERSION/CHANGELOG
+fi
+
+cp $CWD/{syslog.example,logrotate.example} $PKG/usr/doc/$PRGNAM-$VERSION/examples/
+
+mkdir -p $PKG/etc/haproxy
+mv $PKG/usr/doc/$PRGNAM-$VERSION/examples/errorfiles $PKG/etc/haproxy/errors
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

haproxy/haproxy.info

@@ -0,0 +1,10 @@
+PRGNAM="haproxy"
+VERSION="3.2.4"
+HOMEPAGE="https://www.haproxy.org/"
+DOWNLOAD="https://www.haproxy.org/download/3.2/src/haproxy-3.2.4.tar.gz"
+MD5SUM="35a9600a063df8d85fd845dc330cb111"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Badchay"
+EMAIL="badchay@protonmail.com"

haproxy/logrotate.example

@@ -0,0 +1,9 @@
+/var/log/haproxy {
+    notifempty
+    weekly
+    missingok
+    rotate 4
+    postrotate
+         /bin/kill -HUP $(cat /run/syslogd.pid 2>/dev/null) 2>/dev/null || true
+    endscript
+}

haproxy/rc.haproxy

@@ -0,0 +1,99 @@
+#!/bin/bash
+#
+# Slackware initialization script for HAProxy.
+#
+# This script was made by T3slider.
+# Slight modifications by Badchay.
+#
+
+
+HAPROXY=/usr/sbin/haproxy
+CONFIG=/etc/haproxy/haproxy.cfg
+PIDFILE=/run/haproxy.pid
+
+if [[ ! -f $CONFIG && "$1" == "start" ]]; then
+   echo "No configuration file found. Cannot continue."
+   echo "The script looks for the configuration file placed in $CONFIG"
+   exit 1
+fi
+
+start() {
+    if [ -r $PIDFILE ]; then
+        echo 'HAProxy is already running!'
+        return
+    else
+    	echo "Starting HAProxy..."
+        $HAPROXY -f $CONFIG -D -p $PIDFILE
+    fi
+}
+
+stop() {
+    if [ ! -r $PIDFILE ]; then
+        echo 'HAProxy is not running!'
+        return
+    fi
+    echo "Soft-stopping HAProxy..."
+    kill -USR1 $(cat $PIDFILE)
+    # Even with the right permissions the PID file will not be removed...
+    rm -f $PIDFILE
+}
+
+force_stop() {
+    if [ ! -r $PIDFILE ]; then
+        echo 'HAProxy is not running!'
+        return
+    fi
+    echo "Hard-stopping HAProxy..."
+    kill $(cat $PIDFILE)
+    # Even with the right permissions the PID file will not be removed...
+    rm -f $PIDFILE
+}
+
+status() {
+    if [ ! -r $PIDFILE ]; then
+        echo "HAProxy is not running."
+        return
+    fi
+    PID=$(cat $PIDFILE)
+    if [ -z "$PID" ]; then
+        echo 'PID file is empty! HAProxy does not appear to be running, but there is a stale PID file.'
+    elif kill -0 $PID; then
+        echo "HAProxy is running."
+    else
+        echo "HAProxy is not running, but there is a stale PID file."
+    fi
+}
+
+checkconfig() {
+    $HAPROXY -c -q -V -f $CONFIG
+}
+
+case "$1" in
+    'start')
+        start
+        ;;
+    'stop')
+        stop
+        ;;
+    'force_stop')
+        force_stop
+        ;;
+    'restart')
+        stop
+        start
+        ;;
+    'force_restart')
+        force_stop
+        start
+        ;;
+    'status')
+        status
+        ;;
+    'checkconfig')
+        checkconfig
+        ;;
+    *)
+        echo "Usage: $0 {start|stop|force_stop|restart|force_restart|status|checkconfig}"
+        exit 1
+        ;;
+esac

haproxy/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler------------------------------------------------------|
+haproxy: haproxy (The Reliable, High Performance TCP/HTTP Load Balancer)
+haproxy:
+haproxy: HAProxy is a free, very fast and reliable reverse-proxy offering high
+haproxy: availability, load balancing, and proxying for TCP and HTTP-based
+haproxy: applications. It is particularly suited for very high traffic
+haproxy: web sites and powers a significant portion of the world's most
+haproxy: visited ones.
+haproxy:
+haproxy:
+haproxy: Check out more information on https://www.haproxy.org/
+haproxy:

haproxy/syslog.example

@@ -0,0 +1,20 @@
+# Note: If you enable local0 logging. You'll probably want to add
+# something like local0.none to your /etc/syslogd.conf
+#
+# Otherwise the logs will be sent to your /var/log/messages file
+# as well as the logfile specified below.
+#
+# An example would be to change the default line
+#
+# authpriv.none;cron.none;mail.none;news.none    -/var/log/messages
+# to
+# authpriv.none;cron.none;mail.none;news.none;local0.none -/var/log/messages
+# 
+# Move this file to /etc/syslog.d/ with .conf extension
+# so syslog will load it automatically.
+#
+# Also remember to restart sysklogd
+# sh /etc/rc.d/rc.syslog restart
+#
+
+local0.*                -/var/log/haproxy

htop/htop.SlackBuild

@@ -0,0 +1,134 @@
+#!/bin/bash
+
+# Copyright 2011, 2016, 2018, 2020, 2025  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=htop
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i686 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=pentium4 -mtune=generic"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -march=x86-64 -mtune=generic -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Install documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS* COPYING* NEWS* README* TODO* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+

htop/htop.url

@@ -0,0 +1 @@
+https://github.com/htop-dev/htop

htop/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+htop: htop (ncurses-based interactive process viewer)
+htop:
+htop: htop is a free (GPL) ncurses-based process viewer that is similar to
+htop: the well-known "top" program, but allows to scroll the list vertically
+htop: and horizontally to see all processes and their full command lines.
+htop: Tasks related to processes (killing, renicing) can be done without
+htop: entering their PIDs.
+htop:
+htop: htop is developed by Hisham Muhammad.
+htop: Homepage: http://hisham.hm/htop/
+htop:

keepassxc/keepassxc.SlackBuild

@@ -25,7 +25,7 @@
 
 PRGNAM=keepassxc
 VERSION=${VERSION:-2.7.10}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 TAG=${TAG:-_EXs}
 
 if [ -z "$ARCH" ]; then
@@ -74,7 +74,7 @@ mkdir -p build
 cd build
   export CFLAGS="$SLKCFLAGS"
   export CXXFLAGS="$CFLAGS -fvectorize -fno-rtti"
-  export LDFLAGS="-ltermcap -flto -rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-s "
+  export LDFLAGS="-ltermcap -rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-s -Wl,-O2 "
   cmake -GNinja \
     -DCMAKE_C_FLAGS:STRING="$CFLAGS" \
     -DCMAKE_CXX_FLAGS:STRING="$CFLAGS" \

kernel/build-all-kernels.sh

@@ -195,6 +195,15 @@ for recipe in $RECIPES ; do
       sh install/doinst.sh 2> /dev/null
     )
 
+    # The initial release of any new kernel branch (e.g. 6.14.0) has a quirk -
+    # The tarball will be labeled linux-6.14.tar.xz, but the kernel's version
+    # in the Makefile will be 6.14.0. If we are regenerating kernel config
+    # files, then we need to make sure that we're still using the proper
+    # version number at this point:
+    if [ ! -r "$KERNEL_CONFIGDIR/config-${VERSION}${LOCALVERSION}${CONFIG_SUFFIX}" -a -r "$KERNEL_CONFIGDIR/config-${VERSION}.0${LOCALVERSION}${CONFIG_SUFFIX}" ]; then
+      VERSION=${VERSION}.0
+    fi
+
     KERNEL_GENERIC_PACKAGE_NAME=$(PRINT_PACKAGE_NAME=YES KERNEL_SOURCE=$TMP/package-kernel-source/usr/src/linux KERNEL_CONFIG=$KERNEL_CONFIGDIR/config-${VERSION}${LOCALVERSION}${CONFIG_SUFFIX} CONFIG_SUFFIX=${CONFIG_SUFFIX} KERNEL_OUTPUT_DIRECTORY=$OUTPUT/kernels/${KERNEL_NAME}.s BUILD=$BUILD ./kernel-generic.SlackBuild)
 
     KERNEL_SOURCE=$TMP/package-kernel-source/usr/src/linux KERNEL_CONFIG=$KERNEL_CONFIGDIR/config-${VERSION}${LOCALVERSION}${CONFIG_SUFFIX} CONFIG_SUFFIX=${CONFIG_SUFFIX} KERNEL_OUTPUT_DIRECTORY=$OUTPUT/kernels/${KERNEL_NAME}.s BUILD=$BUILD ./kernel-generic.SlackBuild

kernel/kernel-configs/config-6.12.33.ia32

@@ -1,19 +1,19 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 6.12.7 Kernel Configuration
+# Linux/x86 6.12.33 Kernel Configuration
 #
-CONFIG_CC_VERSION_TEXT="gcc (GCC) 14.2.0"
+CONFIG_CC_VERSION_TEXT="gcc (GCC) 15.1.0"
 CONFIG_CC_IS_GCC=y
-CONFIG_GCC_VERSION=140200
+CONFIG_GCC_VERSION=150100
 CONFIG_CLANG_VERSION=0
 CONFIG_AS_IS_GNU=y
-CONFIG_AS_VERSION=24301
+CONFIG_AS_VERSION=24400
 CONFIG_LD_IS_BFD=y
-CONFIG_LD_VERSION=24301
+CONFIG_LD_VERSION=24400
 CONFIG_LLD_VERSION=0
-CONFIG_RUSTC_VERSION=108300
+CONFIG_RUSTC_VERSION=108700
 CONFIG_RUST_IS_AVAILABLE=y
-CONFIG_RUSTC_LLVM_VERSION=190101
+CONFIG_RUSTC_LLVM_VERSION=200101
 CONFIG_CC_CAN_LINK=y
 CONFIG_CC_CAN_LINK_STATIC=y
 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
@@ -21,7 +21,9 @@ CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
 CONFIG_TOOLS_SUPPORT_RELR=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
-CONFIG_PAHOLE_VERSION=128
+CONFIG_CC_HAS_COUNTED_BY=y
+CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
+CONFIG_PAHOLE_VERSION=130
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 CONFIG_THREAD_INFO_IN_TASK=y
@@ -750,7 +752,7 @@ CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
 CONFIG_KVM_VFIO=y
 CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
 CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
+CONFIG_HAVE_KVM_IRQ_BYPASS=m
 CONFIG_HAVE_KVM_NO_POLL=y
 CONFIG_KVM_XFER_TO_GUEST_WORK=y
 CONFIG_HAVE_KVM_PM_NOTIFIER=y
@@ -2104,7 +2106,7 @@ CONFIG_PCIE_EDR=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
 CONFIG_PCI_STUB=m
 CONFIG_PCI_PF_STUB=m
 CONFIG_PCI_ATS=y
@@ -2320,7 +2322,6 @@ CONFIG_EFI_COCO_SECRET=y
 
 CONFIG_UEFI_CPER=y
 CONFIG_UEFI_CPER_X86=y
-CONFIG_IMX_SCMI_MISC_DRV=m
 
 #
 # Qualcomm firmware drivers
@@ -2958,6 +2959,7 @@ CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_AUTODETECT=y
 CONFIG_MD_BITMAP_FILE=y
+CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
@@ -4156,7 +4158,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ADC is not set
 CONFIG_KEYBOARD_ADP5588=m
 CONFIG_KEYBOARD_ADP5589=m
-# CONFIG_KEYBOARD_APPLESPI is not set
+CONFIG_KEYBOARD_APPLESPI=m
 CONFIG_KEYBOARD_ATKBD=y
 CONFIG_KEYBOARD_QT1050=m
 CONFIG_KEYBOARD_QT1070=m
@@ -6689,6 +6691,8 @@ CONFIG_DRM_PANIC_BACKGROUND_COLOR=0x000000
 CONFIG_DRM_PANIC_SCREEN="user"
 # CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
 # CONFIG_DRM_DEBUG_MODESET_LOCK is not set
+CONFIG_DRM_CLIENT_SELECTION=y
+CONFIG_DRM_CLIENT_SETUP=y
 CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_FBDEV_OVERALLOC=100
 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
@@ -7975,6 +7979,7 @@ CONFIG_HID_THRUSTMASTER=m
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_HID_UDRAW_PS3=m
 CONFIG_HID_U2FZERO=m
+CONFIG_HID_UNIVERSAL_PIDFF=m
 CONFIG_HID_WACOM=m
 CONFIG_HID_WIIMOTE=m
 CONFIG_HID_WINWING=m
@@ -8756,7 +8761,7 @@ CONFIG_VIRTIO_VFIO_PCI=m
 CONFIG_QAT_VFIO_PCI=m
 # end of VFIO support for PCI devices
 
-CONFIG_IRQ_BYPASS_MANAGER=y
+CONFIG_IRQ_BYPASS_MANAGER=m
 CONFIG_VIRT_DRIVERS=y
 CONFIG_VMGENID=y
 CONFIG_VBOXGUEST=m
@@ -8904,7 +8909,6 @@ CONFIG_WILCO_EC=m
 # CONFIG_WILCO_EC_DEBUGFS is not set
 # CONFIG_WILCO_EC_EVENTS is not set
 # CONFIG_WILCO_EC_TELEMETRY is not set
-# CONFIG_CZNIC_PLATFORMS is not set
 CONFIG_MELLANOX_PLATFORM=y
 CONFIG_MLXREG_HOTPLUG=m
 CONFIG_MLXREG_IO=m
@@ -9918,7 +9922,6 @@ CONFIG_PWM_LPSS_PLATFORM=m
 #
 # IRQ chip support
 #
-CONFIG_LAN966X_OIC=m
 # end of IRQ chip support
 
 # CONFIG_IPACK_BUS is not set
@@ -10448,7 +10451,7 @@ CONFIG_SECURITYFS=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_INFINIBAND=y
 CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_PATH=y
 # CONFIG_INTEL_TXT is not set
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_FORTIFY_SOURCE=y
@@ -10461,12 +10464,12 @@ CONFIG_FORTIFY_SOURCE=y
 # CONFIG_SECURITY_YAMA is not set
 # CONFIG_SECURITY_SAFESETID is not set
 # CONFIG_SECURITY_LOCKDOWN_LSM is not set
-# CONFIG_SECURITY_LANDLOCK is not set
+CONFIG_SECURITY_LANDLOCK=y
 # CONFIG_SECURITY_IPE is not set
 # CONFIG_INTEGRITY is not set
 # CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
 CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,landlock"
 
 #
 # Kernel hardening options
@@ -10782,12 +10785,15 @@ CONFIG_CRYPTO_LIB_ARC4=y
 CONFIG_CRYPTO_LIB_GF128MUL=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
+CONFIG_CRYPTO_LIB_CHACHA_INTERNAL=y
 CONFIG_CRYPTO_LIB_CHACHA=m
 CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
+CONFIG_CRYPTO_LIB_CURVE25519_INTERNAL=m
 CONFIG_CRYPTO_LIB_CURVE25519=m
 CONFIG_CRYPTO_LIB_DES=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
 CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
+CONFIG_CRYPTO_LIB_POLY1305_INTERNAL=y
 CONFIG_CRYPTO_LIB_POLY1305=m
 CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LIB_SHA1=y

kernel/kernel-configs/config-6.12.33.x64

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 6.12.7 Kernel Configuration
+# Linux/x86 6.12.33 Kernel Configuration
 #
 CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.2.0"
 CONFIG_CC_IS_GCC=y
@@ -18,6 +18,7 @@ CONFIG_CC_CAN_LINK_STATIC=y
 CONFIG_GCC_ASM_GOTO_OUTPUT_BROKEN=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
+CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
 CONFIG_PAHOLE_VERSION=0
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
@@ -533,6 +534,7 @@ CONFIG_LIVEPATCH=y
 # end of Processor type and features
 
 CONFIG_CC_HAS_NAMED_AS=y
+CONFIG_CC_HAS_NAMED_AS_FIXED_SANITIZERS=y
 CONFIG_USE_X86_SEG_SUPPORT=y
 CONFIG_CC_HAS_RETURN_THUNK=y
 CONFIG_CC_HAS_ENTRY_PADDING=y
@@ -564,6 +566,7 @@ CONFIG_MITIGATION_SPECTRE_V1=y
 CONFIG_MITIGATION_SPECTRE_V2=y
 CONFIG_MITIGATION_SRBDS=y
 CONFIG_MITIGATION_SSB=y
+CONFIG_MITIGATION_ITS=y
 CONFIG_ARCH_HAS_ADD_PAGES=y
 
 #
@@ -758,7 +761,7 @@ CONFIG_KVM_VFIO=y
 CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
 CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
 CONFIG_KVM_COMPAT=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
+CONFIG_HAVE_KVM_IRQ_BYPASS=m
 CONFIG_HAVE_KVM_NO_POLL=y
 CONFIG_KVM_XFER_TO_GUEST_WORK=y
 CONFIG_HAVE_KVM_PM_NOTIFIER=y
@@ -2161,8 +2164,6 @@ CONFIG_ETHTOOL_NETLINK=y
 #
 # Device Drivers
 #
-CONFIG_HAVE_EISA=y
-# CONFIG_EISA is not set
 CONFIG_HAVE_PCI=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_PCI=y
@@ -2185,7 +2186,7 @@ CONFIG_PCIE_EDR=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
 CONFIG_PCI_STUB=m
 CONFIG_PCI_PF_STUB=m
 CONFIG_PCI_ATS=y
@@ -2402,7 +2403,6 @@ CONFIG_UNACCEPTED_MEMORY=y
 
 CONFIG_UEFI_CPER=y
 CONFIG_UEFI_CPER_X86=y
-CONFIG_IMX_SCMI_MISC_DRV=m
 
 #
 # Qualcomm firmware drivers
@@ -3019,6 +3019,7 @@ CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_AUTODETECT=y
 CONFIG_MD_BITMAP_FILE=y
+CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
@@ -4223,7 +4224,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ADC is not set
 CONFIG_KEYBOARD_ADP5588=m
 CONFIG_KEYBOARD_ADP5589=m
-# CONFIG_KEYBOARD_APPLESPI is not set
+CONFIG_KEYBOARD_APPLESPI=m
 CONFIG_KEYBOARD_ATKBD=y
 CONFIG_KEYBOARD_QT1050=m
 CONFIG_KEYBOARD_QT1070=m
@@ -6700,6 +6701,8 @@ CONFIG_DRM_PANIC_BACKGROUND_COLOR=0x000000
 CONFIG_DRM_PANIC_SCREEN="user"
 # CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
 # CONFIG_DRM_DEBUG_MODESET_LOCK is not set
+CONFIG_DRM_CLIENT_SELECTION=y
+CONFIG_DRM_CLIENT_SETUP=y
 CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_FBDEV_OVERALLOC=100
 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
@@ -7940,6 +7943,7 @@ CONFIG_HID_THRUSTMASTER=m
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_HID_UDRAW_PS3=m
 CONFIG_HID_U2FZERO=m
+CONFIG_HID_UNIVERSAL_PIDFF=m
 CONFIG_HID_WACOM=m
 CONFIG_HID_WIIMOTE=m
 CONFIG_HID_WINWING=m
@@ -8746,7 +8750,7 @@ CONFIG_QAT_VFIO_PCI=m
 # end of VFIO support for PCI devices
 
 CONFIG_VFIO_MDEV=m
-CONFIG_IRQ_BYPASS_MANAGER=y
+CONFIG_IRQ_BYPASS_MANAGER=m
 CONFIG_VIRT_DRIVERS=y
 CONFIG_VMGENID=y
 CONFIG_VBOXGUEST=m
@@ -8904,7 +8908,6 @@ CONFIG_WILCO_EC=m
 # CONFIG_WILCO_EC_DEBUGFS is not set
 # CONFIG_WILCO_EC_EVENTS is not set
 # CONFIG_WILCO_EC_TELEMETRY is not set
-# CONFIG_CZNIC_PLATFORMS is not set
 CONFIG_MELLANOX_PLATFORM=y
 CONFIG_MLXREG_HOTPLUG=m
 CONFIG_MLXREG_IO=m
@@ -9956,7 +9959,6 @@ CONFIG_PWM_LPSS_PLATFORM=m
 #
 # IRQ chip support
 #
-CONFIG_LAN966X_OIC=m
 # end of IRQ chip support
 
 # CONFIG_IPACK_BUS is not set
@@ -10508,7 +10510,7 @@ CONFIG_SECURITYFS=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_INFINIBAND=y
 CONFIG_SECURITY_NETWORK_XFRM=y
-# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_PATH=y
 # CONFIG_INTEL_TXT is not set
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_FORTIFY_SOURCE=y
@@ -10521,12 +10523,12 @@ CONFIG_FORTIFY_SOURCE=y
 # CONFIG_SECURITY_YAMA is not set
 # CONFIG_SECURITY_SAFESETID is not set
 # CONFIG_SECURITY_LOCKDOWN_LSM is not set
-# CONFIG_SECURITY_LANDLOCK is not set
+CONFIG_SECURITY_LANDLOCK=y
 # CONFIG_SECURITY_IPE is not set
 # CONFIG_INTEGRITY is not set
 # CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
 CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,landlock"
 
 #
 # Kernel hardening options
@@ -10771,13 +10773,13 @@ CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
 CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64=m
 CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64=m
 CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64=m
-CONFIG_CRYPTO_CHACHA20_X86_64=m
+CONFIG_CRYPTO_CHACHA20_X86_64=y
 CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
 CONFIG_CRYPTO_NHPOLY1305_SSE2=m
 CONFIG_CRYPTO_NHPOLY1305_AVX2=m
 CONFIG_CRYPTO_BLAKE2S_X86=y
 CONFIG_CRYPTO_POLYVAL_CLMUL_NI=m
-CONFIG_CRYPTO_POLY1305_X86_64=m
+CONFIG_CRYPTO_POLY1305_X86_64=y
 CONFIG_CRYPTO_SHA1_SSSE3=m
 CONFIG_CRYPTO_SHA256_SSSE3=m
 CONFIG_CRYPTO_SHA512_SSSE3=m
@@ -10872,16 +10874,19 @@ CONFIG_CRYPTO_LIB_ARC4=y
 CONFIG_CRYPTO_LIB_GF128MUL=y
 CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
+CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
 CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
+CONFIG_CRYPTO_LIB_CHACHA_INTERNAL=y
 CONFIG_CRYPTO_LIB_CHACHA=m
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m
+CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
 CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
+CONFIG_CRYPTO_LIB_CURVE25519_INTERNAL=m
 CONFIG_CRYPTO_LIB_CURVE25519=m
 CONFIG_CRYPTO_LIB_DES=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
-CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
+CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
 CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
+CONFIG_CRYPTO_LIB_POLY1305_INTERNAL=y
 CONFIG_CRYPTO_LIB_POLY1305=m
 CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LIB_SHA1=y

kernel/kernel-source.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2018, 2020, 2021, 2023, 2024  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2018, 2020, 2021, 2023, 2024, 2025  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -28,13 +28,13 @@ NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
 
-# If a $VERSION is not passed to this script, use the newest linux-*.tar.xz
+# If a $VERSION is not passed to this script, use the newest linux-*.tar.?z
 # found in this directory:
 VERSION=${VERSION:-$(/bin/ls -t linux-*.tar.?z | head -n 1 | rev | cut -f 3- -d . | rev | cut -f2- -d -)}
 if ! /bin/ls linux-*.tar.?z 1> /dev/null 2> /dev/null ; then
   echo "Error: kernel source not found. (/bin/ls linux-*.tar.?z)"
 else
-  USINGVER="Using kernel source linux-${VERSION}.tar.xz."
+  USINGVER="Using kernel source linux-${VERSION}.tar.?z."
 fi
 
 # This function will revert or apply patches that are present here.
@@ -226,7 +226,7 @@ echo "Untarring $CWD/linux-${VERSION}.tar.?z in $PKG/usr/src..."
 
   # Use the version number found in the Makefile in the package name. This is not
   # always the same as the version in the source tarball's filename. For example,
-  # linux-4.14.tar.xz will have 4.14.0 as the version in the Makefile:
+  # linux-4.14.tar.?z will have 4.14.0 as the version in the Makefile:
   PACKAGE_VERSION=$(grep "^VERSION = " Makefile | rev | cut -f 1 -d ' ' | rev).$(grep "^PATCHLEVEL = " Makefile | rev | cut -f 1 -d ' ' | rev).$(grep "^SUBLEVEL = " Makefile | rev | cut -f 1 -d ' ' | rev)$(grep "^EXTRAVERSION = " Makefile | rev | cut -f 1 -d ' ' | rev)
 
   if [ ! -r $KERNEL_CONFIGDIR/config-${PACKAGE_VERSION}${LOCALVERSION}${CONFIG_SUFFIX} ]; then
@@ -264,11 +264,11 @@ echo "Untarring $CWD/linux-${VERSION}.tar.?z in $PKG/usr/src..."
   rm .*.d
   # Still some dotfiles laying around... probably fine though
   # Get rid of any ELF (non-eBPF) binaries that are not executable:
-  find . -type f -perm 0644 | xargs file | grep ELF | grep -v eBPF | grep stripped | cut -f 1 -d : | while read elf_binary ; do
+  find . -type f -perm 0644 ! -name "*.c" ! -name "*.h" ! -name "*.S" ! -name "*.dts*" ! -name "Makefile*" ! -name Kbuild ! -name "*config" ! -name ".git*" ! -name "*.rst" ! -name "*.txt" | xargs file | grep ELF | grep -v eBPF | grep stripped | cut -f 1 -d : | while read elf_binary ; do
     rm -f -v $elf_binary
   done 
   # Strip any remaining binaries:
-  find . | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . -type f ! -name "*.c" ! -name "*.h" ! -name "*.S" ! -name "*.dts*" ! -name "Makefile*" ! -name Kbuild ! -name "*config" ! -name ".git*" ! -name "*.rst" ! -name "*.txt" | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 ) || exit 1
 
 # Just staging the sources? Then leave.
@@ -279,7 +279,7 @@ fi
 cd $PKG/usr/src/linux-*
 # Use the version number found in the Makefile in the package name. This is not
 # always the same as the version in the source tarball's filename. For example,
-# linux-4.14.tar.xz will have 4.14.0 as the version in the Makefile:
+# linux-4.14.tar.?z will have 4.14.0 as the version in the Makefile:
 PACKAGE_VERSION=$(grep "^VERSION = " Makefile | rev | cut -f 1 -d ' ' | rev).$(grep "^PATCHLEVEL = " Makefile | rev | cut -f 1 -d ' ' | rev).$(grep "^SUBLEVEL = " Makefile | rev | cut -f 1 -d ' ' | rev)$(grep "^EXTRAVERSION = " Makefile | rev | cut -f 1 -d ' ' | rev)
 
 ## Let's not do this because out-of-tree modules might not like it.

kernel/linux-6.12.33.tar.sign

@@ -0,0 +1,19 @@
+-----BEGIN PGP SIGNATURE-----
+Comment: This signature is for the .tar version of the archive
+Comment: git archive --format tar --prefix=linux-6.12.33/ v6.12.33
+Comment: git version 2.49.0
+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+=nAO1
+-----END PGP SIGNATURE-----

kernel/linux-6.12.7.tar.sign

@@ -1,19 +0,0 @@
------BEGIN PGP SIGNATURE-----
-Comment: This signature is for the .tar version of the archive
-Comment: git archive --format tar --prefix=linux-6.12.7/ v6.12.7
-Comment: git version 2.47.1
-
-iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmduphkACgkQONu9yGCS
-aT4saRAAtqjCsWez4R77WBWQMsFcA8Z2hj6zatT9bHG0JIv8dJPWvdYqBMRA+SPP
-mHuz+PyIJp2WLUPKuWCqFm4feVNC/LMLBZD6ev60oFGQh3SF2HavZWXws60mihJf
-hK898Y1seO2eZEiYS/kKWTw4YT/0y0+iBZ9llj0IKX01S2bLPCqUVUC9GJZrrQt1
-w1md8CvnqomCkf4LIx5IDjNzPQWk4N3SizHSLDXaeu9GJUSxZRg+R+E0vwXdb8Go
-RxApurVnyLXg9TPPaVNNygKGkuiD6QfI8oSSMyGCQ0tfNeXqF4kA1g68RQi1lJ3i
-dwOwdfKoVZIYbisyQxLOuycRHMB97Z+y52Z8mlKvF/vy99qs2DiHJvyTqiNTK22x
-m/Gg8DRstAitHRpbxdO0nnG5eKSQO4nZm1uID0mvS6BrGTbB/kVjkJJh4BLC7z7h
-XLfDcKY3wKSGAdGzzJkwKiNiO+biOEcH1YAZ6ibAMiS1k29XvCxjFzrA5jlwEYTt
-N5DpXbxlrag0WsP+i3iUTg+ejv3LEAlcRTuadJtjbhTlM8i+3ERWPq8eOW29Xmqo
-9XpUJ+1zlBYmVIEcpBBO88kg3K1xVp41anrKf6BbEgxfYXjTfdY7r/XszmT/WaNK
-dD8z7kjut14p/AMhtZ1jopuke+0VStXEy9Fc2W9UTr2sQMME0jY=
-=qKnK
------END PGP SIGNATURE-----

kvirc/README

@@ -0,0 +1,10 @@
+KVIrc is the K-Visual IRC Client. It's a free portable Internet
+Relay Chat client based on the excellent Qt GUI toolkit. KVIrc is
+being written by Szymon Stefanek and The KVIrc Development Team with
+the contribution of many IRC addicted developers around the world.
+It has a full GUI based configuration, floatable windows, built-in
+help browser, addons and themes support (configurable from GUI
+or scripting), transparency support, dran'n'drop toolbar editing,
+activity notifier as well as proxy support, SSL and IPv6 sockets
+support, a modular arch which loads modules only when necessary and a
+huge API for writing extensions

kvirc/doinst.sh

@@ -0,0 +1,14 @@
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x /usr/bin/update-mime-database ]; then
+  /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache -f usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+

kvirc/kvirc.SlackBuild

@@ -0,0 +1,120 @@
+#!/bin/bash
+
+# Slackware build script for KVIrc
+
+# Copyright 2011 Elvio "HelLViS69" Basello <hellvis69@slackware.it>
+# Copyright 2018 Matteo Bernardini <ponce@slackbuilds.org>, Pisa, Italy
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# 20220301 bkw: Modified by SlackBuilds.org: fix build on 15.0.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=kvirc
+SRCNAM=KVIrc
+VERSION=${VERSION:-5.2.8}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xf $CWD/$SRCNAM-$VERSION.tar.?z*
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+# use our *FLAGS
+sed -i "s|\"-O3|\"$SLKCFLAGS|" CMakeLists.txt
+
+# 20220301 bkw: older qt5 didn't need this, but Slackware 15.0's does:
+sed -i '1i#include <QPainterPath>' src/modules/iograph/libkviiograph.cpp
+
+mkdir build
+#cd build
+  cmake -GNinja \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DMANDIR=/usr/man \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DCMAKE_BUILD_TYPE:STRING="Release" \
+    -DWANT_PERL=ON \
+    -DWANT_AUDIOFILE=ON \
+    -DWANT_VERBOSE=ON \
+    -DWANT_STRIP=ON \
+    -DWANT_KDE=OFF \
+    -DWANT_PHONON=OFF \
+    -DWANT_QTWEBENGINE=OFF \
+    -B build
+  ninja -j$(nproc) -C build
+  DESTDIR=$PKG ninja -C build install
+#cd ..
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a COPYING README.md RELEASES doc/*LICENSE* $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

kvirc/kvirc.info

@@ -0,0 +1,10 @@
+PRGNAM="KVIrc"
+VERSION="5.2.8"
+HOMEPAGE="https://kvirc.net"
+DOWNLOAD="https://github.com/kvirc/KVIrc/archive/refs/tags/5.2.8/KVIrc-5.2.8.tar.gz"
+MD5SUM="cadd5844d06adb071491eb03acfcbe37"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Sergei Fedosoff"
+EMAIL="eleksir@gmail.com"

kvirc/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+kvirc: kvirc (The K-Visual IRC Client)
+kvirc:
+kvirc: KVIrc is a free portable Internet Relay Chat client based
+kvirc: on the excellent Qt GUI toolkit. KVIrc is being written by
+kvirc: Szymon Stefanek and The KVIrc Development Team with the
+kvirc: contribution of many IRC addicted developers around the
+kvirc: world
+kvirc:
+kvirc: Homepage: http://kvirc.net
+kvirc:
+kvirc:

opensc/README

@@ -0,0 +1,23 @@
+SmartCard utilities/libraries for PKCS#11/15 compatible cards
+
+This package provides a set of libraries and utilities to access
+smart cards. Its main focus is on cards that support cryptographic
+operations, and facilitate their use in security applications such
+as mail encryption, authentication, and digital signature. OpenSC
+implements the PKCS#11 API so applications supporting this API such
+as Mozilla Firefox and Thunderbird can use it. OpenSC implements the
+PKCS#15 standard and aims to be compatible with every software that
+does so, too.
+
+You may need to edit /etc/opensc.conf in order to use a particular
+backend and smartcard.
+
+Beware! Smartcards have usually a limited number of times you may try a
+wrong PIN/PUK combination before they become inoperable/permanently
+blocked. You have been warned!
+
+Since version 0.12.0, only one reader subsystem can be used and
+compiled in at the same time. The PCSC-LITE subsystem is used by
+default and it is suitable for most smartcards. If you need the
+OPENCT subsystem instead, you have to pass "OPENCT=1" to the script
+when building and have the optional dependency openct installed.

opensc/doinst.sh

@@ -0,0 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/opensc.conf.new
+
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi

opensc/opensc.SlackBuild

@@ -0,0 +1,134 @@
+#!/bin/bash
+
+# Slackware build script for opensc
+
+# Copyright 2008-2015  LukenShiro, Italy
+# Copyright 2018-2023  Matteo Bernardini <ponce@slackbuilds.org>, Pisa, Italy
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# 20220301 bkw: Modified by SlackBuilds.org, BUILD=2:
+# - add update-desktop-database to doinst.sh.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=opensc
+VERSION=${VERSION:-0.26.1}
+BUILD=${BUILD:-2}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+DOCFILES="README COPYING NEWS"
+XSL_STYLESHEETS_VER=$(export LS_OPTIONS='' ; ls -1 /usr/share/xml/docbook/ | grep xsl-stylesheets- | cut -d- -f3)
+
+# opensc now supports only one reader subsystem (pcsc-lite or openct)
+OPENCT=${OPENCT:-0}	# pcsc-lite is the default, openct disabled
+
+case "$OPENCT" in
+  0)	RDRSUBSYS_flags="--enable-pcsc --disable-openct" ;;
+  *)	RDRSUBSYS_flags="--disable-pcsc --enable-openct" ;;
+esac
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
+
+# --enable-nsplugin and --with-pinentry= are no longer supported.
+export CFLAGS="-g $SLKCFLAGS -rdynamic"
+export CXXFLAGS="-g $SLKCFLAGS -rdynamic"
+export LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2"
+
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --datarootdir=/usr/share \
+  --mandir=/usr/man \
+  --enable-doc \
+  --with-xsl-stylesheetsdir=/usr/share/xml/docbook/xsl-stylesheets-${XSL_STYLESHEETS_VER} \
+  $RDRSUBSYS_flags \
+  --enable-sm \
+  --enable-piv-sm \
+  --enable-pcsc \
+  --enable-static=no \
+  --build=$ARCH-slackware-linux
+
+make -j$(nproc)
+make install-strip DESTDIR=$PKG
+gzip -9 $PKG/usr/man/man*/*
+rm -f $PKG/usr/lib*/*.la
+
+# Don't clobber the config file
+mv $PKG/etc/opensc.conf $PKG/etc/opensc.conf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

opensc/opensc.info

@@ -0,0 +1,10 @@
+PRGNAM="opensc"
+VERSION="0.26.1"
+HOMEPAGE="https://github.com/OpenSC/OpenSC/wiki/"
+DOWNLOAD="https://github.com/OpenSC/OpenSC/releases/download/0.26.1/opensc-0.26.1.tar.gz"
+MD5SUM="dc3d9ff5131a66d756300fb5cf0d87c2"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="pcsc-lite"
+MAINTAINER="Matteo Bernardini"
+EMAIL="ponce@slackbuilds.org"

opensc/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+opensc: opensc (SmartCard utilities/libraries for PKCS#11/15 compatible cards)
+opensc:
+opensc: It provides a set of libraries and utilities to access smart
+opensc: cards. Its main focus is on cards that support cryptographic
+opensc: operations, and facilitate their use in security applications such
+opensc: as mail encryption, authentication, and digital signature. OpenSC
+opensc: implements the PKCS#11 API so applications supporting this API such
+opensc: as Mozilla Firefox and Thunderbird can use it. OpenSC implements
+opensc: the PKCS#15 standard and aims to be compatible with every software
+opensc: that does so, too.
+opensc: Homepage: http://www.opensc-project.org/opensc/

pcsc-lite/README

@@ -0,0 +1,19 @@
+PC/SC-lite is a middleware to access a smart card using SCard API
+(PC/SC) Its purpose is to provide a Windows(R) SCard interface in a
+very small form factor for communicating to smart cards and readers.
+
+Compiling with "DEBUGATR=1 ./pcsc-lite.SlackBuild" enables ATR parsing
+debug output messages.
+
+On-demand power on (auto power off) feature for an inserted card is
+disabled, now. If you want it re-enabled, so the card is powered off
+after a few seconds of inactivity (upstream's default since version
+1.6.5) you can compile with "AUTOPOFF=1 ./pcsc-lite.SlackBuild".
+
+pcsc-lite no longer uses (deprecated) libhal for smart-card reader's
+detection. By default libudev is used now.
+
+You need to add a user pcscd (257) and a group pcscd (257).
+
+Please see README.SLACKWARE in pcsc-lite's documentation directory
+for notes.

pcsc-lite/README.SLACKWARE

@@ -0,0 +1,32 @@
+You must have a "pcscd" user and a "pcscd" group to run this script.
+To create the user and group you can run these two commands
+(uid/gid are set accordingly to http://slackbuilds.org/uid_gid.txt):
+  # groupadd -g 257 pcscd
+  # useradd -u 257 -g pcscd -d /var/run/pcscd -s /bin/false pcscd
+
+To start PC/SC-lite daemon, run "/etc/rc.d/rc.pcscd start". This is most
+easily accomplished by adding the following to /etc/rc.d/rc.local:
+	if [ -x /etc/rc.d/rc.pcscd ]; then
+		/etc/rc.d/rc.pcscd start
+	fi
+For pcmcia readers, this daemon should be started after rc.pcmcia.
+
+Beware!
+- PC/SC-lite daemon is meant as _alternative_ to openct: running rc.openctd
+and rc.pcscd at the same time can and will lead to unforseeable problems
+(specially with usb devices that can be managed by both of them, one daemon
+can claim one device, making it unavailable for other daemon).
+
+Smartcard reader's drivers are not included and must be compiled and installed
+separately. See DRIVERS file in pcsc-lite's doc directory for more information
+on getting and installing specific drivers.  pcsc-lite is compiled with the 
+--enable-usbdropdir=<libdir>/pcsc/drivers flag -- this directory will be the 
+destination for usb readers' drivers (e.g. ccid, cardman, ...).
+
+Since version 1.6.0, serial support is not really maintained. Upstream
+developer deems serial readers as rare, so he no longer provides reader.conf
+file: if it's still required, you will have to manually create it in
+/etc/reader.conf.d (please see 'man 5 reader.conf' for details).
+
+Since version 1.6.0, events are sent through the socket, so you have to
+manually remove unused /var/run/pcscd/pcscd.events/ directory.

pcsc-lite/doinst.sh

@@ -0,0 +1,26 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.pcscd.new
+

pcsc-lite/pcsc-lite.SlackBuild

@@ -0,0 +1,180 @@
+#!/bin/bash
+
+# Slackware build script for pcsc-lite
+
+# Copyright 2007-2015  LukenShiro, Italy
+# Copyright 2020-2023  Matteo Bernardini <ponce@slackbuilds.org>, Pisa, Italy
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# 20230801 bkw: Modified by SlackBuilds.org, BUILD=2:
+# - handle user and group detection better.
+# - get rid of generic GNU INSTALL from doc dir.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=pcsc-lite
+VERSION=${VERSION:-1.9.9}
+BUILD=${BUILD:-4}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+# Bail out if user or group isn't valid on your system
+# For slackbuilds.org, assigned pcscd uid/gid are 257/257
+# See http://slackbuilds.org/uid_gid.txt
+# 20230801 bkw: grepping /etc/passwd and /etc/group may fail if e.g. NIS
+# or LDAP is in use; always use getent. Also, print both messages (for user
+# and group) if either doesn't exist.
+if ! getent group pcscd &>/dev/null || ! getent passwd pcscd &>/dev/null; then
+    echo "  You must have a \"pcscd\" user and group to run this script."
+    echo "    # groupadd -g 257 pcscd"
+    echo "    # useradd -u 257 -g pcscd -d /var/run/pcscd -s /bin/false pcscd"
+    exit 1
+fi
+
+# Debug is off by default
+DEBUGATR=${DEBUGATR:-0}
+# Inserted card's automatic poweroff (on-demand power on)
+AUTOPOFF=${AUTOPOFF:-0}		# disabled by default
+
+# README and README.DAEMON are not useful and partly outdated.
+DOCFILES="SECURITY ChangeLog* COPYING HELP NEWS TODO AUTHORS"
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} + -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} +
+
+# ATR (answer to reset) debug parsing output
+case "$DEBUGATR" in
+    0)  DEBUGATR_FLAG="dis" ;;
+    *)  DEBUGATR_FLAG="en" ;;
+esac
+
+# disabling/enabling card's automatic power off
+case "$AUTOPOFF" in
+    0)  sed -i "s|^\/\* #define DISABLE_ON_DEMAND_POWER_ON \*\/|#define DISABLE_ON_DEMAND_POWER_ON|" \
+       src/pcscd.h.in
+       ;;
+    *) ;;
+esac
+
+# --enable-runpid=/var/run/pcscd.pid, and
+# --enable-muscledropdir="<libdir>/pcsc/services" are not supported anymore;
+# pid directory changed to /var/run/pcscd for consistency
+# libhal support is gone
+# API docs not included anymore
+export CFLAGS="$SLKCFLAGS -rdynamic"
+export CXXFLAGS="$CFLAGS"
+export LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-s "
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --localstatedir=/var \
+  --enable-ipcdir=/var/run/pcscd \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-usbdropdir="/usr/lib${LIBDIRSUFFIX}/pcsc/drivers" \
+  --enable-confdir=/etc/reader.conf.d \
+  --${DEBUGATR_FLAG}able-debugatr \
+  --enable-libusb \
+  --disable-libudev \
+  --disable-libsystemd \
+  --build=$ARCH-slackware-linux
+
+make -j$(nproc)
+make install DESTDIR=$PKG
+
+# formaticc manpage is not automatically installed
+install -Dpm 0644 doc/formaticc.1 $PKG/usr/man/man1/
+
+# PC/SC-lite slackware-compliant daemon
+install -Dpm 0755 $CWD/rc.pcscd $PKG/etc/rc.d/rc.pcscd.new
+
+# Correct manpages in reader.conf.5 and pcscd.8
+sed -i "s|@confdir@|/etc/reader.conf.d|g" $PKG/usr/man/man5/reader.conf.5 || exit 1
+sed -i "s|@sysconfdir_exp@/init.d/pcscd|/etc/rc.d/rc.pcscd|g" $PKG/usr/man/man8/pcscd.8 || exit 1
+sed -i "s|@sysconfdir_exp@|/etc/reader.conf.d|g" $PKG/usr/man/man8/pcscd.8 || exit 1
+
+# Create the directory for drivers and such (not included with this package)
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/pcsc/{drivers,services}
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+# remove README.DAEMON, automatically installed by doc/Makefile.
+rm -f $PKG/usr/doc/$PRGNAM-$VERSION/README.DAEMON
+
+rm -f $PKG/usr/lib*/*.la
+
+install -Dpm 0644 $CWD/slack-desc $PKG/install/slack-desc
+install -Dpm 0644 $CWD/doinst.sh  $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

pcsc-lite/pcsc-lite.info

@@ -0,0 +1,10 @@
+PRGNAM="pcsc-lite"
+VERSION="1.9.9"
+HOMEPAGE="https://pcsclite.apdu.fr/"
+DOWNLOAD="https://pcsclite.apdu.fr/files/pcsc-lite-1.9.9.tar.bz2"
+MD5SUM="23db832115db702e902baccf21da13aa"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Matteo Bernardini"
+EMAIL="ponce@slackbuilds.org"

pcsc-lite/rc.pcscd

@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# Start/Stop/Restart the PC/SC-lite smart card daemon.
+#
+# pcscd should be started after pcmcia and shut down
+# before it for smooth experience with PCMCIA readers.
+#
+
+PIDFILE=/var/run/pcscd/pcscd.pid
+PCSCD_OPTS=""
+
+# Start
+pcscd_start() {
+  if [ -x /usr/sbin/pcscd ]; then
+    if [ -e "$PIDFILE" ]; then
+      echo "PC/SC-lite daemon already started!"
+    else
+      echo "Starting PC/SC-lite smart card daemon..."
+      /usr/sbin/pcscd $PCSCD_OPTS
+    fi
+  fi
+}
+
+# Stop
+pcscd_stop() {
+  echo "Stopping PC/SC-lite smart card daemon..."
+  if [ -e "$PIDFILE" ]; then
+      kill $(cat $PIDFILE)
+      rm -f $PIDFILE 2>&1 >/dev/null
+  fi
+  # Just in case:
+  killall pcscd 2>&1 >/dev/null
+}
+
+# Restart
+pcscd_restart() {
+  pcscd_stop
+  sleep 3
+  pcscd_start
+}
+
+# Status
+pcscd_status() {
+  if [ -e "$PIDFILE" ]; then
+    echo "pcscd is running."
+  else
+    echo "pcscd is stopped."
+  fi
+}
+
+case "$1" in
+'start')
+  pcscd_start
+  ;;
+'stop')
+  pcscd_stop
+  ;;
+'restart')
+  pcscd_restart
+  ;;
+'status')
+  pcscd_status
+  ;;
+*)
+  echo "usage: $0 start|stop|restart|status"
+esac

pcsc-lite/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+         |-----handy-ruler------------------------------------------------------|
+pcsc-lite: pcsc-lite (Middleware to access a smart card using SCard API)
+pcsc-lite:
+pcsc-lite: Middleware to access a smart card using SCard API (PC/SC)
+pcsc-lite: Its purpose is to provide a Windows(R) SCard interface in a
+pcsc-lite: very small form factor for communicating to smart cards and
+pcsc-lite: readers.
+pcsc-lite:
+pcsc-lite: Homepage: https://pcsclite.apdu.fr/
+pcsc-lite:
+pcsc-lite:
+pcsc-lite:

weechat/weechat.SlackBuild

@@ -28,7 +28,7 @@
 cd $(dirname $0) ; CWD=$(pwd)
 
 PRGNAM=weechat
-VERSION=${VERSION:-4.5.1}
+VERSION=${VERSION:-4.6.3}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 PKGTYPE=${PKGTYPE:-tgz}

weechat/weechat.info

@@ -1,8 +1,8 @@
 PRGNAM="weechat"
-VERSION="4.5.1"
+VERSION="4.6.3"
 HOMEPAGE="https://www.weechat.org"
-DOWNLOAD="https://weechat.org/files/src/weechat-4.5.1.tar.xz"
+DOWNLOAD="https://weechat.org/files/src/weechat-4.6.3.tar.xz"
-MD5SUM="27df844a481201f7da0d03fa06d6af86"
+MD5SUM="96dc2d0d883cf61f504144552f30dd31"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""

yubico-piv-tool/README

@@ -0,0 +1,6 @@
+The Yubico PIV tool is used for interacting with the Personal Identity
+Verification (PIV) application on a YubiKey.
+
+With it you may generate keys on the device, importing keys and
+certificates, and create certificate requests, and other operations. A
+shared library and a command-line tool is included.

yubico-piv-tool/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+               |-----handy-ruler------------------------------------------------------|
+yubico-piv-tool: yubico-piv-tool (tool for interacting with YubiKey PIV)
+yubico-piv-tool:
+yubico-piv-tool: The Yubico PIV tool is used for interacting with the Personal
+yubico-piv-tool: Identity Verification (PIV) application on a YubiKey.
+yubico-piv-tool:
+yubico-piv-tool: With it you may generate keys on the device, importing keys
+yubico-piv-tool: and certificates, and create certificate requests, and other
+yubico-piv-tool: operations.
+yubico-piv-tool:
+yubico-piv-tool: A shared library and a command-line tool is included.
+yubico-piv-tool:

yubico-piv-tool/slack-required

@@ -0,0 +1,4 @@
+gengetopt
+pcsc-lite
+opensc
+ccid

yubico-piv-tool/yubico-piv-tool.SlackBuild

@@ -0,0 +1,117 @@
+#!/bin/bash
+
+# Slackware build script for yubico-piv-tool
+
+# Copyright 2024 pyllyukko
+# Copyright 2025 Sergei Fedosoff <eleksir@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=yubico-piv-tool
+VERSION=${VERSION:-2.7.2}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/$TAG}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "aarch64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+export CFLAGS="$SLKCFLAGS -rdynamic"
+export CXXFLAGS="$CFLAGS"
+export LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-s "
+
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS -rdynamic" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS -rdynamic" \
+    -DCMAKE_EXE_LINKER_FLAGS:STRING="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX} \
+    -DYKPIV_INSTALL_MAN_DIR=/usr/man \
+    -DCMAKE_BUILD_TYPE=Release ..
+  make -j$(nproc)
+  make install/strip DESTDIR=$PKG
+cd ..
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYING NEWS \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+install -Dpm 0644 $CWD/slack-desc     $PKG/install/slack-desc
+install -Dpm 0644 $CWD/slack-required $PKG/install/slack-required
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

yubico-piv-tool/yubico-piv-tool.info

@@ -0,0 +1,10 @@
+PRGNAM="yubico-piv-tool"
+VERSION="2.7.2"
+HOMEPAGE="https://developers.yubico.com/yubico-piv-tool/"
+DOWNLOAD="https://developers.yubico.com/yubico-piv-tool/Releases/yubico-piv-tool-2.7.2.tar.gz"
+MD5SUM="b50e3e3026ed4097c15f684cb99d13da"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="gengetopt pcsc-lite"
+MAINTAINER="pyllyukko"
+EMAIL="pyllyukko@maimed.org"

znc/znc.SlackBuild

@@ -26,7 +26,7 @@
 # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=znc
-VERSION=${VERSION:-1.9.0}
+VERSION=${VERSION:-1.10.1}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 
@@ -83,11 +83,13 @@ find -L . \
 
 mkdir build
 cd build
+# Since 1.10.0 we need to select wt5 explicitly, as it binds to qt6 by default.
+export ZNC_QT_VER=5
 cmake -GNinja \
     -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-    -DCMAKE_C_FLAGS:STRING="-g $SLKCFLAGS -rdynamic" \
+    -DCMAKE_C_FLAGS:STRING="-g $SLKCFLAGS" \
-    -DCMAKE_CXX_FLAGS:STRING="-g $SLKCFLAGS -rdynamic" \
+    -DCMAKE_CXX_FLAGS:STRING="-g $SLKCFLAGS" \
-    -DCMAKE_EXE_LINKER_FLAGS:STRING="-flto -rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2" \
+    -DCMAKE_EXE_LINKER_FLAGS:STRING="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2" \
     -DCMAKE_INSTALL_PREFIX=/usr \
     -DMANDIR=/usr/man \
     -DLIBDIR=/usr/lib${LIBDIRSUFFIX} \
@@ -96,7 +98,7 @@ cmake -GNinja \
     -DWANT_ICU=ON \
     -DWANT_IPV6=ON \
     -DWANT_OPENSSL=ON \
-    -DWANT_PERL=ON \
+    -DWANT_PERL=OFF \
     -DWANT_PYTHON=ON \
     -DWANT_SWIG=ON \
     -DWANT_TCL=ON \

znc/znc.info

@@ -1,8 +1,8 @@
 PRGNAM="znc"
-VERSION="1.9.0"
+VERSION="1.10.1"
 HOMEPAGE="https://wiki.znc.in/ZNC"
-DOWNLOAD="https://znc.in/releases/archive/znc-1.9.0.tar.gz"
+DOWNLOAD="https://znc.in/releases/znc-1.10.1.tar.gz"
-MD5SUM="28c948af16e4b9307760d9fa951abf74"
+MD5SUM="6b2ffec8c6507ddcaff854457022a832"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""