docker: bump 24.0.7 -> 26.1.2

alsa-lib/alsa-lib.SlackBuild

@@ -0,0 +1,159 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2012, 2013, 2015, 2016, 2018, 2019, 2020, 2021  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=alsa-lib
+VERSION=${VERSION:-$(echo alsa-lib-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-alsa-lib
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# If this package is being built for ALSA (no PulseAudio), use the _alsa $TAG:
+if [ ! -r /usr/lib${LIBDIRSUFFIX}/pkgconfig/libpulse.pc ]; then
+  TAG="_alsa"
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.txz"
+  exit 0
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf alsa-lib-$VERSION
+tar xvf $CWD/alsa-lib-$VERSION.tar.?z || exit 1
+cd alsa-lib-$VERSION || exit 1
+
+# Fix file missing in 1.1.6:
+if [ ! -r src/conf/smixer.conf ]; then
+  cp -a $CWD/smixer.conf src/conf
+fi
+
+# Untar the configuration files. We'll install them later.
+( mkdir ucm-and-topology-configs
+  cd ucm-and-topology-configs
+  for file in $CWD/alsa-*conf*tar.lz ; do
+    tar xvf $file
+    mv $(basename $file | cut -f 1-3 -d -)-*/* .
+    rmdir $(basename $file | cut -f 1-3 -d -)-*
+    mv README.md README-$(echo $(basename $file) | cut -f 1-3 -d -)
+  done
+)
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+ ./configure \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --enable-mixer-modules \
+  --enable-topology \
+  --enable-ucm \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir $PKG/etc
+if [ "$TAG" = "_alsa" ]; then
+  # Ship an empty asound.conf for ALSA-only system:
+  cp -a $CWD/asound.conf.alsa $PKG/etc/asound.conf.new
+else
+  # Redirect to PulseAudio:
+  cp -a $CWD/asound.conf.pulse $PKG/etc/asound.conf.new
+fi
+chmod 644 $PKG/etc/asound.conf.new
+chown root:root $PKG/etc/asound.conf.new
+
+# Install ucm and topology configs:
+( cd ucm-and-topology-configs ; tar cf - . ) | ( cd $PKG/usr/share/alsa ; tar xf -)
+
+# TODO?
+# ( cd src/pcm/ext
+# make jack
+# make jack-install )
+
+mkdir -p $PKG/usr/doc/alsa-lib-$VERSION
+cp -a \
+  INSTALL MEMORY-LEAK NOTES TODO \
+  $PKG/usr/doc/alsa-lib-$VERSION
+cp -a COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.lib
+cp -a aserver/COPYING $PKG/usr/doc/alsa-lib-$VERSION/COPYING.aserver
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/alsa-lib-$VERSION-$ARCH-$BUILD$TAG.txz
+

alsa-lib/alsa-lib.url

@@ -0,0 +1 @@
+ftp://ftp.alsa-project.org/pub

alsa-lib/asound.conf.alsa

@@ -0,0 +1 @@
+# ALSA system-wide config file

alsa-lib/asound.conf.pulse

@@ -0,0 +1,4 @@
+# ALSA system-wide config file
+# By default, redirect to PulseAudio:
+pcm.default pulse
+ctl.default pulse

alsa-lib/doinst.sh

@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/asound.conf.new

alsa-lib/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+alsa-lib: alsa-lib (Advanced Linux Sound Architecture library)
+alsa-lib:
+alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+alsa-lib: functionality to the Linux operating system. This is the ALSA library
+alsa-lib: (libasound) which is used by audio applications.
+alsa-lib:
+alsa-lib: For more information, see http://alsa-project.org
+alsa-lib:
+alsa-lib:
+alsa-lib:
+alsa-lib:

alsa-lib/smixer.conf

@@ -0,0 +1,13 @@
+_full smixer-python.so
+usb {
+	searchl "USB"
+	lib smixer-usb.so
+}
+ac97 {
+	searchl "AC97a:"
+	lib smixer-ac97.so
+}
+hda {
+	searchl "HDA:"
+	lib smixer-hda.so
+}

alsa-plugins/alsa-plugins.SlackBuild

@@ -0,0 +1,115 @@
+#!/bin/bash
+
+# Copyright 2015, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=alsa-plugins
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-3}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# If this package is being built for ALSA (no PulseAudio), use the _alsa $TAG:
+if [ ! -r /usr/lib${LIBDIRSUFFIX}/pkgconfig/libpulse.pc ]; then
+  TAG="_alsa"
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.txz"
+  exit 0
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS -DHAVE_STDINT_H -DUSE_LIBSPEEX" \
+CXXFLAGS="$SLKCFLAGS -DHAVE_STDINT_H -DUSE_LIBSPEEX" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --with-speex=lib \
+  --enable-maemo-plugin \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install-strip DESTDIR=$PKG || exit 1
+
+# Remove symlink that's breaking audio:
+rm -f $PKG/etc/alsa/conf.d/98-maemo.conf
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  doc/*.txt doc/README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD$TAG.txz

alsa-plugins/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+            |-----handy-ruler------------------------------------------------------|
+alsa-plugins: alsa-plugins (Advanced Linux Sound Architecture Plugins)
+alsa-plugins:
+alsa-plugins: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+alsa-plugins: functionality to the Linux operating system.
+alsa-plugins: This package includes plugins for ALSA.
+alsa-plugins:
+alsa-plugins: Website: http://www.alsa-project.org
+alsa-plugins:
+alsa-plugins:
+alsa-plugins:
+alsa-plugins:

alsa-utils/alsa-utils.SlackBuild

@@ -0,0 +1,144 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2015, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=alsa-utils
+VERSION=${VERSION:-$(echo alsa-utils-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-alsa-utils
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf alsa-utils-$VERSION
+tar xvf $CWD/alsa-utils-$VERSION.tar.?z || exit 1
+cd alsa-utils-$VERSION || exit 1
+
+# Better off just disabling alsaconf...
+#zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --disable-alsaconf \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.alsa > $PKG/etc/rc.d/rc.alsa.new
+chmod 0644 $PKG/etc/rc.d/rc.alsa.new
+cat $CWD/rc.alsa-oss > $PKG/etc/rc.d/rc.alsa-oss.new
+chmod 0644 $PKG/etc/rc.d/rc.alsa-oss.new
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/alsa-utils-$VERSION
+cp -a \
+  COPYING INSTALL TODO \
+  seq/aconnect/README.aconnect \
+  seq/aseqnet/README.aseqnet \
+  $PKG/usr/doc/alsa-utils-$VERSION
+cp -a alsamixer/README $PKG/usr/doc/alsa-utils-$VERSION/README.alsamixer
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/alsa-utils-$VERSION-$ARCH-$BUILD.txz
+

alsa-utils/alsa-utils.alsaconf.diff

@@ -0,0 +1,59 @@
+--- ./alsaconf/alsaconf.in.orig	2010-04-16 06:11:06.000000000 -0500
++++ ./alsaconf/alsaconf.in	2010-05-29 21:08:39.000000000 -0500
+@@ -50,7 +50,9 @@
+ }
+ 
+ # Check for GNU/Linux distributions
+-if [ -f /etc/SuSE-release ]; then
++if [ -f /etc/slackware-version ]; then
++  distribution="slackware"
++elif [ -f /etc/SuSE-release ]; then
+   distribution="suse"
+   suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//)
+ elif [ -f /etc/UnitedLinux-release ]; then
+@@ -302,10 +304,12 @@
+ else
+ if [ "$distribution" = "gentoo" ]; then
+   cfgfile="/etc/modules.d/alsa"
++elif [ "$distribution" = "slackware" ]; then
++  cfgfile="/etc/modprobe.d/sound.conf"
+ elif [ "$kernel" = "new" ]; then
+   cfgfile="/etc/modprobe.conf"
+   if [ -d /etc/modprobe.d ]; then
+-    cfgout="/etc/modprobe.d/50-sound.conf"
++    cfgout="/etc/modprobe.d/sound.conf"
+     cfgoldout="/etc/modprobe.d/sound"
+     if [ ! -f $cfgout ]; then
+ 	modver=$(modprobe -V | sed -e's/^module-init-tools version //')
+--- ./alsaconf/alsaconf.8.orig	2010-04-16 06:11:06.000000000 -0500
++++ ./alsaconf/alsaconf.8	2010-05-29 21:07:51.000000000 -0500
+@@ -16,8 +16,6 @@
+ This manual page documents briefly the
+ .B alsaconf
+ command.
+-This manual page was written for the Debian distribution because the
+-original program does not have a manual page.
+ .PP
+ \fBAlsaconf\fP is a simple shell script which tries to detect the sound cards
+ on your system and writes a suitable configuration file for ALSA. It will try
+@@ -74,13 +72,6 @@
+ Set the uid for the ALSA devices (default = 0).
+ This option is obsolete in the recent ALSA version.
+ 
+-.SH DEBIAN SPECIFIC
+-In Debian, the default gid of the device files is 29 (corresponding to the
+-audio group) and the default device mode is 0660.
+-
+-For the ALSA base package, see also
+-.I /usr/share/doc/alsa\-base/
+-
+ .SH SEE ALSO
+ \fB
+ alsamixer(1),
+@@ -98,5 +89,4 @@
+ Bernd Kaindl <bk@suse.de> and
+ Jan Ondrej (SAL) <ondrejj@salstar.sk>
+ 
+-This manual page was written by Jordi Mallach <jordi@debian.org>,
+-for the Debian system (but may be used by others).
++This manual page was written by Jordi Mallach <jordi@debian.org>.

alsa-utils/alsa-utils.url

@@ -0,0 +1 @@
+ftp://ftp.alsa-project.org/pub

alsa-utils/doinst.sh

@@ -0,0 +1,27 @@
+if [ -r etc/asound.state -a ! -r var/lib/alsa/asound.state -a ! -L etc/asound.state ]; then
+  mv etc/asound.state var/lib/alsa
+fi
+# Better a dangling symlink than for nobody to know where this went:
+rm -f etc/asound.state
+( cd etc && ln -sf ../var/lib/alsa/asound.state . )
+
+# Duplicate permissions from any existing rc scripts:
+if [ -e etc/rc.d/rc.alsa ]; then
+  if [ -x etc/rc.d/rc.alsa ]; then
+    chmod 755 etc/rc.d/rc.alsa.new
+  else
+    chmod 644 etc/rc.d/rc.alsa.new
+  fi
+fi
+if [ -e etc/rc.d/rc.alsa-oss ]; then
+  if [ -x etc/rc.d/rc.alsa-oss ]; then
+    chmod 755 etc/rc.d/rc.alsa-oss.new
+  else
+    chmod 644 etc/rc.d/rc.alsa-oss.new
+  fi
+fi
+
+# Move the scripts into place:
+mv etc/rc.d/rc.alsa.new etc/rc.d/rc.alsa
+mv etc/rc.d/rc.alsa-oss.new etc/rc.d/rc.alsa-oss
+

alsa-utils/rc.alsa

@@ -0,0 +1,87 @@
+#!/bin/sh
+# Load the mixer settings and OSS compatibility (if enabled) for ALSA.
+# (the Advanced Linux Sound Architecture)
+
+# A function to load the ALSA mixer settings:
+load_alsa_mixer() {
+  if [ -r /var/lib/alsa/asound.state ]; then
+    echo "Loading ALSA mixer settings:  /usr/sbin/alsactl restore"
+    /usr/sbin/alsactl restore
+  else
+    # It's possible a user might not want to set a default sound state.
+    # In that case, do this:  touch /var/lib/alsa/no.asound.state
+    if [ ! -r /var/lib/alsa/no.asound.state ]; then
+      echo "Setting default ALSA mixer settings."
+      # set default mixer volumes for ALSA
+      # Taken from the alsaconf script.
+      amixer -s -q <<EOF
+set Master 75% unmute
+set Master -12dB
+set 'Master Mono' 75% unmute
+set 'Master Mono' -12dB
+set Front 75% unmute
+set Front -12dB
+set PCM 90% unmute
+set PCM 0dB
+mixer Synth 90% unmute
+mixer Synth 0dB
+mixer CD 90% unmute
+mixer CD 0dB
+# mute mic
+set Mic 0% mute
+# ESS 1969 chipset has 2 PCM channels
+set PCM,1 90% unmute
+set PCM,1 0dB
+# Trident/YMFPCI/emu10k1
+set Wave 100% unmute
+set Music 100% unmute
+set AC97 100% unmute
+# CS4237B chipset:
+set 'Master Digital' 75% unmute
+# Envy24 chips with analog outs
+set DAC 90% unmute
+set DAC -12dB
+set DAC,0 90% unmute
+set DAC,0 -12dB
+set DAC,1 90% unmute
+set DAC,1 -12dB
+# some notebooks use headphone instead of master
+set Headphone 75% unmute
+set Headphone -12dB
+set Playback 100% unmute
+# turn off digital switches
+set "SB Live Analog/Digital Output Jack" off
+set "Audigy Analog/Digital Output Jack" off
+EOF
+      echo "Storing default ALSA mixer settings:  /usr/sbin/alsactl store"
+      /usr/sbin/alsactl store
+    fi
+  fi
+}
+
+# If udev or something else has loaded the ALSA modules, then
+# simply load the mixer settings and make sure the OSS compat
+# modules are loaded (if enabled):
+if [ -d /proc/asound ]; then
+  if [ -x /etc/rc.d/rc.alsa-oss ]; then
+    sh /etc/rc.d/rc.alsa-oss
+  fi
+  load_alsa_mixer
+else
+  # If there are ALSA modules defined in /etc/modprobe.d/*, but
+  # ALSA is not yet loaded, then load the modules now:
+  DRIVERS=$(modprobe -c | grep -E "^[[:space:]]*alias[[:space:]]+snd-card-[[:digit:]]" | tr -s "[[:blank:]]" " " | cut -d " " -f 3)
+  if [ ! "$DRIVERS" = "" ]; then
+    echo "Loading ALSA kernel modules."
+    for module in $DRIVERS; do
+      modprobe $module
+    done
+  fi
+  # If ALSA is now up, then load the mixer settings and OSS modules (if enabled):
+  if [ -d /proc/asound ]; then
+    if [ -x /etc/rc.d/rc.alsa-oss ]; then
+      sh /etc/rc.d/rc.alsa-oss
+    fi
+    load_alsa_mixer
+  fi
+fi

alsa-utils/rc.alsa-oss

@@ -0,0 +1,24 @@
+#!/bin/sh
+# Load the ALSA OSS kernel modules to support OSS applications.
+# To use this, set this script as executable (chmod 755 rc.alsa-oss)
+# and it will be run from the main rc.alsa script.  Unless you know
+# that something requires OSS support, it is better to leave this
+# script disabled.  Some applications will try OSS first even though
+# they also support ALSA, and will block other applications from
+# using audio I/O.
+#
+# Many programs that use OSS can be run using the aoss wrapper and
+# will then use ALSA in a non-blocking way (and will not require
+# loading these kernel modules).  Consider trying that before enabling
+# these modules.  (See "man aoss")
+
+if modprobe -c | tr _ - | grep -wq snd-pcm-oss ; then
+  if ! cat /proc/modules | tr _ - | grep -wq snd-pcm-oss ; then
+    echo "Loading OSS compatibility modules for ALSA."
+    # Use -b to enable blacklisting these modules:
+    modprobe -q -b snd-pcm-oss
+    modprobe -q -b snd-seq-oss
+    modprobe -q -b snd-mixer-oss
+  fi
+fi
+

alsa-utils/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) 
+alsa-utils:
+alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+alsa-utils: functionality to the Linux operating system. This package contains
+alsa-utils: command line audio utilities for use with ALSA:
+alsa-utils:  alsactl        (manage soundcard settings)
+alsa-utils:  arecord/aplay  (capture and play audio)
+alsa-utils:  amixer         (adjust mixer settings from the command line)
+alsa-utils:  alsamixer      (an ncurses-based console mixer)
+alsa-utils:
+alsa-utils: For more information, see http://alsa-project.org

containerd/containerd.SlackBuild

@@ -26,8 +26,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=containerd
-VERSION=${VERSION:-1.7.8}
+VERSION=${VERSION:-1.7.16}
-GITHASH=${GITHASH:-8e4b0bd}
+GITHASH=${GITHASH:-8303183}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 

containerd/containerd.info

@@ -1,10 +1,10 @@
 PRGNAM="containerd"
-VERSION="1.7.8"
+VERSION="1.7.16"
 HOMEPAGE="https://containerd.io/"
 DOWNLOAD="UNSUPPORTED"
 MD5SUM=""
-DOWNLOAD_x86_64="https://github.com/containerd/containerd/archive/v1.7.8/containerd-1.7.8.tar.gz"
+DOWNLOAD_x86_64="https://github.com/containerd/containerd/archive/v1.7.16/containerd-1.7.16.tar.gz"
-MD5SUM_x86_64="8fdec29052484dd4e11186014dab9f46"
+MD5SUM_x86_64=""
 BUILDREQUIRES="google-go-lang"
 REQUIRES="runc"
 MAINTAINER="Sergei Fedosoff"

docker-cli/docker-cli.SlackBuild

@@ -25,8 +25,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=docker-cli
-VERSION=${VERSION:-24.0.7}
+VERSION=${VERSION:-26.1.2}
-GITHASH=${GITHASH:-afdd53b}
+GITHASH=${GITHASH:-211e74b}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 

docker-cli/docker-cli.info

@@ -1,10 +1,10 @@
 PRGNAM="docker-cli"
-VERSION="24.0.7"
+VERSION="26.1.2"
 HOMEPAGE="https://www.docker.com/products/container-runtime"
 DOWNLOAD="UNSUPPORTED"
 MD5SUM=""
-DOWNLOAD_x86_64="https://github.com/docker/cli/archive/v24.0.7/cli-24.0.7.tar.gz"
+DOWNLOAD_x86_64="https://github.com/docker/cli/archive/v26.1.2/cli-26.1.2.tar.gz"
-MD5SUM_x86_64="953bf757e181dec46ee4ac815553f2a6"
+MD5SUM_x86_64="64f33ed93d8ccaa8901497cbf6eadd9c"
 BUILDREQUIRES="google-go-lang"
 REQUIRES="docker"
 MAINTAINER="Sergei Fedosoff"

docker/docker.SlackBuild

@@ -26,9 +26,9 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=docker
-VERSION=${VERSION:-24.0.7}
+VERSION=${VERSION:-26.1.2}
 # short hash!
-GITHASH=${GITHASH:-311b9ff}
+GITHASH=${GITHASH:-ef1912d}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 

docker/docker.info

@@ -1,10 +1,10 @@
 PRGNAM="docker"
-VERSION="24.0.7"
+VERSION="26.1.2"
 HOMEPAGE="https://www.docker.com/products/container-runtime"
 DOWNLOAD="UNSUPPORTED"
 MD5SUM=""
-DOWNLOAD_x86_64="https://github.com/moby/moby/archive/v24.0.7/moby-24.0.7.tar.gz"
+DOWNLOAD_x86_64="https://github.com/moby/moby/archive/v26.1.2/moby-26.1.2.tar.gz"
-MD5SUM_x86_64="059ed51462797354f39e630d3d2257ef"
+MD5SUM_x86_64="bce03db33b26c6e92788e1afe4daba38"
 REQUIRES="containerd docker-cli tini"
 BUILDREQUIRES="google-go-lang"
 MAINTAINER="Sergei Fedosoff"

pulseaudio/0001-client-conf-Add-allow-autospawn-for-root.patch

@@ -0,0 +1,79 @@
+From 1cb5647f76dc8cd7bacbce2a64fac9e6c2dc3b16 Mon Sep 17 00:00:00 2001
+From: Tanu Kaskinen <tanu.kaskinen at linux.intel.com>
+Date: Tue, 28 Apr 2015 14:32:43 +0300
+Subject: [PATCH] client-conf: Add allow-autospawn-for-root
+
+Usually autospawning for root is a bad idea, since it can easily
+interfere with other users' PulseAudio instances, but in embedded
+environments where only root exists, autospawning is fine.
+
+Upstream-Status: Submitted [http://thread.gmane.org/gmane.comp.audio.pulseaudio.general/23549]
+
+Signed-off-by: Tanu Kaskinen <tanu.kaskinen at linux.intel.com>
+---
+ man/pulse-client.conf.5.xml.in | 9 +++++++++
+ src/pulse/client-conf.c        | 1 +
+ src/pulse/client-conf.h        | 1 +
+ src/pulse/client.conf.in       | 1 +
+ src/pulse/context.c            | 2 +-
+ 5 files changed, 13 insertions(+), 1 deletion(-)
+
+--- ./man/pulse-client.conf.5.xml.in.orig	2016-05-10 07:28:04.000000000 -0500
++++ ./man/pulse-client.conf.5.xml.in	2016-06-22 13:39:30.494696654 -0500
+@@ -82,6 +82,15 @@
+     </option>
+ 
+     <option>
++      <p><opt>allow-autospawn-for-root=</opt> Allow autospawning also for root.
++      Takes a boolean value, defaults to <opt>no</opt>. If the <opt>autospawn
++      </opt> option is disabled, this option has no effect. Autospawning for
++      root is disabled by default, because running PulseAudio as root will
++      interfere with regular users' PulseAudio instances. This option should be
++      enabled only in environments where there are no regular users at all.</p>
++    </option>
++
++    <option>
+       <p><opt>daemon-binary=</opt> Path to the PulseAudio daemon to
+       run when autospawning. Defaults to a path configured at compile
+       time.</p>
+--- ./src/pulse/client.conf.in.orig	2016-05-03 01:17:39.000000000 -0500
++++ ./src/pulse/client.conf.in	2016-06-22 13:39:30.527696657 -0500
+@@ -23,6 +23,7 @@
+ ; default-dbus-server =
+ 
+ ; autospawn = yes
++; allow-autospawn-for-root = no
+ ; daemon-binary = @PA_BINARY@
+ ; extra-arguments = --log-target=syslog
+ 
+--- ./src/pulse/client-conf.c.orig	2016-05-10 07:28:04.000000000 -0500
++++ ./src/pulse/client-conf.c	2016-06-22 13:39:30.505696655 -0500
+@@ -138,6 +138,7 @@
+         { "default-server",         pa_config_parse_string,   &c->default_server, NULL },
+         { "default-dbus-server",    pa_config_parse_string,   &c->default_dbus_server, NULL },
+         { "autospawn",              pa_config_parse_bool,     &c->autospawn, NULL },
++        { "allow-autospawn-for-root", pa_config_parse_bool,   &c->allow_autospawn_for_root, NULL },
+         { "cookie-file",            pa_config_parse_string,   &c->cookie_file_from_client_conf, NULL },
+         { "disable-shm",            pa_config_parse_bool,     &c->disable_shm, NULL },
+         { "enable-shm",             pa_config_parse_not_bool, &c->disable_shm, NULL },
+--- ./src/pulse/context.c.orig	2016-06-01 05:50:54.000000000 -0500
++++ ./src/pulse/context.c	2016-06-22 13:39:30.536696657 -0500
+@@ -1027,7 +1027,7 @@
+     if (!(flags & PA_CONTEXT_NOAUTOSPAWN) && c->conf->autospawn) {
+ 
+ #ifdef HAVE_GETUID
+-        if (getuid() == 0)
++        if (!c->conf->allow_autospawn_for_root && getuid() == 0)
+             pa_log_debug("Not doing autospawn since we are root.");
+         else {
+             c->do_autospawn = true;
+--- ./src/pulse/client-conf.h.orig	2016-06-22 13:39:30.517696656 -0500
++++ ./src/pulse/client-conf.h	2016-06-22 13:40:11.754699631 -0500
+@@ -38,6 +38,7 @@
+     char *cookie_file_from_application;
+     char *cookie_file_from_client_conf;
+     bool autospawn, disable_shm, disable_memfd, auto_connect_localhost, auto_connect_display;
++    bool allow_autospawn_for_root;
+     size_t shm_size;
+ } pa_client_conf;
+ 

pulseaudio/0002-allow-autospawn-for-root-default.diff

@@ -0,0 +1,27 @@
+--- ./man/pulse-client.conf.5.xml.in.orig	2016-01-06 15:33:09.797022947 -0600
++++ ./man/pulse-client.conf.5.xml.in	2016-01-06 15:35:34.902019857 -0600
+@@ -73,10 +73,7 @@
+     <option>
+       <p><opt>allow-autospawn-for-root=</opt> Allow autospawning also for root.
+       Takes a boolean value, defaults to <opt>no</opt>. If the <opt>autospawn
+-      </opt> option is disabled, this option has no effect. Autospawning for
+-      root is disabled by default, because running PulseAudio as root will
+-      interfere with regular users' PulseAudio instances. This option should be
+-      enabled only in environments where there are no regular users at all.</p>
++      </opt> option is disabled, this option has no effect.</p>
+     </option>
+ 
+     <option>
+--- ./src/pulse/client.conf.in.orig	2016-01-06 15:33:09.800022947 -0600
++++ ./src/pulse/client.conf.in	2016-01-06 15:39:33.502014775 -0600
+@@ -22,8 +22,8 @@
+ ; default-server =
+ ; default-dbus-server =
+ 
+-; autospawn = yes
+-; allow-autospawn-for-root = no
++autospawn = yes
++allow-autospawn-for-root = yes
+ ; daemon-binary = @PA_BINARY@
+ ; extra-arguments = --log-target=syslog
+ 

pulseaudio/0003-no-root-warn.diff

@@ -0,0 +1,14 @@
+--- ./src/daemon/main.c.orig	2015-10-30 07:16:48.000000000 -0500
++++ ./src/daemon/main.c	2016-01-07 15:05:42.131126245 -0600
+@@ -647,10 +647,8 @@
+     }
+ 
+ #ifdef HAVE_GETUID
+-    if (getuid() == 0 && !conf->system_instance)
+-        pa_log_warn(_("This program is not intended to be run as root (unless --system is specified)."));
+ #ifndef HAVE_DBUS /* A similar, only a notice worthy check was done earlier, if D-Bus is enabled. */
+-    else if (getuid() != 0 && conf->system_instance) {
++    if (getuid() != 0 && conf->system_instance) {
+         pa_log(_("Root privileges required."));
+         goto finish;
+     }

pulseaudio/030_posix-completion.diff

@@ -0,0 +1,91 @@
+--- ./shell-completion/bash/pactl.orig	2022-05-28 10:18:37.000000000 -0500
++++ ./shell-completion/bash/pactl	2022-06-02 13:55:52.301595146 -0500
+@@ -1,39 +1,45 @@
+ #!/bin/bash
+ 
+ __cards () {
++    (pactl list cards short 2> /dev/null) |\
+     while IFS=$'\t' read idx name _; do
+         printf "%s %s\n" "$idx" "$name"
+-    done < <(pactl list cards short 2> /dev/null)
++    done
+ }
+ 
+ __sinks () {
++    (pactl list sinks short 2> /dev/null) |\
+     while IFS=$'\t' read _ name _ _ _; do
+         printf "%s\n" "$name"
+-    done < <(pactl list sinks short 2> /dev/null)
++    done
+ }
+ 
+ __sinks_idx () {
++    (pactl list sinks short 2> /dev/null) |\
+     while IFS=$'\t' read idx _ _ _ _; do
+         printf "%s\n" "$idx"
+-    done < <(pactl list sinks short 2> /dev/null)
++    done
+ }
+ 
+ __sources () {
++    (pactl list sources short 2> /dev/null) |\
+     while IFS=$'\t' read _ name _ _ _; do
+         printf "%s\n" "$name"
+-    done < <(pactl list sources short 2> /dev/null)
++    done
+ }
+ 
+ __sink_inputs () {
++    (pactl list sink-inputs short 2> /dev/null) |\
+     while IFS=$'\t' read idx _ _ _ _; do
+         printf "%s\n" "$idx"
+-    done < <(pactl list sink-inputs short 2> /dev/null)
++    done
+ }
+ 
+ __source_outputs () {
++    (pactl list source-outputs short 2> /dev/null) |\
+     while IFS=$'\t' read idx _ _ _ _; do
+         printf "%s\n" "$idx"
+-    done < <(pactl list source-outputs short 2> /dev/null)
++    done
+ }
+ 
+ __ports () {
+@@ -77,28 +83,32 @@
+ }
+ 
+ __all_modules () {
++    (pulseaudio --dump-modules 2> /dev/null) |\
+     while read name; do
+         name=${name%% *}
+         printf "%s\n" "$name"
+-    done < <(pulseaudio --dump-modules 2> /dev/null)
++    done
+ }
+ 
+ __loaded_modules () {
++    (pactl list modules short 2> /dev/null) |\
+     while IFS=$'\t' read idx name _; do
+         printf "%s %s\n" "$idx" "$name"
+-    done < <(pactl list modules short 2> /dev/null)
++    done
+ }
+ 
+ __resample_methods () {
++    (pulseaudio --dump-resample-methods 2> /dev/null) |\
+     while read name; do
+         printf "%s\n" "$name"
+-    done < <(pulseaudio --dump-resample-methods 2> /dev/null)
++    done
+ }
+ 
+ _pacat_file_formats () {
++    (pacat --list-file-formats 2> /dev/null) |\
+     while IFS=$'\t' read name _; do
+         printf "%s\n" "$name"
+-    done < <(pacat --list-file-formats 2> /dev/null)
++    done
+ }
+ 
+ in_array() {

pulseaudio/doinst.sh

@@ -0,0 +1,44 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+config etc/pulse/client.conf.new
+config etc/pulse/daemon.conf.new
+config etc/pulse/default.pa.new
+config etc/pulse/system.pa.new
+config etc/xdg/autostart/pulseaudio.desktop.new
+preserve_perms etc/rc.d/rc.pulseaudio.new
+
+# Make sure the pulse user is in the audio group:
+chroot . /usr/sbin/usermod -a -G audio pulse 1> /dev/null 2> /dev/null
+
+# Make sure the root user is in the audio group:
+chroot . /usr/sbin/usermod -a -G audio root 1> /dev/null 2> /dev/null
+
+# Recompile glib schemas:
+if [ -e usr/share/glib-2.0/schemas ]; then
+  if [ -x /usr/bin/glib-compile-schemas ]; then
+    /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas >/dev/null 2>&1
+  fi
+fi
+

pulseaudio/ed3d4f0837f670e5e5afb1afa5bcfc8ff05d3407.patch

@@ -0,0 +1,64 @@
+From ed3d4f0837f670e5e5afb1afa5bcfc8ff05d3407 Mon Sep 17 00:00:00 2001
+From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
+Date: Fri, 1 Dec 2023 13:28:05 +0300
+Subject: [PATCH] alsa-ucm: Replace port device UCM context assertion with an
+ error
+
+The pa_alsa_ucm_set_port() function is passed both a mapping context and
+a device port, and both of these refer to their respective UCM device.
+While switching over to having one port per mapping per UCM device, I
+expected both of these to be the same device struct, so added an assert
+checking so.
+
+This assertion gets triggered when we have multiple UCM verbs declaring
+the same UCM device name. The root cause here is that the ports' UCM
+device references are set once while creating the ports for the card, so
+they happen to be those of a specific verb and may not match those from
+a different UCM verb's profiles' mappings.
+
+Solving the root cause necessitates a larger refactor. What we actually
+assume here is that name of the UCM device is same for both the port and
+the UCM context, which ends up always true in practice. For now, replace
+the assert with a check and error.
+
+Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
+Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/802>
+---
+ src/modules/alsa/alsa-ucm.c | 14 ++++++++++++--
+ 1 file changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/src/modules/alsa/alsa-ucm.c b/src/modules/alsa/alsa-ucm.c
+index 7f5136249..018c01739 100644
+--- a/src/modules/alsa/alsa-ucm.c
++++ b/src/modules/alsa/alsa-ucm.c
+@@ -1581,6 +1581,7 @@ int pa_alsa_ucm_set_port(pa_alsa_ucm_mapping_context *context, pa_device_port *p
+     pa_alsa_ucm_config *ucm;
+     pa_alsa_ucm_device *dev;
+     pa_alsa_ucm_port_data *data;
++    const char *dev_name, *ucm_dev_name;
+ 
+     pa_assert(context && context->ucm);
+ 
+@@ -1588,8 +1589,17 @@ int pa_alsa_ucm_set_port(pa_alsa_ucm_mapping_context *context, pa_device_port *p
+     pa_assert(ucm->ucm_mgr);
+ 
+     data = PA_DEVICE_PORT_DATA(port);
+-    dev = context->ucm_device;
+-    pa_assert(dev == data->device);
++    dev = data->device;
++    pa_assert(dev);
++
++    if (context->ucm_device) {
++        dev_name = pa_proplist_gets(dev->proplist, PA_ALSA_PROP_UCM_NAME);
++        ucm_dev_name = pa_proplist_gets(context->ucm_device->proplist, PA_ALSA_PROP_UCM_NAME);
++        if (!pa_streq(dev_name, ucm_dev_name)) {
++            pa_log_error("Failed to set port %s with wrong UCM context: %s", dev_name, ucm_dev_name);
++            return -1;
++        }
++    }
+ 
+     return ucm_device_enable(ucm, dev);
+ }
+-- 
+GitLab
+

pulseaudio/f5cacd94abcc47003bd88ad7ca1450de649ffb15.patch

@@ -0,0 +1,95 @@
+From f5cacd94abcc47003bd88ad7ca1450de649ffb15 Mon Sep 17 00:00:00 2001
+From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
+Date: Thu, 30 Nov 2023 20:17:22 +0300
+Subject: [PATCH] alsa-ucm: Check UCM verb before working with device status
+
+Some versions of the ALSA libraries run into a segmentation fault when
+we query a UCM device/modifier status without first setting a UCM verb.
+It's not a reasonable thing to do anyway, so check for this case and
+return an error. Also do the check in other helpers.
+
+Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
+Part-of: <https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/801>
+---
+ src/modules/alsa/alsa-ucm.c | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+diff --git a/src/modules/alsa/alsa-ucm.c b/src/modules/alsa/alsa-ucm.c
+index bb9438f79..7f5136249 100644
+--- a/src/modules/alsa/alsa-ucm.c
++++ b/src/modules/alsa/alsa-ucm.c
+@@ -624,6 +624,11 @@ static long ucm_device_status(pa_alsa_ucm_config *ucm, pa_alsa_ucm_device *dev)
+     char *devstatus;
+     long status = 0;
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to get status for UCM device %s: no UCM verb set", dev_name);
++        return -1;
++    }
++
+     devstatus = pa_sprintf_malloc("_devstatus/%s", dev_name);
+     if (snd_use_case_geti(ucm->ucm_mgr, devstatus, &status) < 0) {
+         pa_log_debug("Failed to get status for UCM device %s", dev_name);
+@@ -637,6 +642,11 @@ static long ucm_device_status(pa_alsa_ucm_config *ucm, pa_alsa_ucm_device *dev)
+ static int ucm_device_disable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_device *dev) {
+     const char *dev_name = pa_proplist_gets(dev->proplist, PA_ALSA_PROP_UCM_NAME);
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to disable UCM device %s: no UCM verb set", dev_name);
++        return -1;
++    }
++
+     /* If any of dev's conflicting devices is enabled, trying to disable
+      * dev gives an error despite the fact that it's already disabled.
+      * Check that dev is enabled to avoid this error. */
+@@ -657,6 +667,11 @@ static int ucm_device_disable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_device *dev)
+ static int ucm_device_enable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_device *dev) {
+     const char *dev_name = pa_proplist_gets(dev->proplist, PA_ALSA_PROP_UCM_NAME);
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to enable UCM device %s: no UCM verb set", dev_name);
++        return -1;
++    }
++
+     /* We don't need to enable devices that are already enabled */
+     if (ucm_device_status(ucm, dev) > 0) {
+         pa_log_debug("UCM device %s is already enabled", dev_name);
+@@ -707,6 +722,11 @@ static long ucm_modifier_status(pa_alsa_ucm_config *ucm, pa_alsa_ucm_modifier *m
+     char *modstatus;
+     long status = 0;
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to get status for UCM modifier %s: no UCM verb set", mod_name);
++        return -1;
++    }
++
+     modstatus = pa_sprintf_malloc("_modstatus/%s", mod_name);
+     if (snd_use_case_geti(ucm->ucm_mgr, modstatus, &status) < 0) {
+         pa_log_debug("Failed to get status for UCM modifier %s", mod_name);
+@@ -720,6 +740,11 @@ static long ucm_modifier_status(pa_alsa_ucm_config *ucm, pa_alsa_ucm_modifier *m
+ static int ucm_modifier_disable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_modifier *mod) {
+     const char *mod_name = pa_proplist_gets(mod->proplist, PA_ALSA_PROP_UCM_NAME);
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to disable UCM modifier %s: no UCM verb set", mod_name);
++        return -1;
++    }
++
+     /* We don't need to disable modifiers that are already disabled */
+     if (ucm_modifier_status(ucm, mod) == 0) {
+         pa_log_debug("UCM modifier %s is already disabled", mod_name);
+@@ -738,6 +763,11 @@ static int ucm_modifier_disable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_modifier *m
+ static int ucm_modifier_enable(pa_alsa_ucm_config *ucm, pa_alsa_ucm_modifier *mod) {
+     const char *mod_name = pa_proplist_gets(mod->proplist, PA_ALSA_PROP_UCM_NAME);
+ 
++    if (!ucm->active_verb) {
++        pa_log_error("Failed to disable UCM modifier %s: no UCM verb set", mod_name);
++        return -1;
++    }
++
+     /* We don't need to enable modifiers that are already enabled */
+     if (ucm_modifier_status(ucm, mod) > 0) {
+         pa_log_debug("UCM modifier %s is already enabled", mod_name);
+-- 
+GitLab
+

pulseaudio/pulseaudio-autostart-meson.build.patch

@@ -0,0 +1,10 @@
+--- ./src/daemon/meson.build.orig	2021-07-27 15:02:27.738868200 -0500
++++ ./src/daemon/meson.build	2021-08-09 13:15:24.344941127 -0500
+@@ -38,6 +38,7 @@
+ if x11_dep.found()
+   conf = configuration_data()
+   conf.set('PACTL_BINARY', join_paths(bindir, 'pactl'))
++  conf.set('PA_BINARY', join_paths(bindir, 'pulseaudio'))
+ 
+   configure_file(
+     input : 'start-pulseaudio-x11.in',

pulseaudio/pulseaudio-autostart.patch

@@ -0,0 +1,13 @@
+diff -up pulseaudio-6.0/src/daemon/start-pulseaudio-x11.in.autostart pulseaudio-6.0/src/daemon/start-pulseaudio-x11.in
+--- pulseaudio-6.0/src/daemon/start-pulseaudio-x11.in.autostart	2015-02-12 08:10:35.000000000 -0600
++++ pulseaudio-6.0/src/daemon/start-pulseaudio-x11.in	2015-06-22 11:24:13.561614127 -0500
+@@ -17,6 +17,9 @@
+ 
+ set -e
+ 
++# probe to test if autospawn works, else resort to starting manually
++@PACTL_BINARY@ info > /dev/null 2>&1 || @PA_BINARY@ --start "$@"
++
+ if [ x"$DISPLAY" != x ] ; then
+ 
+     @PACTL_BINARY@ load-module module-x11-publish "display=$DISPLAY" > /dev/null

pulseaudio/pulseaudio.SlackBuild

@@ -0,0 +1,164 @@
+#!/bin/bash
+
+# Slackware build script for pulseaudio
+
+# Copyright 2015  Christoph Willing  Brisbane, Australia
+# Copyright 2016, 2018, 2020, 2024  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=pulseaudio
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-4}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+cat $CWD/030_posix-completion.diff | patch -p0 --verbose || exit 1
+
+# https://bugzilla.redhat.com/show_bug.cgi?id=1234710
+cat $CWD/0001-client-conf-Add-allow-autospawn-for-root.patch | patch -p1 --verbose || exit 1
+cat $CWD/0002-allow-autospawn-for-root-default.diff | patch -p1 --verbose || exit 1
+
+# Do not log a warning every time root uses PulseAudio:
+cat $CWD/0003-no-root-warn.diff | patch -p1 --verbose || exit 1
+
+sed -i -e '/@PA_BINARY@/ imkdir -p \$HOME/.config/pulse' src/daemon/start-pulseaudio-x11.in
+echo "X-MATE-Autostart-Phase=Initialization" >> src/daemon/pulseaudio.desktop.in
+
+# If autospawn isn't working, start-pulseaudio-x11 should start it manually:
+cat $CWD/pulseaudio-autostart.patch | patch -p1 --verbose || exit 1
+# When built by meson, this patch also required to fix the above issue:
+cat $CWD/pulseaudio-autostart-meson.build.patch | patch -p1 --verbose || exit 1
+
+# Fix 17.0 regressions:
+cat $CWD/ed3d4f0837f670e5e5afb1afa5bcfc8ff05d3407.patch | patch -p1 --verbose || exit 1
+cat $CWD/f5cacd94abcc47003bd88ad7ca1450de649ffb15.patch | patch -p1 --verbose || exit 1
+
+# Configure, build, and install:
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+meson setup \
+  --prefix=/usr \
+  --libdir=lib${LIBDIRSUFFIX} \
+  --libexecdir=/usr/libexec \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --includedir=/usr/include \
+  --datadir=/usr/share \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --buildtype=release \
+  -Dorc=enabled \
+  -Dgsettings=enabled \
+  -Dhal-compat=false \
+  -Dsystem_user="pulse" \
+  -Dsystem_group="pulse" \
+  -Daccess_group="audio" \
+  -Dbashcompletiondir="/usr/share/bash-completion/completions" \
+  .. || exit 1
+  "${NINJA:=ninja}" $NUMJOBS || exit 1
+  DESTDIR=$PKG $NINJA install || exit 1
+cd ..
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Move dbus configs to system location:
+mkdir -p $PKG/usr/share/dbus-1/system.d/
+mv $PKG/etc/dbus-1/system.d/* $PKG/usr/share/dbus-1/system.d/
+rmdir --parents $PKG/etc/dbus-1/system.d/
+
+# Move config files to .new:
+for f in $( find $PKG/etc/pulse/ -type f ) ; do mv $f $f.new ; done
+mv $PKG/etc/xdg/autostart/pulseaudio.desktop $PKG/etc/xdg/autostart/pulseaudio.desktop.new
+
+# Add an init script for system wide mode.  You shouldn't use this, but we'll
+# still let you if you really want.
+mkdir -p $PKG/etc/rc.d
+cp $CWD/rc.pulseaudio $PKG/etc/rc.d/rc.pulseaudio.new
+chmod 644 $PKG/etc/rc.d/rc.pulseaudio.new
+chown root:root $PKG/etc/rc.d/rc.pulseaudio.new
+
+# Compress and link manpages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# Install documentation:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  COPYING* *GPL LICENSE README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

pulseaudio/pulseaudio.url

@@ -0,0 +1 @@
+http://freedesktop.org/software/pulseaudio/releases/

pulseaudio/rc.pulseaudio

@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Start/stop/restart PulseAudio in system mode.
+# In this mode, a single system instance of PulseAudio will be shared by
+# multiple local users.
+#
+# Please note:  this is not generally the best way to use PulseAudio!
+# Normally pulseaudio will start automatically as-needed with an instance
+# per audio user.  Unless you really need to use system mode you should leave
+# this script non-executable.
+#
+# For more information, see:
+# http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/SystemWide
+
+pulse_start() {
+  if [ -x /usr/bin/pulseaudio ]; then
+    echo "Starting system PulseAudio daemon:  /usr/bin/pulseaudio --system --disallow-module-loading &"
+    rm -rf /var/lib/pulse
+    # Any errors/warnings will go to the log files:
+    /usr/bin/pulseaudio --system --disallow-module-loading 1> /dev/null 2> /dev/null &
+  fi
+}
+
+pulse_stop() {
+  echo "Stopping PulseAudio:  /bin/killall pulseaudio"
+  /bin/killall pulseaudio 2> /dev/null
+}
+
+pulse_restart() {
+  pulse_stop
+  sleep 1
+  pulse_start
+}
+
+case "$1" in
+'start')
+ pulse_start
+  ;;
+'stop')
+  pulse_stop
+  ;;
+'restart')
+ pulse_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
+

pulseaudio/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+pulseaudio: pulseaudio (PulseAudio sound server)
+pulseaudio:
+pulseaudio: Pulseaudio is a networked low-latency sound server intended to be an
+pulseaudio: improved replacement for the Enlightened Sound Daemon (EsounD).
+pulseaudio:
+pulseaudio: Homepage: http://www.pulseaudio.org
+pulseaudio:
+pulseaudio:
+pulseaudio:
+pulseaudio:
+pulseaudio:

runc/runc.SlackBuild

@@ -26,8 +26,8 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=runc
-VERSION=${VERSION:-1.1.10}
+VERSION=${VERSION:-1.1.12}
-PRGVER=${PRGVER:-1.1.10}
+PRGVER=${PRGVER:-1.1.12}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_EXs}
 

runc/runc.info

@@ -1,10 +1,10 @@
 PRGNAM="runc"
-VERSION="1.1.10"
+VERSION="1.1.12"
 HOMEPAGE="https://github.com/opencontainers/runc"
 DOWNLOAD="UNSUPPORTED"
 MD5SUM=""
-DOWNLOAD_x86_64="https://github.com/opencontainers/runc/archive/v1.1.10/runc-1.1.10.tar.gz"
+DOWNLOAD_x86_64="https://github.com/opencontainers/runc/archive/v1.1.12/runc-1.1.12.tar.gz"
-MD5SUM_x86_64="1a3c4081ad29cfaf8544edc70be81e0c"
+MD5SUM_x86_64="e77fb3f6d3070da60f58688bde3e7583"
 BUILDREQUIRES="google-go-lang libseccomp"
 REQUIRES="libseccomp"
 MAINTAINER="Sergei Fedosoff"

speex/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+speex: speex (low-bitrate voice audio codec)
+speex:
+speex: Speex is a patent-free, Open Source/Free Software voice codec. Unlike
+speex: other codecs like MP3 and Ogg Vorbis, Speex is designed to compress
+speex: voice at bitrates in the 2-45 kbps range. Possible applications
+speex: include VoIP, internet audio streaming, archiving of speech data
+speex: (e.g. voice mail), and audio books. It is meant to be complementary
+speex: to the Ogg Vorbis codec.
+speex:
+speex: Homepage: https://www.speex.org/
+speex:

speex/speex.SlackBuild

@@ -0,0 +1,157 @@
+#!/bin/bash
+
+# Copyright 2017, 2018, 2022  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=speex
+SRCNAM=speex-Speex
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | rev | cut -f 3- -d -)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | grep -E -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$(echo $VERSION | tr '-' '_')-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1
+cd $SRCNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --docdir=/usr/doc/${PKGNAM}-$VERSION \
+  --disable-static \
+  --enable-binaries \
+  --build=$ARCH-slackware-linux || exit 1
+
+# Build and install:
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS COPYING* ChangeLog NEWS* README* TODO \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1 | grep -v '\.gz$') ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$(echo $VERSION | tr '-' '_')-$ARCH-$BUILD.txz
+

speex/speex.url

@@ -0,0 +1 @@
+https://github.com/xiph/speex

speexdsp/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+speexdsp: speexdsp (DSP library)
+speexdsp:
+speexdsp: SpeexDSP is a patent-free, Open Source/Free Software DSP library.
+speexdsp:
+speexdsp: Homepage: http://www.speex.org/
+speexdsp:
+speexdsp:
+speexdsp:
+speexdsp:
+speexdsp:
+speexdsp:

speexdsp/speexdsp.SlackBuild

@@ -0,0 +1,119 @@
+#!/bin/bash
+
+# Copyright 2015, 2018, 2019, 2022  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=speexdsp
+SRCNAM=speexdsp-SpeexDSP
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1
+cd $SRCNAM-$VERSION || exit 1
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \+ -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \+
+
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --enable-static=no \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+cp -a \
+  COPYING* README* TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz

speexdsp/speexdsp.url

@@ -0,0 +1 @@
+https://github.com/xiph/speexdsp