diff --git a/alsa-utils/alsa-utils.SlackBuild b/alsa-utils/alsa-utils.SlackBuild
new file mode 100755
index 0000000..5e31ca6
--- /dev/null
+++ b/alsa-utils/alsa-utils.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2015, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=alsa-utils
+VERSION=${VERSION:-$(echo alsa-utils-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-alsa-utils
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf alsa-utils-$VERSION
+tar xvf $CWD/alsa-utils-$VERSION.tar.?z || exit 1
+cd alsa-utils-$VERSION || exit 1
+
+# Better off just disabling alsaconf...
+#zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --disable-alsaconf \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.alsa > $PKG/etc/rc.d/rc.alsa.new
+chmod 0644 $PKG/etc/rc.d/rc.alsa.new
+cat $CWD/rc.alsa-oss > $PKG/etc/rc.d/rc.alsa-oss.new
+chmod 0644 $PKG/etc/rc.d/rc.alsa-oss.new
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/alsa-utils-$VERSION
+cp -a \
+  COPYING INSTALL TODO \
+  seq/aconnect/README.aconnect \
+  seq/aseqnet/README.aseqnet \
+  $PKG/usr/doc/alsa-utils-$VERSION
+cp -a alsamixer/README $PKG/usr/doc/alsa-utils-$VERSION/README.alsamixer
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/alsa-utils-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/alsa-utils/alsa-utils.alsaconf.diff b/alsa-utils/alsa-utils.alsaconf.diff
new file mode 100644
index 0000000..43aab43
--- /dev/null
+++ b/alsa-utils/alsa-utils.alsaconf.diff
@@ -0,0 +1,59 @@
+--- ./alsaconf/alsaconf.in.orig	2010-04-16 06:11:06.000000000 -0500
++++ ./alsaconf/alsaconf.in	2010-05-29 21:08:39.000000000 -0500
+@@ -50,7 +50,9 @@
+ }
+ 
+ # Check for GNU/Linux distributions
+-if [ -f /etc/SuSE-release ]; then
++if [ -f /etc/slackware-version ]; then
++  distribution="slackware"
++elif [ -f /etc/SuSE-release ]; then
+   distribution="suse"
+   suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//)
+ elif [ -f /etc/UnitedLinux-release ]; then
+@@ -302,10 +304,12 @@
+ else
+ if [ "$distribution" = "gentoo" ]; then
+   cfgfile="/etc/modules.d/alsa"
++elif [ "$distribution" = "slackware" ]; then
++  cfgfile="/etc/modprobe.d/sound.conf"
+ elif [ "$kernel" = "new" ]; then
+   cfgfile="/etc/modprobe.conf"
+   if [ -d /etc/modprobe.d ]; then
+-    cfgout="/etc/modprobe.d/50-sound.conf"
++    cfgout="/etc/modprobe.d/sound.conf"
+     cfgoldout="/etc/modprobe.d/sound"
+     if [ ! -f $cfgout ]; then
+ 	modver=$(modprobe -V | sed -e's/^module-init-tools version //')
+--- ./alsaconf/alsaconf.8.orig	2010-04-16 06:11:06.000000000 -0500
++++ ./alsaconf/alsaconf.8	2010-05-29 21:07:51.000000000 -0500
+@@ -16,8 +16,6 @@
+ This manual page documents briefly the
+ .B alsaconf
+ command.
+-This manual page was written for the Debian distribution because the
+-original program does not have a manual page.
+ .PP
+ \fBAlsaconf\fP is a simple shell script which tries to detect the sound cards
+ on your system and writes a suitable configuration file for ALSA. It will try
+@@ -74,13 +72,6 @@
+ Set the uid for the ALSA devices (default = 0).
+ This option is obsolete in the recent ALSA version.
+ 
+-.SH DEBIAN SPECIFIC
+-In Debian, the default gid of the device files is 29 (corresponding to the
+-audio group) and the default device mode is 0660.
+-
+-For the ALSA base package, see also
+-.I /usr/share/doc/alsa\-base/
+-
+ .SH SEE ALSO
+ \fB
+ alsamixer(1),
+@@ -98,5 +89,4 @@
+ Bernd Kaindl <bk@suse.de> and
+ Jan Ondrej (SAL) <ondrejj@salstar.sk>
+ 
+-This manual page was written by Jordi Mallach <jordi@debian.org>,
+-for the Debian system (but may be used by others).
++This manual page was written by Jordi Mallach <jordi@debian.org>.
diff --git a/alsa-utils/alsa-utils.url b/alsa-utils/alsa-utils.url
new file mode 100644
index 0000000..1d4f43a
--- /dev/null
+++ b/alsa-utils/alsa-utils.url
@@ -0,0 +1 @@
+ftp://ftp.alsa-project.org/pub
diff --git a/alsa-utils/doinst.sh b/alsa-utils/doinst.sh
new file mode 100644
index 0000000..8a9b287
--- /dev/null
+++ b/alsa-utils/doinst.sh
@@ -0,0 +1,27 @@
+if [ -r etc/asound.state -a ! -r var/lib/alsa/asound.state -a ! -L etc/asound.state ]; then
+  mv etc/asound.state var/lib/alsa
+fi
+# Better a dangling symlink than for nobody to know where this went:
+rm -f etc/asound.state
+( cd etc && ln -sf ../var/lib/alsa/asound.state . )
+
+# Duplicate permissions from any existing rc scripts:
+if [ -e etc/rc.d/rc.alsa ]; then
+  if [ -x etc/rc.d/rc.alsa ]; then
+    chmod 755 etc/rc.d/rc.alsa.new
+  else
+    chmod 644 etc/rc.d/rc.alsa.new
+  fi
+fi
+if [ -e etc/rc.d/rc.alsa-oss ]; then
+  if [ -x etc/rc.d/rc.alsa-oss ]; then
+    chmod 755 etc/rc.d/rc.alsa-oss.new
+  else
+    chmod 644 etc/rc.d/rc.alsa-oss.new
+  fi
+fi
+
+# Move the scripts into place:
+mv etc/rc.d/rc.alsa.new etc/rc.d/rc.alsa
+mv etc/rc.d/rc.alsa-oss.new etc/rc.d/rc.alsa-oss
+
diff --git a/alsa-utils/rc.alsa b/alsa-utils/rc.alsa
new file mode 100644
index 0000000..077966d
--- /dev/null
+++ b/alsa-utils/rc.alsa
@@ -0,0 +1,87 @@
+#!/bin/sh
+# Load the mixer settings and OSS compatibility (if enabled) for ALSA.
+# (the Advanced Linux Sound Architecture)
+
+# A function to load the ALSA mixer settings:
+load_alsa_mixer() {
+  if [ -r /var/lib/alsa/asound.state ]; then
+    echo "Loading ALSA mixer settings:  /usr/sbin/alsactl restore"
+    /usr/sbin/alsactl restore
+  else
+    # It's possible a user might not want to set a default sound state.
+    # In that case, do this:  touch /var/lib/alsa/no.asound.state
+    if [ ! -r /var/lib/alsa/no.asound.state ]; then
+      echo "Setting default ALSA mixer settings."
+      # set default mixer volumes for ALSA
+      # Taken from the alsaconf script.
+      amixer -s -q <<EOF
+set Master 75% unmute
+set Master -12dB
+set 'Master Mono' 75% unmute
+set 'Master Mono' -12dB
+set Front 75% unmute
+set Front -12dB
+set PCM 90% unmute
+set PCM 0dB
+mixer Synth 90% unmute
+mixer Synth 0dB
+mixer CD 90% unmute
+mixer CD 0dB
+# mute mic
+set Mic 0% mute
+# ESS 1969 chipset has 2 PCM channels
+set PCM,1 90% unmute
+set PCM,1 0dB
+# Trident/YMFPCI/emu10k1
+set Wave 100% unmute
+set Music 100% unmute
+set AC97 100% unmute
+# CS4237B chipset:
+set 'Master Digital' 75% unmute
+# Envy24 chips with analog outs
+set DAC 90% unmute
+set DAC -12dB
+set DAC,0 90% unmute
+set DAC,0 -12dB
+set DAC,1 90% unmute
+set DAC,1 -12dB
+# some notebooks use headphone instead of master
+set Headphone 75% unmute
+set Headphone -12dB
+set Playback 100% unmute
+# turn off digital switches
+set "SB Live Analog/Digital Output Jack" off
+set "Audigy Analog/Digital Output Jack" off
+EOF
+      echo "Storing default ALSA mixer settings:  /usr/sbin/alsactl store"
+      /usr/sbin/alsactl store
+    fi
+  fi
+}
+
+# If udev or something else has loaded the ALSA modules, then
+# simply load the mixer settings and make sure the OSS compat
+# modules are loaded (if enabled):
+if [ -d /proc/asound ]; then
+  if [ -x /etc/rc.d/rc.alsa-oss ]; then
+    sh /etc/rc.d/rc.alsa-oss
+  fi
+  load_alsa_mixer
+else
+  # If there are ALSA modules defined in /etc/modprobe.d/*, but
+  # ALSA is not yet loaded, then load the modules now:
+  DRIVERS=$(modprobe -c | grep -E "^[[:space:]]*alias[[:space:]]+snd-card-[[:digit:]]" | tr -s "[[:blank:]]" " " | cut -d " " -f 3)
+  if [ ! "$DRIVERS" = "" ]; then
+    echo "Loading ALSA kernel modules."
+    for module in $DRIVERS; do
+      modprobe $module
+    done
+  fi
+  # If ALSA is now up, then load the mixer settings and OSS modules (if enabled):
+  if [ -d /proc/asound ]; then
+    if [ -x /etc/rc.d/rc.alsa-oss ]; then
+      sh /etc/rc.d/rc.alsa-oss
+    fi
+    load_alsa_mixer
+  fi
+fi
diff --git a/alsa-utils/rc.alsa-oss b/alsa-utils/rc.alsa-oss
new file mode 100644
index 0000000..cc27b76
--- /dev/null
+++ b/alsa-utils/rc.alsa-oss
@@ -0,0 +1,24 @@
+#!/bin/sh
+# Load the ALSA OSS kernel modules to support OSS applications.
+# To use this, set this script as executable (chmod 755 rc.alsa-oss)
+# and it will be run from the main rc.alsa script.  Unless you know
+# that something requires OSS support, it is better to leave this
+# script disabled.  Some applications will try OSS first even though
+# they also support ALSA, and will block other applications from
+# using audio I/O.
+#
+# Many programs that use OSS can be run using the aoss wrapper and
+# will then use ALSA in a non-blocking way (and will not require
+# loading these kernel modules).  Consider trying that before enabling
+# these modules.  (See "man aoss")
+
+if modprobe -c | tr _ - | grep -wq snd-pcm-oss ; then
+  if ! cat /proc/modules | tr _ - | grep -wq snd-pcm-oss ; then
+    echo "Loading OSS compatibility modules for ALSA."
+    # Use -b to enable blacklisting these modules:
+    modprobe -q -b snd-pcm-oss
+    modprobe -q -b snd-seq-oss
+    modprobe -q -b snd-mixer-oss
+  fi
+fi
+
diff --git a/alsa-utils/slack-desc b/alsa-utils/slack-desc
new file mode 100644
index 0000000..39d6b20
--- /dev/null
+++ b/alsa-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) 
+alsa-utils:
+alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+alsa-utils: functionality to the Linux operating system. This package contains
+alsa-utils: command line audio utilities for use with ALSA:
+alsa-utils:  alsactl        (manage soundcard settings)
+alsa-utils:  arecord/aplay  (capture and play audio)
+alsa-utils:  amixer         (adjust mixer settings from the command line)
+alsa-utils:  alsamixer      (an ncurses-based console mixer)
+alsa-utils:
+alsa-utils: For more information, see http://alsa-project.org