Initial commit

hamlib/README

@@ -0,0 +1,46 @@
+Hamlib (the ham radio control libraries)
+
+Hamlib is a development effort to provide a consistent C language
+interface for programmers wanting to incorporate radio controls in their
+programs.  Network daemons for radio and rotator control, along with
+language bindings for C++, Perl, Python, TCL, and Lua are included.
+
+Optional language bindings
+
+To build either or all of the Perl, Python, or TCL bindings, pass one of
+or in combination:
+
+        PL_MOD=yes
+        PY_MOD=yes
+        TCL_MOD=yes
+
+to the build script.
+
+Optional Lua binding
+
+Also available are bindings for Lua 5.2 or later.  As Lua 5.2 and Lua
+5.3 are now available from SlackBuilds.org, once the preferred version
+of Lua is installed, the Lua bindings may be built by passing:
+
+           LUA_VER=5.2
+           LUA_VER=5.3
+
+to the build script.
+
+Optional Python3 binding (experimental)
+
+For those wishing to experiment with Python3 and Hamlib, bindings may be
+built (exclusive of the normal Python2 bindings) by passing:
+
+           PY3_MOD=yes
+
+to the build script.  This option overrides PY_MOD.
+
+While Python allows for version 2 and 3 modules to be installed
+concurrently, and while there does exist a method for doing so with
+Hamlib, that has not been included in this build script at this time.
+If concurrent installation is needed, please contact the build script
+maintainer.
+
+All four bindings (either of the Python and either of the Lua versions)
+may be passed to the script to enable all bindings at build time.

hamlib/doinst.sh

@@ -0,0 +1,6 @@
+if [ -x /usr/bin/install-info -a -d usr/info ]; then
+  ( cd usr/info
+    rm -f dir
+    for i in *.info*; do /usr/bin/install-info $i dir 2>/dev/null; done
+  )
+fi

hamlib/hamlib.SlackBuild

@@ -0,0 +1,191 @@
+#!/bin/bash
+
+# SlackBuild script for Hamlib
+
+# Copyright 2010 Howard Pepper <h_pepper {at} bellsouth [dot] net>
+# Copyright 2017,2018 Nate Bargmann <n0nb@arrl.net>
+# Copyright 2020 JK Wood <joshuakwood@gmail.com>
+# Copyright 2023 Sergei Fedosoff <eleksir@gmail.com>
+#
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# 20230630 bkw: Modified by SlackBuilds.org, BUILD=2:
+# - add doinst.sh to handle /usr/info/dir.
+# - rm INSTALL (compile instructions only).
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=hamlib
+VERSION=${VERSION:-4.5.5}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_EXs}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/EXs}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+DOCFILES="AUTHORS COPYING COPYING.LIB ChangeLog LICENSE NEWS PLAN
+          README README.betatester README.developer THANKS"
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC -mfpmath=sse -msse -msse2 -msse3 -msse4 -msse4.1 -msse4.2 -mavx -mavx2"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} + -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} +
+
+if [ x"${PL_MOD}" = x"yes" ]; then
+  PERL_BINDING="--with-perl-binding"
+else
+  PERL_BINDING=""
+fi
+
+if { [ x"${PY_MOD}" = x"yes" ] || [ x"${PY3_MOD}" = x"yes" ]; } then
+  PYTHON_BINDING="--with-python-binding"
+  PYV=`python -c "import sys;t='{v[0]}.{v[1]}'.format(v=list(sys.version_info[:2]));sys.stdout.write(t)";`
+else
+  PYTHON_BINDING=""
+fi
+
+if [ x"${PY3_MOD}" = x"yes" ]; then
+  export PYTHON=`which python3`
+  PYV=`python3 -c "import sys;t='{v[0]}.{v[1]}'.format(v=list(sys.version_info[:2]));sys.stdout.write(t)";`
+fi
+
+if [ x"${TCL_MOD}" = x"yes" ]; then
+  TCL_BINDING="--with-tcl-binding"
+  TCLV=`echo 'puts $tcl_version;exit 0' | tclsh`
+else
+  TCL_BINDING=""
+fi
+
+# Only if Lua >= 5.2 installed
+if { [ x"${LUA_VER}" = x"5.2" ] || [ x"${LUA_VER}" = x"5.3" ]; } then
+  LUA_BINDING="--with-lua-binding"
+  export LUA_INCLUDE="-I/usr/include/lua${LUA_VER}"
+  export LUA="/usr/bin/lua${LUA_VER}"
+else
+  LUA_BINDING=""
+fi
+
+CFLAGS="$SLKCFLAGS -rdynamic" \
+CXXFLAGS="$SLKCFLAGS -rdynamic" \
+LDFLAGS="-rdynamic -Wl,--export-dynamic -Wl,-E -Wl,--no-as-needed -Wl,-O2" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --infodir=/usr/info \
+  --disable-static \
+  --disable-html-matrix \
+  $PERL_BINDING \
+  $PYTHON_BINDING \
+  $TCL_BINDING \
+  $LUA_BINDING
+
+# Fix linking when --libdir=/usr/lib64
+sed -i \
+  -e '/RANLIB/s:$(libdir)/\(.*LIBNAME)\):$(libdir)/`basename \1`:g' \
+  src/Makefile
+
+make -j$(nproc)
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+if [ x"${PL_MOD}" = x"yes" ]; then
+  find $PKG -name perllocal.pod \
+  -o -name ".packlist" \
+  -o -name "*.bs" \
+  | xargs rm -f
+fi
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/
+cp -a $DOCFILES $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+if [ x"${PY_MOD}" = x"yes" ]; then
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/python${PYV}/site-packages/_Hamlib.la
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/python${PYV}/site-packages/Hamlib.pyo
+fi
+
+if [ x"${PY3_MOD}" = x"yes" ]; then
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/python${PYV}/site-packages/_Hamlib.la
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/python${PYV}/site-packages/__pycache__/Hamlib.cpython-36.opt-1.pyc
+fi
+
+if [ x"${TCL_MOD}" = x"yes" ]; then
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/tcl${TCLV}/Hamlib/hamlibtcl.la
+fi
+
+if { [ x"${LUA_VER}" = x"5.2" ] || [ x"${LUA_VER}" = x"5.3" ]; } then
+  rm -f $PKG/usr/lib${LIBDIRSUFFIX}/lua/${LUA_VER}/Hamliblua.la
+fi
+
+rm -f $PKG/usr/lib*/*.la
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/doinst.sh > $PKG/install/douninst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE

hamlib/hamlib.info

@@ -0,0 +1,10 @@
+PRGNAM="hamlib"
+VERSION="3.3"
+HOMEPAGE="http://www.hamlib.org"
+DOWNLOAD="https://sourceforge.net/projects/hamlib/files/hamlib/3.3/hamlib-3.3.tar.gz"
+MD5SUM="2faa2894a61ed0ef307740aa6e3b73e4"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="JK Wood"
+EMAIL="joshuakwood@gmail.com"

hamlib/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+hamlib: hamlib (the ham radio control libraries)
+hamlib:
+hamlib: Hamlib is a development effort to provide a consistent C language
+hamlib: interface for programmers wanting to incorporate radio controls in
+hamlib: their programs.  Language bindings for C++, Perl, Python, and TCL
+hamlib: are included along with network daemons for radio and rotator
+hamlib: control.
+hamlib:
+hamlib: Homepage: http://www.hamlib.org
+hamlib:
+hamlib: