Added info about tags in default branch.

README.md

@@ -12,8 +12,6 @@
 * usb phone charger as power supply
 * 2 push buttons
 * 1 on/off switch
-* 1 photoresistor
-* 1 resistor to make secund shoulder of photosensitive "bridge", 10 kOhms, 0.25 watts
 * Gainta G521G enclosure (92x66.5x28мм)
 * 5m power cord
 
@@ -26,3 +24,12 @@
 ### Additional Notes:
 
 My RTC module is not very accurate due to bad quartz chrystal calibration, looks like it is not exactly 32768 Hz and clock runs faster than it should be, giving about 5-8 seconds runaway per day. So i have to implement time correction in software (temperature changes during day/month/year is not very big - about 10 degrees Celsius, so we can use software compensation without thermal compensation).
+
+This project split into 2 branches:
+
+* **default** that contains generic clock without any additional elements
+* **photoresistor** that contains additional hardware - photocell bridge - and software algorithm that compensates ambient light sensed by photocell basing on LED display charachteristics.
+
+### Stable tags for branches:
+v1.5 - default
+v1.4 - photoresistor

simpleclock.ino

@@ -6,33 +6,6 @@
  * 2 buttons for adjusting time.
  */
 
-/* This software distributed under BSD 2 Clause License
- *
- * Copyright (c) Sergei Fedosoff, All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this listof conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITYOF SUCH DAMAGE.
- */
-
 /* DS1307 lib by FrankieChu for Seeed RTC module, in my case
  * Grove___RTC_DS1307-1.0.0.zip */
 #include <DS1307.h>
@@ -43,7 +16,7 @@ SevSeg Display;
 
 /* push button stuff */
 const long initial_delay = 600;   // wait a bit before spin numbers
-const long adjust_interval = 200; // delay between consecutive number increnents
+const long adjust_interval = 200; // delay between consecutive number increments
 const long bounce_delay = 20;     // contact bounce compensation
 const int hrs_btn = A0;           // put hour adjusting button on A0 lane
 const int min_btn = A1;           // put minute adjusting button on A1 lane
@@ -60,11 +33,7 @@ const long interval = 500;
 bool dot = true;
 
 /* time inaccuracy compensation flag */
-uint8_t compflag = 0;
+bool compflag = true;
-const uint8_t timeSkew = 6; // assume that clock runs faster than should
-
-/* ambient light compensation aka night mode */
-const int photoPin = A2;
 
 void setup()
 {
@@ -74,12 +43,7 @@ void setup()
 	byte digitPins[] = {9, 10, 11, 12};
 	byte segmentPins[] = {2, 3, 4, 5, 6, 7, 8, 13};
 	bool resistorsOnSegments = true; // 8 resistors, 330 Ohms each
-        /* updateWithDelays defaults to false and it is recommended value,
+	bool updateWithDelays = false;   // Default. Recommended
-	 * but i was unable to make my display to change brightness with
-	 * recommended value, so i have to use updateWithDelays=true,
-	 * in this case brightness gets changed.
-	 */
-	bool updateWithDelays = true;   // Default. Recommended
 
 	/* without it there is visual bug at 0 o'clock, and in current version
 	 * of SevSeg' setChars() does not dots at all */
@@ -105,9 +69,6 @@ void setup()
 	// setup control buttons
 	pinMode(hrs_btn, INPUT_PULLUP);
 	pinMode(min_btn, INPUT_PULLUP);
-
-	// setup brigtness sensor
-	pinMode(photoPin, INPUT);
 }
 
 void loop()
@@ -116,7 +77,6 @@ void loop()
 	currentPushTimer = currentMillis;
 	char str[4];
 	float d;
-	unsigned int ambLight = analogRead(photoPin);
 
 	clock.getTime();
 
@@ -174,15 +134,15 @@ void loop()
 	 */
 
 	if ((clock.hour == 21) and (clock.minute == 21) and
-            (clock.second == 21) and (compflag == 0)) {
+	    (clock.second == 21) and (compflag)) {
-		clock.fillByHMS(clock.hour, clock.minute, (clock.second - timeSkew));
+		clock.fillByHMS(clock.hour, clock.minute, 14);
 		clock.setTime();
-		compflag = 1;
+		compflag = false;
 	}
 
 	if ((clock.hour == 21) and (clock.minute == 21) and
-            (clock.second == 23) and (compflag == 1)) {
+	    (clock.second == 23) and (!compflag)) {
-		compflag = 0;
+		compflag = true;
 	}
 
 	// make blinking dot
@@ -204,31 +164,6 @@ void loop()
 		}
 	}
 
-	/* ambient light compensation
-	 * ambLight can be in range of 0..1023, if it 800, it has point to use fullbright
-	 */
-	if (ambLight >= 940) {
-		Display.setBrightness(100);
-	} else if ((ambLight < 900) and (ambLight >= 840)) {
-		Display.setBrightness(95);
-	} else if ((ambLight < 800) and (ambLight >= 735)) {
-		Display.setBrightness(70);
-	} else if ((ambLight < 700) and (ambLight >= 635)) {
-		Display.setBrightness(25);
-	} else if ((ambLight < 600) and (ambLight >= 530)) {
-		Display.setBrightness(15);
-	} else if ((ambLight < 500) and (ambLight >= 430)) {
-		Display.setBrightness(12);
-	} else if ((ambLight < 400) and (ambLight >= 325)) {
-		Display.setBrightness(10);
-	} else if ((ambLight < 300) and (ambLight >= 220)) {
-		Display.setBrightness(8);
-	} else if ((ambLight < 200) and (ambLight >= 110)) {
-		Display.setBrightness(7);
-	} else if (ambLight < 100) {
-		Display.setBrightness(6);
-	}
-
 	Display.refreshDisplay();
 }