Update README.md

* Poll RTC by trigger, set via ISR
* Change blink state by trigger, set via ISR
* Set time compensation trigger in ISR
* Refresh clock by timer
* Re-calculate displayed time only ater rtcsync or when time adjusted by buttons
* Simplify draw algo

README.md

@@ -12,8 +12,6 @@
 * usb phone charger as power supply
 * 2 push buttons
 * 1 on/off switch
-* 1 photoresistor
-* 1 resistor to make secund shoulder of photosensitive "bridge", 10 kOhms, 0.25 watts
 * Gainta G521G enclosure (92x66.5x28мм)
 * 5m power cord
 
@@ -26,3 +24,12 @@
 ### Additional Notes:
 
 My RTC module is not very accurate due to bad quartz chrystal calibration, looks like it is not exactly 32768 Hz and clock runs faster than it should be, giving about 5-8 seconds runaway per day. So i have to implement time correction in software (temperature changes during day/month/year is not very big - about 10 degrees Celsius, so we can use software compensation without thermal compensation).
+
+This project split into 2 branches:
+
+* **default** that contains generic clock without any additional elements
+* **photoresistor** that contains additional hardware - photocell bridge - and software algorithm that compensates ambient light sensed by photocell basing on LED display charachteristics.
+
+### Stable tags for branches:
+v1.6 - default
+v1.7 - photoresistor

simpleclock.ino

@@ -6,33 +6,12 @@
  * 2 buttons for adjusting time.
  */
 
-/*
+/* DS1307 lib by FrankieChu for Seeed RTC module, in my case
- * uRTCLib
+ * Grove___RTC_DS1307-1.0.0.zip */
- * https://github.com/Naguissa/uRTCLib
+#include <DS1307.h>
- * it has support for both DS1307 and DS3231, that i own.
- * It is more fat than ds1307-dedicated or ds3231-dedicated lib, but i do not
- * want to invent wheel if i have one.
- */
-#include <uRTCLib.h>
-
-/*
- * SevSeg
- * https://github.com/DeanIsMe/SevSeg
- * it has simple api and ideally works in my case
- */
 #include <SevSeg.h>
 
-/* disable time compensation
+DS1307 clock;
- * as we borrow more accurate chrystal and solder it to rtc breakboard
- */
-//#define TIMECOMP
-/* 0.5 second/day compensation flag */
-//#define OFIVECOMP
-
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-
-uRTCLib clock;
 SevSeg Display;
 
 /* push button stuff */
@@ -47,24 +26,11 @@ unsigned long previousPushTimer = 0;
 /* dot blinking stuff */
 volatile bool dot = true;
 
-#ifdef TIMECOMP
 /* time inaccuracy compensation flag */
 volatile bool compflag1 = true;
 volatile bool compflag2 = false;
-const uint8_t timeSkew = 9;          // assume that clock runs faster than should
+const uint8_t timeSkew = 8;          // assume that clock runs faster than should
-#ifdef OFIVECOMP
 volatile bool timeSkewEven = false;  // comp. 1 additional second per 2 days
-#endif
-#endif
-
-/* ambient light compensation aka night mode */
-const int photoPin = A2;
-volatile bool measureAmbLight = true;
-unsigned int ambLight = 0;           // actual value
-unsigned int ambLight2 = 0;          // previous med. value
-unsigned int ambLight3 = 0;          // pre-previous med. value
-unsigned long previousLightTimer = 0;
-const long refresh_interval = 40;    // refresh rate 25Hz
 
 /* time vars */
 volatile uint8_t mysecond;
@@ -82,12 +48,7 @@ void setup()
 	byte digitPins[] = {9, 10, 11, 12};
 	byte segmentPins[] = {2, 3, 4, 5, 6, 7, 8, 13};
 	bool resistorsOnSegments = true; // 8 resistors, 330 Ohms each
-	/* updateWithDelays defaults to false and it is recommended value,
+	bool updateWithDelays = false;   // Default. Recommended
-	 * but i was unable to make my display to change brightness notably with
-	 * recommended value, so i have to use updateWithDelays=true,
-	 * in this case brightness gets changed.
-	 */
-	bool updateWithDelays = true;
 
 	/* without it there is visual bug at 0 o'clock, and in current version
 	 * of SevSeg' setChars() does not dots at all */
@@ -98,14 +59,16 @@ void setup()
 	Display.setBrightness(100);
 
 	// setup clock
-	Wire.begin();
+	clock.begin();
-	clock.set_rtc_address(0x68);
 
 	// if rtc returns incorrect time, reset it to some default value
-	clock.refresh();
+	clock.getTime();
 
-	if ((clock.hour() > 23) || (clock.minute() > 59)) {
+	if ((clock.hour > 23) || (clock.minute > 59)) {
-		clock.set(30, 52, 15, 6, 23, 2, 19); // Saturday, 23 Feb 2019 15:52:30
+		clock.fillByYMD(2019, 2, 23); // 23 Feb 2019
+		clock.fillByHMS(15, 52, 30);  // 15:52:30"
+		clock.fillDayOfWeek(SAT);     // Saturday
+		clock.setTime();              // put date to rtc
 	}
 
 	// setup control buttons
@@ -127,18 +90,6 @@ void setup()
 	TCCR1B |= (1 << CS12);    // 256 prescaler 
 	TIMSK1 |= (1 << TOIE1);   // enable timer overflow interrupt
 	interrupts();             // enable all interrupts
-
-/* increase sampling rate of analogRead()
- * by setting an ADC prescale from 128 to 16, so it takes less time to read
- * sensor
- */
-	sbi(ADCSRA, ADPS2);
-	cbi(ADCSRA, ADPS1);
-	cbi(ADCSRA, ADPS0);
-
-	// setup ambient brigtness sensor
-	pinMode(photoPin, INPUT);
-	ambLight = analogRead(photoPin);
 }
 
 ISR(TIMER1_OVF_vect)
@@ -154,69 +105,44 @@ ISR(TIMER1_OVF_vect)
 	else
 		dot = true;
 
-#ifdef TIMECOMP
 /* time compensation magic */
 	if ((myhour == 21) and (myminute == 21) and (mysecond == 21)
 	    and (compflag2)) {
 		compflag1 = true;
-#ifdef OFIVECOMP
 		(timeSkewEven) ? timeSkewEven = false : timeSkewEven;
-#endif
 	}
 
 	if ((myhour == 21) and (myminute == 21) and (mysecond == 23)) {
 		compflag1 = false;
 		compflag2 = true;
 	}
-#endif
 }
 
 void loop()
 {
 	unsigned long currentMillis = millis();
 
-#ifdef TIMECOMP
 /*
  * Let's implement time compenstion for individual rtc module time
  * charachteristics. In in my case quartz resonator as inaccurate as
- * about +9.5 seconds per 24 hours
+ * about +8.5 seconds per 24 hours
  */
 	if (compflag1 && compflag2) {
-#ifdef OFIVECOMP
 		if (timeSkewEven) {
-			clock.set(
+			clock.fillByHMS(myhour, myminute, (mysecond - timeSkew - 1));
-				(mysecond - timeSkew - 1),
-				clock.minute(),
-				clock.hour(),
-				clock.dayOfWeek(),
-				clock.day(),
-				clock.month(),
-				clock.year()
-			);
 		} else {
-#endif
+			clock.fillByHMS(myhour, myminute, (mysecond - timeSkew));
-			clock.set(
-				(mysecond - timeSkew),
-				clock.minute(),
-				clock.hour(),
-				clock.dayOfWeek(),
-				clock.day(),
-				clock.month(),
-				clock.year()
-			);
-#ifdef OFIVECOMP
 		}
-#endif
 
+		clock.setTime();
 		compflag2 = false;
 	}
-#endif
 
 	if (rtcsync) {
-		clock.refresh();
+		clock.getTime();
-		mysecond = clock.second();
+		mysecond = clock.second;
-		myminute = clock.minute();
+		myminute = clock.minute;
-		myhour = clock.hour();
+		myhour = clock.hour;
 		updateTimeStr(myhour, myminute);
 		rtcsync = false;
 	}
@@ -245,86 +171,21 @@ void loop()
 			if (digitalRead(hrs_btn) == LOW) {
 				myhour++;
 				(myhour > 23) ? myhour = 0 : myhour;
-				clock.set(
+				clock.fillByHMS(myhour, myminute, 0);
-					0,
+				clock.setTime();
-					myminute,
-					myhour,
-					clock.dayOfWeek(),
-					clock.day(),
-					clock.month(),
-					clock.year()
-				);
 			}
 
 			if (digitalRead(min_btn) == LOW) {
 				myminute++;
 				(myminute > 59) ? myminute = 0 : myminute;
-				clock.set(
+				clock.fillByHMS(myhour, myminute, 0);
-					0,
+				clock.setTime();
-					myminute,
-					myhour,
-					clock.dayOfWeek(),
-					clock.day(),
-					clock.month(),
-					clock.year()
-				);
 			}
 		}
 
 		updateTimeStr(myhour, myminute);
 	}
 
-	if ((currentMillis - previousLightTimer >= refresh_interval) or
-	    (previousLightTimer > currentMillis)) { // millis() reset every ~49 days
-		previousLightTimer = currentMillis;
-		ambLight = analogRead(photoPin);
-		ambLight = (ambLight + ambLight2 + ambLight3) / 3;
-
-/* Ambient light compensation
- * ambLight can be in range of 0..1023, if it 910+, it has point to use
- * fullbright.
- * Use table comparsion (not function of ambLight) because of non-linear
- * charachteristics of led indicator, that cannot be described via simple
- * formula.
- */
-		if (ambLight >= 910) {
-			Display.setBrightness(100);
-		} else if ((ambLight < 900) and (ambLight >= 860)) {
-			Display.setBrightness(75);
-		} else if ((ambLight < 850) and (ambLight >= 810)) { 
-			Display.setBrightness(45);
-		} else if ((ambLight < 800) and (ambLight >= 760)) {
-			Display.setBrightness(25);
-		} else if ((ambLight < 750) and (ambLight >= 710)) {
-			Display.setBrightness(18);
-		} else if ((ambLight < 700) and (ambLight >= 660)) {
-			Display.setBrightness(12);
-		} else if ((ambLight < 650) and (ambLight >= 610)) {
-			Display.setBrightness(10);
-		} else if ((ambLight < 600) and (ambLight >= 560)) {
-			Display.setBrightness(7);
-		} else if ((ambLight < 550) and (ambLight >= 410)) {
-			Display.setBrightness(4);
-		} else if ((ambLight < 400) and (ambLight >= 360)) {
-			Display.setBrightness(0);
-		} else if ((ambLight < 350) and (ambLight >= 310)) {
-			Display.setBrightness(-3);
-		} else if ((ambLight < 300) and (ambLight >= 260)) {
-			Display.setBrightness(-6);
-		} else if ((ambLight < 250) and (ambLight >= 210)) {
-			Display.setBrightness(-10);
-		} else if ((ambLight < 200) and (ambLight >= 160)) {
-			Display.setBrightness(-14);
-		} else if ((ambLight < 150) and (ambLight >= 110)) {
-			Display.setBrightness(-18);
-		} else if (ambLight < 100) {
-			Display.setBrightness(-22);
-		}
-
-		ambLight3 = ambLight2;
-		ambLight2 = ambLight;
-	}
-
 	Display.refreshDisplay();
 }
 
@@ -341,5 +202,4 @@ void updateTimeStr(uint8_t h, uint8_t m)
 	}
 }
 
-
 /* vim: set filetype=cpp: */